Hi Tony,
>-----Original Message-----
>From: Tony Lindgren [mailto:t...@atomide.com]
>Sent: Thursday, February 24, 2011 12:20 AM
>To: sricharan
>Cc: linux-omap@vger.kernel.org; santosh.shilim...@ti.com; p...@pwsan.com
>Subject: Re: [PATCH 5/5] omap2+: board-n8x0: Change the flags for the
>serial pads.
>
>* sricharan <r.sricha...@ti.com> [110127 21:05]:
>> The flag for remuxing uart3_rx_irxx pad is changed.
>>
>> Signed-off-by: sricharan <r.sricha...@ti.com>
>> ---
>> arch/arm/mach-omap2/board-n8x0.c | 2 +-
>> 1 files changed, 1 insertions(+), 1 deletions(-)
>>
>> diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-
>omap2/board-n8x0.c
>> index 9b52e2d..bd51356 100644
>> --- a/arch/arm/mach-omap2/board-n8x0.c
>> +++ b/arch/arm/mach-omap2/board-n8x0.c
>> @@ -751,7 +751,7 @@ static struct omap_board_mux board_mux[] __initdata
=
>{
>> static struct omap_device_pad serial2_pads[] __initdata = {
>> {
>> .name = "uart3_rx_irrx.uart3_rx_irrx",
>> - .flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
>> + .flags = OMAP_DEVICE_PAD_REMUX_IDLE |
>OMAP_DEVICE_PAD_WAKEUP,
>> .enable = OMAP_MUX_MODE0,
>> .idle = OMAP_MUX_MODE3 /* Mux as GPIO for idle */
>> },
>
>This should not be needed when rebased on my patch to replace patch 1/5.
>
Yes correct. This patch should not be needed now.
>Regards,
>
>Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
