Hi, one Minor comment.
>-----Original Message----- >From: [email protected] >[mailto:[email protected]] On Behalf Of Andy Green >Sent: Friday, March 25, 2011 2:58 AM >To: [email protected]; [email protected] >Cc: [email protected]; [email protected]; >[email protected]; [email protected]; [email protected]; >[email protected]; Alan Cox; Andy Green >Subject: [RFC PATCH 2/2] OMAP2+: PANDA: Fix up random or >missing MAC addresses for eth0 and wlan0 > >This patch registers a network device notifier callback to set the mac >addresses for the onboard network assets of Panda correctly, >despite the >drivers involved have used a random or all-zeros MAC address. > >The technique was suggested by Alan Cox on lkml. > >It works by device path so it corrects the MAC addresses even if the >drivers are in modules loaded in an order that changes their interface >name from usual (eg, the onboard module might be "wlan1" if there is a >USB wireless stick plugged in and its module is inserted first.) > >Cc: Alan Cox <[email protected]> >Signed-off-by: Andy Green <[email protected]> >--- > > arch/arm/mach-omap2/board-omap4panda.c | 91 >++++++++++++++++++++++++++++++++ > 1 files changed, 91 insertions(+), 0 deletions(-) > >diff --git a/arch/arm/mach-omap2/board-omap4panda.c >b/arch/arm/mach-omap2/board-omap4panda.c >index 80b8860..0b92873 100644 >--- a/arch/arm/mach-omap2/board-omap4panda.c >+++ b/arch/arm/mach-omap2/board-omap4panda.c >@@ -28,9 +28,12 @@ > #include <linux/regulator/machine.h> > #include <linux/regulator/fixed.h> > #include <linux/wl12xx.h> >+#include <linux/netdevice.h> >+#include <linux/if_ether.h> > > #include <mach/hardware.h> > #include <mach/omap4-common.h> >+#include <mach/id.h> > #include <asm/mach-types.h> > #include <asm/mach/arch.h> > #include <asm/mach/map.h> >@@ -506,6 +509,92 @@ static inline void board_serial_init(void) > } > #endif > >+/* >+ * These device paths represent the onboard USB <-> Ethernet >bridge, and >+ * the WLAN module on Panda, both of which need their random >or all-zeros >+ * mac address replacing with a per-cpu stable generated one >+ */ >+ >+static const char * const panda_fixup_mac_device_paths[] = { >+ "usb1/1-1/1-1.1/1-1.1:1.0", >+ "mmc1:0001:2", >+}; >+ >+static int panda_device_path_need_mac(struct device *dev) >+{ >+ const char **try = panda_fixup_mac_device_paths; >+ const char *path; >+ int count = ARRAY_SIZE(panda_fixup_mac_device_paths); >+ const char *p; >+ int len; >+ struct device *devn; >+ >+ while (count--) { >+ >+ p = *try + strlen(*try); >+ devn = dev; >+ >+ while (devn) { >+ >+ path = dev_name(devn); >+ len = strlen(path); >+ >+ if ((p - *try) < len) { >+ devn = NULL; >+ continue; >+ } >+ >+ p -= len; >+ >+ if (strncmp(path, p, len)) { >+ devn = NULL; >+ continue; >+ } >+ >+ devn = devn->parent; >+ if (p == *try) >+ return count; >+ >+ if (devn != NULL && (p - *try) < 2) >+ devn = NULL; >+ >+ p--; >+ if (devn != NULL && *p != '/') >+ devn = NULL; >+ } >+ >+ try++; >+ } >+ >+ return -ENOENT; >+} >+ >+static int omap_panda_netdev_event(struct notifier_block *this, >+ unsigned long >event, void *ptr) >+{ >+ struct net_device *dev = ptr; >+ struct sockaddr sa; >+ int n; >+ >+ if (event != NETDEV_REGISTER) >+ return NOTIFY_DONE; >+ >+ n = panda_device_path_need_mac(dev->dev.parent); >+ if (n >= 0) { >+ sa.sa_family = dev->type; >+ omap2_die_id_to_ethernet_mac(sa.sa_data, n); >+ dev->netdev_ops->ndo_set_mac_address(dev, &sa); >+ } >+ >+ return NOTIFY_DONE; >+} >+ >+static struct notifier_block omap_panda_netdev_notifier = { >+ .notifier_call = omap_panda_netdev_event, >+ .priority = 1, >+}; >+ >+ One extra blank line not needed. Regards, Hema > static void __init omap4_panda_init(void) > { > int package = OMAP_PACKAGE_CBS; >@@ -517,6 +606,8 @@ static void __init omap4_panda_init(void) > if (wl12xx_set_platform_data(&omap_panda_wlan_data)) > pr_err("error setting wl12xx data\n"); > >+ register_netdevice_notifier(&omap_panda_netdev_notifier); >+ > omap4_panda_i2c_init(); > platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices)); > platform_device_register(&omap_vwlan_device); > >-- >To unsubscribe from this list: send the line "unsubscribe >linux-omap" in >the body of a message to [email protected] >More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
