Hi Tony, Samuel, Would you have time to take a look at this series?
Thanks, Péter On Tuesday 21 June 2011 15:38:58 Ujfalusi, Peter wrote: > Hello, > > Changes since v5: > - Use alloc_workqueue in the twl6040-vibra driver (comment from Tejun Heo) > - Allow user to change the headset power mode, but if the change is not > allowed by the use case the change is not written to the HW (comment from > Mark Brown) > > Mark: I have added your acks for the patches, except for patch 15, where you > requested a change. > > Intro message from the v5 series: > The series will do five major things, and they are in one series, because > they pretty much depending on each other, so it is easier to handle them > together. > > 1. Move the common pmic related configurations out from the board files. > New twl-common.c/h file has been created for this purpose. > OMAP3 board files received two patches (pdata, and regualtor changes), OMAP4 > board files has been changed with one patch. > > 2. Rename the twl4030-codec MFD driver to twl4030-audio > Since the ASoC multicomponent introduction (2.6.37) the twl4030-codec MFD > dirver had been using twl4030-audio to register (twl4030-codec is the ASoC > codec driver). The documentation refers to this part of twl as audio block, > so it is better to rename the driver as well to avoid confusion. > > 3. Introduction of MFD driver for twl6040. > The TWL6040 audio IC has codec and vibra functionality. > Convert the existing ASoC codec driver to use the new MFD driver's > interface. > > 4. Vibrator driver for TWL6040 (Input/ForceFeedback driver) > The driver itself, and support for the vibrators in SDP4430 board. > > 5. Updates for twl6040 ASoC codec driver > HS ramp configuration, new ABE dais, updated sample rate constraints, > SDP4430 configuration. > > Regards, > Peter > > --- > Axel Castaneda Gonzalez (1): > ASoC: twl6040: Configure ramp step based on platform > > Liam Girdwood (3): > ASoC: twl6040: add all ABE DAIs > ASoC: twl6040: Support other sample rates in constraints. > ASoC: twl6040: set default constraints. > > Misael Lopez Cruz (5): > mfd: twl6040: Add initial support > ASoC: twl6040: Convert into TWL6040 MFD child > input: Add initial support for TWL6040 vibrator > ASoC: twl6040: Remove pll and headset mode dependency > OMAP4: SDP4430: Add twl6040 codec platform support > > Peter Ujfalusi (9): > OMAP: New twl-common for common TWL configuration > OMAP4: Move common twl6030 configuration to twl-common > OMAP3: Move common twl configuration to twl-common > OMAP3: Move common regulator configuration to twl-common > MFD: twl4030-codec: Rename internals from codec to audio > MFD: twl4030-codec -> twl4030-audio: Rename the driver > MFD: twl4030-audio: Rename platform data > MFD: twl6040: Change platform data for soc codec driver > OMAP4: SDP4430: Add twl6040 vibrator platform support > > arch/arm/mach-omap2/Makefile | 2 +- > arch/arm/mach-omap2/board-3430sdp.c | 89 +--- > arch/arm/mach-omap2/board-4430sdp.c | 187 ++---- > arch/arm/mach-omap2/board-cm-t35.c | 48 +-- > arch/arm/mach-omap2/board-devkit8000.c | 37 +-- > arch/arm/mach-omap2/board-igep0020.c | 44 +-- > arch/arm/mach-omap2/board-ldp.c | 15 +- > arch/arm/mach-omap2/board-omap3beagle.c | 60 +-- > arch/arm/mach-omap2/board-omap3evm.c | 67 +-- > arch/arm/mach-omap2/board-omap3pandora.c | 59 +-- > arch/arm/mach-omap2/board-omap3stalker.c | 70 +-- > arch/arm/mach-omap2/board-omap3touchbook.c | 57 +-- > arch/arm/mach-omap2/board-omap4panda.c | 149 +----- > arch/arm/mach-omap2/board-overo.c | 59 +-- > arch/arm/mach-omap2/board-rm680.c | 8 +- > arch/arm/mach-omap2/board-rx51-peripherals.c | 44 +-- > arch/arm/mach-omap2/board-zoom-peripherals.c | 88 +--- > arch/arm/mach-omap2/common-board-devices.c | 21 - > arch/arm/mach-omap2/common-board-devices.h | 26 +- > arch/arm/mach-omap2/twl-common.c | 304 ++++++++++ > arch/arm/mach-omap2/twl-common.h | 59 ++ > arch/arm/plat-omap/include/plat/irqs.h | 12 +- > drivers/input/misc/Kconfig | 13 +- > drivers/input/misc/Makefile | 1 + > drivers/input/misc/twl4030-vibra.c | 12 +- > drivers/input/misc/twl6040-vibra.c | 416 +++++++++++++ > drivers/mfd/Kconfig | 8 +- > drivers/mfd/Makefile | 3 +- > drivers/mfd/twl-core.c | 13 +- > drivers/mfd/twl4030-audio.c | 277 +++++++++ > drivers/mfd/twl4030-codec.c | 277 --------- > drivers/mfd/twl6040-core.c | 601 > +++++++++++++++++++ drivers/mfd/twl6040-irq.c | > 205 +++++++ include/linux/i2c/twl.h | 25 +- > .../linux/mfd/{twl4030-codec.h => twl4030-audio.h} | 16 +- > include/linux/mfd/twl6040.h | 261 ++++++++ > sound/soc/codecs/Kconfig | 3 +- > sound/soc/codecs/twl4030.c | 22 +- > sound/soc/codecs/twl6040.c | 628 > ++++++++------------ sound/soc/codecs/twl6040.h | > 118 ---- > sound/soc/omap/sdp3430.c | 2 +- > sound/soc/omap/sdp4430.c | 2 + > sound/soc/omap/zoom2.c | 2 +- > 43 files changed, 2635 insertions(+), 1775 deletions(-) > create mode 100644 arch/arm/mach-omap2/twl-common.c > create mode 100644 arch/arm/mach-omap2/twl-common.h > create mode 100644 drivers/input/misc/twl6040-vibra.c > create mode 100644 drivers/mfd/twl4030-audio.c > delete mode 100644 drivers/mfd/twl4030-codec.c > create mode 100644 drivers/mfd/twl6040-core.c > create mode 100644 drivers/mfd/twl6040-irq.c > rename include/linux/mfd/{twl4030-codec.h => twl4030-audio.h} (96%) > create mode 100644 include/linux/mfd/twl6040.h -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html