On Mon, 2011-05-02 at 20:22 +0530, Mayuresh Janorkar wrote:
> From: Mythri P K <mythr...@ti.com>
>
> A projector panel named picodlp is supported by OMAP.
> panel driver is required to be added with the name picodlp_panel.
>
> It is a WVGA panel with resolution 864 X 480 and panel timing data
> is defined in the panel driver.
>
> picodlp makes use of parallel (DPI) interface multiplexed with secondary lcd
> in case of OMAP4.
>
> Signed-off-by: Mythri P K <mythr...@ti.com>
> Signed-off-by: Mayuresh Janorkar <ma...@ti.com>
> ---
> Changes since v1:
> 1. Removed msleep
>
> drivers/video/omap2/displays/panel-picodlp.c | 226
> ++++++++++++++++++++++++++
> 1 files changed, 226 insertions(+), 0 deletions(-)
> create mode 100644 drivers/video/omap2/displays/panel-picodlp.c
<snip>
> +static void picodlp_panel_disable(struct omap_dss_device *dssdev)
> +{
> + struct picodlp_data *picod = dev_get_drvdata(&dssdev->dev);
> +
> + mutex_lock(&picod->lock);
> + /* Turn off DLP Power */
> + if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
> + picodlp_panel_power_off(dssdev);
> +
> + dev_dbg(&dssdev->dev, " disabling picodlp panel\n");
> + dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
> +
> + mutex_unlock(&picod->lock);
Many of the debug prints in this file have an extra space in the
beginning of the string, like above.
You should try to keep the code inside lock and unlock as minimal as
possible. Here the dev_dbg() could as well be outside the lock (granted,
dev_dbg() is a null op if DEBUG is not defined, but still).
Additionally, usually it's good to print the debug print before doing
the action, so here (and similar cases elsewhere in this file) it would
make sense to move the dev_dbg() before the lock.
> +}
> +
> +static int picodlp_panel_suspend(struct omap_dss_device *dssdev)
> +{
> + struct picodlp_data *picod = dev_get_drvdata(&dssdev->dev);
> +
> + mutex_lock(&picod->lock);
> + /* Turn off DLP Power */
> + if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) {
> + dev_dbg(&dssdev->dev, " unable to suspend picodlp panel,"\
> + " panel is not ACTIVE\n");
This is not a debug print, but an error. Similar problem in the function
below.
Tomi
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
