Hi Govindraj,
On 6/8/2011 6:23 AM, Govindraj.R wrote:
[snip]
+
+#define OMAP_UART_AUTOSUSPEND_DELAY (30 * HZ) /* Value is msecs */
[snip]
@@ -1295,18 +1381,36 @@ static int serial_omap_probe(struct platform_device
*pdev)
up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE;
}
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_set_autosuspend_delay(&pdev->dev,
+ OMAP_UART_AUTOSUSPEND_DELAY);
Something is weird here...DEFAULT_AUTOSUSPEND_DELAY is defined as
(30*HZ) which would appear to be jiffies (ticks per second) and NOT
msecs. However, pm_runtime_set_autosuspend is clearly expecting msecs.
So this seems to conflict. By default 30*HZ for omap would be 30*128 =
3840ms so not quite 4 seconds.
What were you intending here?
Cheers
Jon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
