Moving the definition of mux setting API from devices.c to hsmmc.c
and renaming it from "omap2_mmc_mux" to "omap_hsmmc_mux".
Also calling "omap_hsmmc_mux" from omap2_hsmmc_init.
Signed-off-by: Kishore Kadiyala <kishore.kadiy...@ti.com>
Cc: Chris Ball <c...@laptop.org
Cc: Tony Lindgren <t...@atomide.com
---
arch/arm/mach-omap2/devices.c | 83 ----------------------------------------
arch/arm/mach-omap2/hsmmc.c | 84 +++++++++++++++++++++++++++++++++++++++++
2 files changed, 84 insertions(+), 83 deletions(-)
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 100bb42..2f4a598 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -708,87 +708,6 @@ void __init omap242x_init_mmc(struct
omap_mmc_platform_data **mmc_data)
#if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
-static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
- int controller_nr)
-{
- if ((mmc_controller->slots[0].switch_pin > 0) && \
- (mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES))
- omap_mux_init_gpio(mmc_controller->slots[0].switch_pin,
- OMAP_PIN_INPUT_PULLUP);
- if ((mmc_controller->slots[0].gpio_wp > 0) && \
- (mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES))
- omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp,
- OMAP_PIN_INPUT_PULLUP);
- if (cpu_is_omap34xx()) {
- if (controller_nr == 0) {
- omap_mux_init_signal("sdmmc1_clk",
- OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_signal("sdmmc1_cmd",
- OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_signal("sdmmc1_dat0",
- OMAP_PIN_INPUT_PULLUP);
- if (mmc_controller->slots[0].caps &
- (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) {
- omap_mux_init_signal("sdmmc1_dat1",
- OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_signal("sdmmc1_dat2",
- OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_signal("sdmmc1_dat3",
- OMAP_PIN_INPUT_PULLUP);
- }
- if (mmc_controller->slots[0].caps &
- MMC_CAP_8_BIT_DATA) {
- omap_mux_init_signal("sdmmc1_dat4",
- OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_signal("sdmmc1_dat5",
- OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_signal("sdmmc1_dat6",
- OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_signal("sdmmc1_dat7",
- OMAP_PIN_INPUT_PULLUP);
- }
- }
- if (controller_nr == 1) {
- /* MMC2 */
- omap_mux_init_signal("sdmmc2_clk",
- OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_signal("sdmmc2_cmd",
- OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_signal("sdmmc2_dat0",
- OMAP_PIN_INPUT_PULLUP);
-
- /*
- * For 8 wire configurations, Lines DAT4, 5, 6 and 7
need to be muxed
- * in the board-*.c files
- */
- if (mmc_controller->slots[0].caps &
- (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) {
- omap_mux_init_signal("sdmmc2_dat1",
- OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_signal("sdmmc2_dat2",
- OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_signal("sdmmc2_dat3",
- OMAP_PIN_INPUT_PULLUP);
- }
- if (mmc_controller->slots[0].caps &
- MMC_CAP_8_BIT_DATA) {
- omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4",
- OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_signal("sdmmc2_dat5.sdmmc2_dat5",
- OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_signal("sdmmc2_dat6.sdmmc2_dat6",
- OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_signal("sdmmc2_dat7.sdmmc2_dat7",
- OMAP_PIN_INPUT_PULLUP);
- }
- }
-
- /*
- * For MMC3 the pins need to be muxed in the board-*.c files
- */
- }
-}
-
void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
int nr_controllers)
{
@@ -802,8 +721,6 @@ void __init omap2_init_mmc(struct omap_mmc_platform_data
**mmc_data,
if (!mmc_data[i])
continue;
- omap2_mmc_mux(mmc_data[i], i);
-
switch (i) {
case 0:
base = OMAP2_MMC1_BASE;
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index 5496bc7..1348ac3 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -16,7 +16,9 @@
#include <mach/hardware.h>
#include <plat/mmc.h>
#include <plat/omap-pm.h>
+#include <plat/mux.h>
+#include "mux.h"
#include "hsmmc.h"
#include "control.h"
@@ -204,6 +206,87 @@ static int nop_mmc_set_power(struct device *dev, int slot,
int power_on,
return 0;
}
+static inline void omap_hsmmc_mux(struct omap_mmc_platform_data
*mmc_controller,
+ int controller_nr)
+{
+ if ((mmc_controller->slots[0].switch_pin > 0) && \
+ (mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES))
+ omap_mux_init_gpio(mmc_controller->slots[0].switch_pin,
+ OMAP_PIN_INPUT_PULLUP);
+ if ((mmc_controller->slots[0].gpio_wp > 0) && \
+ (mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES))
+ omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp,
+ OMAP_PIN_INPUT_PULLUP);
+ if (cpu_is_omap34xx()) {
+ if (controller_nr == 0) {
+ omap_mux_init_signal("sdmmc1_clk",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc1_cmd",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc1_dat0",
+ OMAP_PIN_INPUT_PULLUP);
+ if (mmc_controller->slots[0].caps &
+ (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) {
+ omap_mux_init_signal("sdmmc1_dat1",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc1_dat2",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc1_dat3",
+ OMAP_PIN_INPUT_PULLUP);
+ }
+ if (mmc_controller->slots[0].caps &
+ MMC_CAP_8_BIT_DATA) {
+ omap_mux_init_signal("sdmmc1_dat4",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc1_dat5",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc1_dat6",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc1_dat7",
+ OMAP_PIN_INPUT_PULLUP);
+ }
+ }
+ if (controller_nr == 1) {
+ /* MMC2 */
+ omap_mux_init_signal("sdmmc2_clk",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc2_cmd",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc2_dat0",
+ OMAP_PIN_INPUT_PULLUP);
+
+ /*
+ * For 8 wire configurations, Lines DAT4, 5, 6 and 7
+ * need to be muxed in the board-*.c files
+ */
+ if (mmc_controller->slots[0].caps &
+ (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) {
+ omap_mux_init_signal("sdmmc2_dat1",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc2_dat2",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc2_dat3",
+ OMAP_PIN_INPUT_PULLUP);
+ }
+ if (mmc_controller->slots[0].caps &
+ MMC_CAP_8_BIT_DATA) {
+ omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc2_dat5.sdmmc2_dat5",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc2_dat6.sdmmc2_dat6",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("sdmmc2_dat7.sdmmc2_dat7",
+ OMAP_PIN_INPUT_PULLUP);
+ }
+ }
+
+ /*
+ * For MMC3 the pins need to be muxed in the board-*.c files
+ */
+ }
+}
+
static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata;
void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
@@ -361,6 +444,7 @@ void __init omap2_hsmmc_init(struct omap2_hsmmc_info
*controllers)
continue;
}
hsmmc_data[c->mmc - 1] = mmc;
+ omap_hsmmc_mux(hsmmc_data[c->mmc - 1], (c->mmc - 1));
}
omap2_init_mmc(hsmmc_data, OMAP34XX_NR_MMC);
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
