Paul,
On 3/10/2011 11:28 AM, [email protected] wrote:
-----Original Message-----
From: ext Paul Walmsley [mailto:[email protected]]
Sent: 10. maaliskuuta 2011 11:50
To: Jokiniemi Kalle (Nokia-MS/Tampere)
Cc: [email protected]; [email protected]; Koskinen Ilkka (Nokia-
MS/Tampere); [email protected]; [email protected]
Subject: Re: [PATCH 0/2] OMAP3: wdtimer: fix wdtimer blocking CORE idle
Thanks Kalle for tracking this down,
could you try this patch along with the patch from this message:
http://www.spinics.net/lists/linux-omap/msg48115.html
I have some question with that patch.
By using pm_runtime API, you are suppose to idle the whole IP.
In this case, just because you cannot idle a wdt that is running, it
works, but the point is that the pm_runtime state will not reflect the
HW state.
For pm_runtime point of view, the wdt is supposed to be fully idle (both
fclk and iclk). Whereas in that case, only the iclk will be gated.
Did I miss something?
Benoit
and see if it also fixes the problem?
It works as well it seems :)
I assume you prefer this fix to be applied, so I'll send patches on this.
- Kalle
This patch should also prevent the hwmod code from putting the WDT2 into
smart-idle mode.
- Paul
---
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 457df3e..4366b85 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -1294,6 +1294,7 @@ static struct omap_hwmod
omap3xxx_wd_timer2_hwmod = {
.slaves = omap3xxx_wd_timer2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_wd_timer2_slaves),
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
+ .flags = HWMOD_SWSUP_SIDLE,
};
/* UART common */
--
1.7.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
