On Mon, Mar 07, 2011 at 07:23:15PM +0300, Sergei Shtylyov wrote:
> Hello.
> 
> On 07-03-2011 5:52, Nishanth Menon wrote:
> 
> >>>Blindly setting a 1.2V setting
> 
> >>Hm, seems tautological...
> 
> >As a non native English speaker, I would like to understand how we could
> >improve this. I suppose you mean "Blindly setting 1.2V" is better here. Am i
> >correct?
> 
>    Yes.
OK, here is the update as per the suggestion:
Regards,
Nishanth Menon
From: Nishanth Menon <n...@ti.com>
Date: Tue, 15 Feb 2011 09:37:18 +0530
Subject: [PATCH V4 3/19] OMAP3+: voltage: remove initial voltage

Blindly setting 1.2V in the initial structure may not even match the
default voltages stored in the voltage table which are supported for
the domain. For example, OMAP3430 core domain does not use 1.2V and
ends up generating a warning on the first transition.

Further, since omap2_set_init_voltage is called as part of the pm
framework's initialization sequence to configure the voltage required
for the current OPP, the call does(and has to) setup the system
voltage(curr_volt as a result) using the right mechanisms appropriate
for the system at that point of time. This also overrides
initialization we are currently doing in voltage.c making it
redundant. So, remove the wrong and redundant initialization.

Signed-off-by: Nishanth Menon <n...@ti.com>
---
 arch/arm/mach-omap2/voltage.c |    1 -
 1 files changed, 0 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
index 56961df..1b40aa0 100644
--- a/arch/arm/mach-omap2/voltage.c
+++ b/arch/arm/mach-omap2/voltage.c
@@ -116,7 +116,6 @@ static int __init _config_common_vdd_data(struct 
omap_vdd_info *vdd)
        sys_clk_speed /= 1000;
 
        /* Generic voltage parameters */
-       vdd->curr_volt = 1200000;
        vdd->volt_scale = vp_forceupdate_scale_voltage;
        vdd->vp_enabled = false;
 
-- 
1.7.1

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to