Adaptation of dmtimer code to platform driver using omap_device and omap_hwmod abstraction. It also include pm-runtime and off-mode support.
Baseline: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git Branch: Master I have applied the patch series on top of Tony Lindgren's dmtimer patch series taken from git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git Branch:devel-timer Test Info: - OMAP4430SDP: Functional tests. - OMAP3430SDP: Functional and Off-mode tests. - OMAP2420SDP: Functional tests. - OMAP1710SDP: Boot test. v14: (1) Baselined on top of Tony Lindgren's latest timer patch series. (2) Context save/restore routines. (3) Off-mode support v13: (1) Handling of early timer removed because this is being taken care by Tony's patch series. (2) Timers reserved for clockevent/clocksource during early boot are registered and marked reserved. (3) Platform specific timer code merged to mach-omap2/timer.c. (4) Timer capabilities are added in the hwmod database to each of the omap timers. (5) plat-omap/dmtimer.c plat-omap/include/plat/dmtimer.h are converted to a driver by moving them to drivers/misc/timer-omap.c and include/linux/timer-omap.h v12: (1) Remove registration and initialization of all timers during early boot. Initialize only the system timer which is set by the board file or default value assigned to it. This timer is not considered later during rest of the timers initialization. (2) Use mutex instead of spinlock since there is no interrupt context. (3) Remove hacky code to manage GPTIMER12 in mach-omap2/dmtimer.c. This is now changed to use dev_attr instead to identify if it is a secure timer. In the hwmod database, any secure timer entry can use this dev_attr so that driver avoids registering tha particular timer. (4) Removed reset function from OMAP1 and kept it back to its original place in plat-omap/dmtimer.c, with modification of course. Instead of (is_omap16xx) flag a new variable (needs_manual_reset) added. This flag is set for OMAP1. So, call to reset function is made if this value is set implying that reset is called only for OMAP1. (5) Timer enable and disable functions cleanup with checks for early boot condition removed. Added new interface wrapper function to configure system timer clock source. (6) Move OMAP4 specific register offsets from mach-omap2 to driver code along with other register offset definitions. (7) omap2_dm_timer_early_init() renamed to omap2_system_timer_init(), omap2_dm_timer_normal_init() renamed to omap2_dm_timer_init(). (8) Use dev_err() instead of pr_err() in low level read/write functions. v11: (1) Removed early timer initialization call from omap2_init_common_devices() in io.c. It is now called from omap2_gp_timer_init() in timer-gp.c as part of following call sequence: start_kernel()->time_init()->timer->init()->omap2_gp_timer_init() (2) Basedlined on top of Paul's patch series mentioned above. v10: (1) Update PM runtime for active early timers so that PM runtime userspace info is correct. (2) Include code to configure timers to POSTED mode which got missed in the previous version. (3) Remove pm runtime_enable from OMAP1 specific code since this is not applicable. v9: (1) In OMAP3 hwmod database, added entry for timer12 which was missing. Beagle board uses timer12 as its millisecond timer. (2) In OMAP3 hwmod database, rectified in-correct prcm configurations for timer10 and timer11. From: .prcm = { .module_bit = OMAP24XX_EN_GPT10_SHIFT, .idlest_idle_bit = OMAP24XX_ST_GPT10_SHIFT, }, To: .prcm = { .module_bit = OMAP3430_EN_GPT10_SHIFT, .idlest_idle_bit = OMAP3430_ST_GPT10_SHIFT, }, (3) In OMAP3 hwmod database, removed timer master port entry for all timers because it is not supported. static struct omap_hwmod_ocp_if *omap3xxx_timer7_masters[] = { &omap3xxx_l4_per__timer7, }; (4) In OMAP4 hwmod database, added SIDLE_SMART_WKUP flag for non-millisecond timers. (5) In OMAP3 hwmod database, rectified sysconfig configuration for non-millisecond timers. From: omap_hwmod_sysc_type2 To: omap_hwmod_sysc_type1. This was preventing system to go to RETENTION and OFF modes. v8: (1) Baselined on Tony's tree in omap-for-linus branch (2) The last patch in v7 series has been removed because it is fixed by following patch: commit: 78f26e872f77b6312273216de1a8f836c6f2e143 OMAP: hwmod: Set autoidle after smartidle during _sysc_enable v7: (1) In omap1_dm_timer_set_src(), the computation of shift value to respective dmtimer clock source was corrected: From: int n = (pdev->id) << 1; To: int n = (pdev->id - 1) << 1; This change is needed because dmtimer is indexed from 1 now instead of 0. (2) In omap1_dm_timer_init(void) memory resource end address chnaged: From: res[0].end = base + 0xff; To: res[0].end = base + 0x46; This was causing request_mem_region() failure in driver probe(). (3) In the export APIs there are some calls which are not applicable to OMAP1. They have been made conditional now. They include following calls: timer->fclk = clk_get(&timer->pdev->dev, "fck"); omap_dm_timer_enable() omap_dm_timer_disable() (4) Remove usage of cpu_is_omap16xx() and instead a flag has been added in struct dmtimer_platform_data { ... u32 is_omap16xx:1; } This flag is set to 1 in mach-omap1/dmtimer.c and set to 0 in mach-omap2/dmtimer.c This flag is used in plat-omap/dmtimer.c wherever it needs to distiguish omap16xx. (5) Remove #include <plat/omap_device.h> from mach-omap1/dmtimer.c (6) Instead of using macros like INT_24XX_GPTIMERx, use the numbers directly in OMAP2420, OMAP2430 and OMAP3xxx hwmod database. (7) pm_runtime_get_sync() and pm_runtime_put_sync() return value check modified from positive to negative value: if (pm_runtime_get_sync(...) < 0) { ... } v6: (1) Removed reset functions to mach-omap1/dmtimer.c. Access to reset function from plat-omap/dmtimer.c is provided by means of function pointer. (2) Remove multiple calls to omap_device_build() for registering timer devices during early and regular initialization. Regular device registration is now done by reading data from temporary list. This list is populated during early init where timer data is read from hwmod database and corresponding memory allocated. (3) kfree(pdata) under error condition since platform_device_unregister does not free its pdata. (4) Removed extra header inclusion in mach-omap2 and plat-omap NOTE: omap_dm_timer.<id> field could not be removed because during regular boot there is no mechanism to match the current pdev with corresponding entry in the timer list which was partially initialized during early boot. v5: (1) In mach-omap2/dmtimer.c merged the merged two different init functions into a single one, viz: omap_timer_init(*oh, *user). Now this function is used both during early init and later. The distinction is between the two is made thriugh the *user field. (2) Added timeout to low-level access routines in place of infinite while loop which waits on write-pend register bit. (3) Modified devices names from "omap-timer.x" to "omap_timer.x" (4) Modified module description from "OMAP DUAL MODE TIMER DRIVER" to: MODULE_DESCRIPTION("OMAP Dual-Mode Timer Driver"); (5) Use well-defined constants for new IP revision register constants instead of hard-coded values. (6) Use consistent naming mechanism by using _dm_timer_ instead of _dmtimer_ wherever applicable. (7) Removed id field from omap_dm_timer{} since the same can be obtained from pdev. (8) clk_get() and clk_put() moved from probe() and remove() functions. Now clk_get() is called when timer is acquired in the omap_dm_timer_prepare() and clk_put() is called in omap_dm_timer_free(). (9) Incorporated general comments: (i) Redundant Copyright information. (ii) Typos in comments. (iii) Modify subjects for hwmod database related patches. (iv) Remove redundant comments from hwmod database as they would be lost during auto-generation in the future. v4: (1) clock aliases are renamed as "32k_ck", "sys_ck" and "alt_ck" (2) incorporate missing clk_put() for corresponding clk_get() (3) modified clk_get()/clk_put() to be called once once in platform driver. (4) consistent header for new files (5) check return value of omap_hwmod_for_each_by_class() in device init routines. (6) remove is_abe_timer field in dmtimer_platform_data structure. this is no longer needed with new input clock source aliasing. (7) proper splitting of patch series (8) remove register map from hwmod database. (9) remove clock source strings array from hwmod database and associated structure declaration from plat/dmtimer.h. this is no longer needed. (10) remove dev_attr from hwmod database. this is no longer needed. (11) use register offsets to identify OMAP 4 registers instead of register map. (12) remove clock source name strings from hwmod database. (13) introduce new mechanism for getting struct clk associated with clock source names. this is achieved by adding clock alisases for all supported clock sources. (14) remove clock setup functions in mach-omap2 for populating struct clk associated with all input clock sources because this is no longer needed with above implementation. (15) device names changed from dmtimer to omap-timer (16) device index starts from 1 instead of 0 (17) remove .init_name from hwmod database. this is not needed. (18) introduce separate functions for reading/writing interrupt registers instead of doing all operations within a single function. v3: (1) multi-line comment error correction (2) provision to allow any of the available dmtimers as early timers instead of restricting them to millisecond timers only. (3) in 'struct omap_dmtimer{}' is_initialized flag is redundant and so must be removed. if the element is found in the list it is already initialized. (4) remove 'found' flag in omap_dm_timer_request() and omap_dm_timer_request_specific() functions. this is not needed with alternate implementation. (5) use .init_name to initialize device names so that it can be identified during early boot as well. This is to avoid duplicate functions for clock manipulations during early boot and later. (6) remove redundant functions from mach-omap2 which are created just to call pm functions like: pm_runtime_get_sync(),pm_runtime_put_sync(),.. and instead call them directly from plat-omap function api's. (7) timer clock source names made part of hwmod database. source_clock[] of type 'struct clk' is made part of platform data. (8) clockactivity field initialized in hwmod database to preserve fclk during idle. code which manipulate OCP config removed since they are already taken care by hwmod framework. (9) omap2_dm_timer_set_src() is optimized. Clock enable/disbale routines moved to plat-omap layer and simplfied to the level so as not to sacrifice intended functionality. NOTE: During early boot clock management was requested to be placed upon client drivers responsibility. this has not been done keeping in mind that it would entail (i) multiple modifications of client drivers (ii) it would violate the purpose of having a framework (open to debate). (10) dmtimer register maps moved to hwmod database v2: (1) removed dedicated functions for early timer clock access. instead, now we have common functions for early and normal timers. (2) removed usage of clock source strings for reading corresponding struct clks. this is now achieved through clock aliases introduced for each input clock sources. (3) IP revision to distinguish new IP standard and the rest and then initialize dmtimer interrupt and functional offsets. (4) provision to initialize all dmtimers as early timers. (5) remove dm_timer_setup() function because this is no longer needed. (6) modify the device index to start from 1 instead of 0. (7) device name changed from dmtimer to omap-timer (8) extract device ids' from hwmod name and same used for device build. (9) additional resource allocation checks and free (10) early timer variable initialization (11) initialize timer_ip_type and register offsets in platform data structure. (12) some more comments/logs Tarun Kanti DebBarma (12): OMAP2+: dmtimer: add device names to flck nodes OMAP4: hwmod data: add dmtimer version information OMAP1: dmtimer: conversion to platform devices OMAP2+: dmtimer: convert to platform devices OMAP: dmtimer: platform driver OMAP: dmtimer: switch-over to platform device driver OMAP: dmtimer: pm_runtime support OMAP: dmtimer: add timeout to low-level routines OMAP: dmtimer: use mutex instead of spinlock OMAP: dmtimer: mark clocksource and clockevent timers reserved OMAP: dmtimer: add context save/restore routines OMAP: dmtimer: Off mode support arch/arm/mach-omap1/Makefile | 2 +- arch/arm/mach-omap1/timer.c | 176 +++++++ arch/arm/mach-omap2/clock2420_data.c | 52 ++- arch/arm/mach-omap2/clock2430_data.c | 48 ++ arch/arm/mach-omap2/clock3xxx_data.c | 36 ++ arch/arm/mach-omap2/clock44xx_data.c | 33 ++ arch/arm/mach-omap2/omap_hwmod_2420_data.c | 22 + arch/arm/mach-omap2/omap_hwmod_2430_data.c | 22 + arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 27 ++ arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 24 + arch/arm/mach-omap2/timer.c | 201 ++++++++- arch/arm/plat-omap/dmtimer.c | 688 ++++++++++++++++------------ arch/arm/plat-omap/include/plat/dmtimer.h | 173 ++++++-- 13 files changed, 1152 insertions(+), 352 deletions(-) create mode 100644 arch/arm/mach-omap1/timer.c -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html