On Thu, Mar 24, 2011 at 04:36:04PM +0530, Hema HK wrote:
> omap4430_phy_init() function can be called with no device pointer
> to powerdown the UTMI PHY during board init when USB is disabled.
> Fix the function accordingly.
>
> Signed-off-by: Hema HK <[email protected]>
> ---
> arch/arm/mach-omap2/omap_phy_internal.c | 44 ++++++++++++++++--------------
> 1 files changed, 23 insertions(+), 21 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/omap_phy_internal.c
> b/arch/arm/mach-omap2/omap_phy_internal.c
> index e2e605f..a959e2f 100644
> --- a/arch/arm/mach-omap2/omap_phy_internal.c
> +++ b/arch/arm/mach-omap2/omap_phy_internal.c
> @@ -50,34 +50,36 @@ int omap4430_phy_init(struct device *dev)
> {
> ctrl_base = ioremap(OMAP443X_SCM_BASE, SZ_1K);
> if (!ctrl_base) {
> - dev_err(dev, "control module ioremap failed\n");
> + printk(KERN_ERR "control module ioremap failed\n");
use pr_err()
> return -ENOMEM;
> }
> /* Power down the phy */
> __raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
> - phyclk = clk_get(dev, "ocp2scp_usb_phy_ick");
>
> - if (IS_ERR(phyclk)) {
> - dev_err(dev, "cannot clk_get ocp2scp_usb_phy_ick\n");
> - iounmap(ctrl_base);
> - return PTR_ERR(phyclk);
> - }
> + if (dev) {
you can avoid this nesting level:
if (!dev)
return;
--
balbi
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
