On 7/1/2011 9:40 AM, Kevin Hilman wrote:
On Fri, 2011-07-01 at 09:36 -0700, Kevin Hilman wrote:
Rajendra Nayak<rna...@ti.com>  writes:

This series adds base support needed to be able
to boot on a OMAP4460 device.
Patches are based on Benoit's for_3.0.1/7_hwmod_modulemode
branch and boot tested on both 4460sdp as well as 4430sdp.

Can you also briefly summarize the dependencies between this series an
Benoit's?   I'm assuming it is mainly because of the s/4430/44XX/
changes, and also avoiding conflicts in clockdomain and powerdomain data
files.

With that, you can add

Reviewed-by: Kevin Hilman<khil...@ti.com>

for the whole series.

oops, except for [7/7], where I agree with Tony.

As discussed off-list, lets just drop this patch all together and state
in [0/7] that there is a limitation that until we fix the hwmod fwk to
do lazy disable as Tony suggested, 4460 can only reliably boot at OPP50.

Sure, I'll re-post the series once I have Benoit's updated one's
to base on.

Thanks Kevin.


Kevin



--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to