using 1.35V as a check is not correct, we know that beyond 0x39,
voltages are non linear - hence use the conversion iff uV greater
than that for 0x39. For example, with 709mV as the smps offset,
the max linear is actually 1.41V(0x39vsel)!
Signed-off-by: Nishanth Menon <n...@ti.com>
---
arch/arm/mach-omap2/omap_twl.c | 7 ++++++-
1 files changed, 6 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c
index 78fd985..fce7e6d 100644
--- a/arch/arm/mach-omap2/omap_twl.c
+++ b/arch/arm/mach-omap2/omap_twl.c
@@ -134,8 +134,13 @@ static u8 twl6030_uv_to_vsel(unsigned long uv)
* hardcoding only for 1.35 V which is used for 1GH OPP for
* OMAP4430.
*/
- if (uv == 1350000)
+ if (uv > twl6030_vsel_to_uv(0x39)) {
+ if (uv == 1350000)
+ return 0x3A;
+ pr_err("%s:OUT OF RANGE! non mapped vsel for %ld Vs max %ld\n",
+ __func__, uv, twl6030_vsel_to_uv(0x39));
return 0x3A;
+ }
if (smps_offset & 0x8)
return DIV_ROUND_UP(uv - 709000, 12660) + 1;
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
