From: Jon Hunter <jon-hun...@ti.com>
This is a continuation of Mike Turquette's patch "OMAP3+: use
DPLL's round_rate when setting rate".
omap3_noncore_dpll_set_rate() and omap3_noncore_dpll_enable() call
omap2_get_dpll_rate() explicitly. It may be necessary for some
DPLLs to use a different function and so use the DPLLs recalc()
function pointer instead.
An example is the DPLL_ABE on OMAP4 which can have a 4X multiplier
in addition to the usual MN multipler and dividers and therefore
uses a different round_rate and recalc function.
Signed-off-by: Jon Hunter <jon-hun...@ti.com>
---
arch/arm/mach-omap2/dpll3xxx.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c
index 73a1595..7916f66 100644
--- a/arch/arm/mach-omap2/dpll3xxx.c
+++ b/arch/arm/mach-omap2/dpll3xxx.c
@@ -390,7 +390,7 @@ int omap3_noncore_dpll_enable(struct clk *clk)
* propagating?
*/
if (!r)
- clk->rate = omap2_get_dpll_rate(clk);
+ clk->rate = clk->recalc(clk);
return r;
}
@@ -435,7 +435,7 @@ int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned
long rate)
if (!dd)
return -EINVAL;
- if (rate == omap2_get_dpll_rate(clk))
+ if (rate == clk->recalc(clk))
return 0;
/*
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
