Prepare board-omap4panda for joing other similar boards.
Split common stuff into board-omap4panda-common.
MUX: board_mux and omap4_panda_mux
omap4_common_preinit: for muxing
omap4_common_init: all common devices
struct panda_board_data: gpios, omap_board_data, i2c_board_info ...
some inititialisation check if omap4_panda_config entry is valid
i2c_2_board_speed == 0 -> i2c_2 not used
hup_power_gpio == -EINVAL -> gpio not used
Signed-off-by: Jan Weitzel <j.weit...@phytec.de>
---
arch/arm/mach-omap2/Makefile | 1 +
arch/arm/mach-omap2/board-omap4panda-common.c | 380 ++++++++++++++++++++++
arch/arm/mach-omap2/board-omap4panda-common.h | 39 +++
arch/arm/mach-omap2/board-omap4panda.c | 421 +++++--------------------
4 files changed, 496 insertions(+), 345 deletions(-)
create mode 100644 arch/arm/mach-omap2/board-omap4panda-common.c
create mode 100644 arch/arm/mach-omap2/board-omap4panda-common.h
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 2d4d18e..5d829d6 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -237,6 +237,7 @@ obj-$(CONFIG_MACH_OMAP_4430SDP) +=
board-4430sdp.o \
hsmmc.o \
omap_phy_internal.o
obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o \
+ board-omap4panda-common.o \
hsmmc.o \
omap_phy_internal.o
diff --git a/arch/arm/mach-omap2/board-omap4panda-common.c
b/arch/arm/mach-omap2/board-omap4panda-common.c
new file mode 100644
index 0000000..bcf8776
--- /dev/null
+++ b/arch/arm/mach-omap2/board-omap4panda-common.c
@@ -0,0 +1,380 @@
+/*
+ * Board support file for OMAP4430 based PandaBoard.
+ *
+ * Copyright (C) 2010 Texas Instruments
+ *
+ * Author: David Anders <x0132...@ti.com>
+ *
+ * Based on mach-omap2/board-4430sdp.c
+ *
+ * Author: Santosh Shilimkar <santosh.shilim...@ti.com>
+ *
+ * Based on mach-omap2/board-3430sdp.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/usb/otg.h>
+#include <linux/i2c/twl.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/wl12xx.h>
+
+#include <mach/hardware.h>
+#include <mach/omap4-common.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <video/omapdss.h>
+
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/usb.h>
+#include <plat/mmc.h>
+#include <video/omap-panel-generic-dpi.h>
+
+#include "hsmmc.h"
+#include "control.h"
+#include "mux.h"
+#include "common-board-devices.h"
+#include "board-omap4panda-common.h"
+
+struct panda_board_data *board_config;
+
+void omap4_common_hdmi_mux_init(void)
+{
+ /* PAD0_HDMI_HPD_PAD1_HDMI_CEC */
+ omap_mux_init_signal("hdmi_hpd",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("hdmi_cec",
+ OMAP_PIN_INPUT_PULLUP);
+ /* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */
+ omap_mux_init_signal("hdmi_ddc_scl",
+ OMAP_PIN_INPUT_PULLUP);
+ omap_mux_init_signal("hdmi_ddc_sda",
+ OMAP_PIN_INPUT_PULLUP);
+}
+
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+ /* dispc2_data23 */
+ OMAP4_MUX(USBB2_ULPITLL_STP, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+ /* dispc2_data22 */
+ OMAP4_MUX(USBB2_ULPITLL_DIR, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+ /* dispc2_data21 */
+ OMAP4_MUX(USBB2_ULPITLL_NXT, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+ /* dispc2_data20 */
+ OMAP4_MUX(USBB2_ULPITLL_DAT0, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+ /* dispc2_data19 */
+ OMAP4_MUX(USBB2_ULPITLL_DAT1, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+ /* dispc2_data18 */
+ OMAP4_MUX(USBB2_ULPITLL_DAT2, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+ /* dispc2_data15 */
+ OMAP4_MUX(USBB2_ULPITLL_DAT3, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+ /* dispc2_data14 */
+ OMAP4_MUX(USBB2_ULPITLL_DAT4, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+ /* dispc2_data13 */
+ OMAP4_MUX(USBB2_ULPITLL_DAT5, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+ /* dispc2_data12 */
+ OMAP4_MUX(USBB2_ULPITLL_DAT6, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+ /* dispc2_data11 */
+ OMAP4_MUX(USBB2_ULPITLL_DAT7, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+ /* dispc2_data10 */
+ OMAP4_MUX(DPM_EMU3, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+ /* dispc2_data9 */
+ OMAP4_MUX(DPM_EMU4, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+ /* dispc2_data16 */
+ OMAP4_MUX(DPM_EMU5, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+ /* dispc2_data17 */
+ OMAP4_MUX(DPM_EMU6, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+ /* dispc2_hsync */
+ OMAP4_MUX(DPM_EMU7, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+ /* dispc2_pclk */
+ OMAP4_MUX(DPM_EMU8, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+ /* dispc2_vsync */
+ OMAP4_MUX(DPM_EMU9, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+ /* dispc2_de */
+ OMAP4_MUX(DPM_EMU10, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+ /* dispc2_data8 */
+ OMAP4_MUX(DPM_EMU11, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+ /* dispc2_data7 */
+ OMAP4_MUX(DPM_EMU12, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+ /* dispc2_data6 */
+ OMAP4_MUX(DPM_EMU13, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+ /* dispc2_data5 */
+ OMAP4_MUX(DPM_EMU14, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+ /* dispc2_data4 */
+ OMAP4_MUX(DPM_EMU15, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+ /* dispc2_data3 */
+ OMAP4_MUX(DPM_EMU16, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+ /* dispc2_data2 */
+ OMAP4_MUX(DPM_EMU17, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+ /* dispc2_data1 */
+ OMAP4_MUX(DPM_EMU18, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+ /* dispc2_data0 */
+ OMAP4_MUX(DPM_EMU19, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+
+static struct omap_device_pad serial2_pads[] __initdata = {
+ OMAP_MUX_STATIC("uart2_cts.uart2_cts",
+ OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+ OMAP_MUX_STATIC("uart2_rts.uart2_rts",
+ OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
+ OMAP_MUX_STATIC("uart2_rx.uart2_rx",
+ OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+ OMAP_MUX_STATIC("uart2_tx.uart2_tx",
+ OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
+};
+
+static struct omap_device_pad serial3_pads[] __initdata = {
+ OMAP_MUX_STATIC("uart3_cts_rctx.uart3_cts_rctx",
+ OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
+ OMAP_MUX_STATIC("uart3_rts_sd.uart3_rts_sd",
+ OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
+ OMAP_MUX_STATIC("uart3_rx_irrx.uart3_rx_irrx",
+ OMAP_PIN_INPUT | OMAP_MUX_MODE0),
+ OMAP_MUX_STATIC("uart3_tx_irtx.uart3_tx_irtx",
+ OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
+};
+
+static struct omap_device_pad serial4_pads[] __initdata = {
+ OMAP_MUX_STATIC("uart4_rx.uart4_rx",
+ OMAP_PIN_INPUT | OMAP_MUX_MODE0),
+ OMAP_MUX_STATIC("uart4_tx.uart4_tx",
+ OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
+};
+
+struct omap_board_data serial2_data __initdata = {
+ .id = 1,
+ .pads = serial2_pads,
+ .pads_cnt = ARRAY_SIZE(serial2_pads),
+};
+
+struct omap_board_data serial3_data __initdata = {
+ .id = 2,
+ .pads = serial3_pads,
+ .pads_cnt = ARRAY_SIZE(serial3_pads),
+};
+
+struct omap_board_data serial4_data __initdata = {
+ .id = 3,
+ .pads = serial4_pads,
+ .pads_cnt = ARRAY_SIZE(serial4_pads),
+};
+#else
+#define board_mux NULL
+#endif
+
+/* dummy data for UART1 */
+struct omap_board_data bdata;
+
+static int omap4_twl6030_hsmmc_late_init(struct device *dev)
+{
+ int ret = 0;
+ struct platform_device *pdev = container_of(dev,
+ struct platform_device, dev);
+ struct omap_mmc_platform_data *pdata = dev->platform_data;
+
+ if (!pdata) {
+ dev_err(dev, "%s: NULL platform data\n", __func__);
+ return -EINVAL;
+ }
+ /* Setting MMC1 Card detect Irq */
+ if (pdev->id == 0) {
+ ret = twl6030_mmc_card_detect_config();
+ if (ret)
+ dev_err(dev, "%s: Error card detect config(%d)\n",
+ __func__, ret);
+ else
+ pdata->slots[0].card_detect = twl6030_mmc_card_detect;
+ }
+ return ret;
+}
+
+static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
+{
+ struct omap_mmc_platform_data *pdata;
+
+ /* dev can be null if CONFIG_MMC_OMAP_HS is not set */
+ if (!dev) {
+ pr_err("Failed omap4_twl6030_hsmmc_set_late_init\n");
+ return;
+ }
+ pdata = dev->platform_data;
+
+ pdata->init = omap4_twl6030_hsmmc_late_init;
+}
+
+static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info
*controllers)
+{
+ struct omap2_hsmmc_info *c;
+
+ omap2_hsmmc_init(controllers);
+ for (c = controllers; c->mmc; c++)
+ omap4_twl6030_hsmmc_set_late_init(c->dev);
+
+ return 0;
+}
+
+static int __init omap4_panda_i2c_init(void)
+{
+ omap4_pmic_get_config(&board_config->twldata,
+ TWL_COMMON_PDATA_USB,
+ TWL_COMMON_REGULATOR_VDAC |
+ TWL_COMMON_REGULATOR_VAUX2 |
+ TWL_COMMON_REGULATOR_VAUX3 |
+ TWL_COMMON_REGULATOR_VMMC |
+ TWL_COMMON_REGULATOR_VPP |
+ TWL_COMMON_REGULATOR_VANA |
+ TWL_COMMON_REGULATOR_VCXIO |
+ TWL_COMMON_REGULATOR_VUSB |
+ TWL_COMMON_REGULATOR_CLK32KG);
+ omap4_pmic_init("twl6030", &board_config->twldata);
+ if (!board_config->i2c_2_board_speed)
+ omap_register_i2c_bus(2, board_config->i2c_2_board_speed,
+ board_config->i2c_2_board_info,
+ board_config->i2c_2_board_size);
+ if (!board_config->i2c_3_board_speed)
+ omap_register_i2c_bus(3, board_config->i2c_3_board_speed,
+ board_config->i2c_3_board_info,
+ board_config->i2c_3_board_size);
+ if (!board_config->i2c_4_board_speed)
+ omap_register_i2c_bus(4, board_config->i2c_4_board_speed,
+ board_config->i2c_4_board_info,
+ board_config->i2c_4_board_size);
+ return 0;
+}
+
+#ifdef CONFIG_OMAP_MUX
+static inline void board_serial_init(void)
+{
+ /* pass dummy data for UART1 */
+ bdata.flags = 0;
+ bdata.pads = NULL;
+ bdata.pads_cnt = 0;
+ bdata.id = 0;
+ if (board_config->serial1)
+ omap_serial_init_port(board_config->serial1);
+ if (board_config->serial2)
+ omap_serial_init_port(board_config->serial2);
+ if (board_config->serial3)
+ omap_serial_init_port(board_config->serial3);
+ if (board_config->serial4)
+ omap_serial_init_port(board_config->serial4);
+}
+#else
+
+static inline void board_serial_init(void)
+{
+ omap_serial_init();
+}
+#endif
+
+static struct platform_device leds_gpio = {
+ .name = "leds-gpio",
+ .id = -1,
+};
+
+static struct platform_device *common_devices[] __initdata = {
+ &leds_gpio,
+};
+
+void __init omap4_panda_init_early(void)
+{
+ omap2_init_common_infrastructure();
+ omap2_init_common_devices(NULL, NULL);
+}
+
+const struct usbhs_omap_board_data usbhs_bdata __initconst = {
+ .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+ .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
+ .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
+ .phy_reset = false,
+ .reset_gpio_port[0] = -EINVAL,
+ .reset_gpio_port[1] = -EINVAL,
+ .reset_gpio_port[2] = -EINVAL
+};
+
+static void __init omap4_ehci_init(void)
+{
+ int ret;
+ struct clk *phy_ref_clk;
+
+ /* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */
+ phy_ref_clk = clk_get(NULL, "auxclk3_ck");
+ if (IS_ERR(phy_ref_clk)) {
+ pr_err("Cannot request auxclk3\n");
+ return;
+ }
+ clk_set_rate(phy_ref_clk, 19200000);
+ clk_enable(phy_ref_clk);
+
+ /* disable the power to the usb hub prior to init and reset phy+hub */
+ if (board_config->hup_power_gpio != -EINVAL) {
+ ret = gpio_request_one(board_config->hup_power_gpio,
+ GPIOF_OUT_INIT_LOW, "hub_power");
+ if (ret) {
+ pr_err("Unable to initialize EHCI power\n");
+ return;
+ }
+ gpio_export(board_config->hup_power_gpio, 0);
+ }
+
+ if (board_config->hup_nreset_gpio != -EINVAL) {
+ ret = gpio_request_one(board_config->hup_nreset_gpio,
+ GPIOF_OUT_INIT_LOW, "hub_nreset");
+ if (ret) {
+ pr_err("Unable to initialize EHCI reset\n");
+ return;
+ }
+ gpio_export(board_config->hup_nreset_gpio, 0);
+ gpio_set_value(board_config->hup_nreset_gpio, 1);
+ }
+
+ usbhs_init(&usbhs_bdata);
+
+ /* enable power to hub */
+ if (board_config->hup_power_gpio != -EINVAL)
+ gpio_set_value(board_config->hup_power_gpio, 1);
+}
+
+struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_UTMI,
+ .mode = MUSB_OTG,
+ .power = 100,
+};
+
+void __init omap4_common_preinit(void)
+{
+ int package = OMAP_PACKAGE_CBS;
+
+ if (omap_rev() == OMAP4430_REV_ES1_0)
+ package = OMAP_PACKAGE_CBL;
+ omap4_mux_init(board_mux, NULL, package);
+
+}
+
+void __init omap4_common_init(struct panda_board_data *config)
+{
+ board_config = config;
+
+ leds_gpio.dev.platform_data = &board_config->gpio_led_info;
+
+ platform_add_devices(common_devices, ARRAY_SIZE(common_devices));
+ omap4_twl6030_hsmmc_init(board_config->mmc);
+ omap4_panda_i2c_init();
+ board_serial_init();
+ omap4_ehci_init();
+ usb_musb_init(&musb_board_data);
+}
diff --git a/arch/arm/mach-omap2/board-omap4panda-common.h
b/arch/arm/mach-omap2/board-omap4panda-common.h
new file mode 100644
index 0000000..1c6a723
--- /dev/null
+++ b/arch/arm/mach-omap2/board-omap4panda-common.h
@@ -0,0 +1,39 @@
+#ifndef __BOAR_OAMP4PANDA_COMMON_H__
+#define __BOAR_OAMP4PANDA_COMMON_H__
+
+struct panda_board_data {
+ int hup_power_gpio;
+ int hup_nreset_gpio;
+ struct gpio_led_platform_data gpio_led_info;
+ struct omap2_hsmmc_info *mmc;
+ struct twl4030_platform_data twldata;
+ struct i2c_board_info *i2c_2_board_info;
+ int i2c_2_board_size;
+ int i2c_2_board_speed;
+ struct i2c_board_info *i2c_3_board_info;
+ int i2c_3_board_size;
+ int i2c_3_board_speed;
+ struct i2c_board_info *i2c_4_board_info;
+ int i2c_4_board_size;
+ int i2c_4_board_speed;
+ struct omap_board_data *serial1;
+ struct omap_board_data *serial2;
+ struct omap_board_data *serial3;
+ struct omap_board_data *serial4;
+
+};
+
+extern struct omap_board_data bdata;
+extern struct omap_board_data serial2_data;
+extern struct omap_board_data serial3_data;
+extern struct omap_board_data serial4_data;
+extern const struct usbhs_omap_board_data usbhs_bdata;
+extern struct omap_musb_board_data musb_board_datai;
+
+void __init omap4_panda_init_early(void);
+void omap4_common_hdmi_mux_init(void);
+
+void __init omap4_common_preinit(void);
+void __init omap4_common_init(struct panda_board_data *config);
+
+#endif /* __BOAR_OAMP4PANDA_COMMON_H__ */
diff --git a/arch/arm/mach-omap2/board-omap4panda.c
b/arch/arm/mach-omap2/board-omap4panda.c
index 9aaa960..a596027 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -46,24 +46,13 @@
#include "control.h"
#include "mux.h"
#include "common-board-devices.h"
+#include "board-omap4panda-common.h"
-#define GPIO_HUB_POWER 1
-#define GPIO_HUB_NRESET 62
#define GPIO_WIFI_PMENA 43
#define GPIO_WIFI_IRQ 53
#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */
#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
-/* wl127x BT, FM, GPS connectivity chip */
-static int wl1271_gpios[] = {46, -1, -1};
-static struct platform_device wl1271_device = {
- .name = "kim",
- .id = -1,
- .dev = {
- .platform_data = &wl1271_gpios,
- },
-};
-
static struct gpio_led gpio_leds[] = {
{
.name = "pandaboard::status1",
@@ -77,84 +66,17 @@ static struct gpio_led gpio_leds[] = {
},
};
-static struct gpio_led_platform_data gpio_led_info = {
- .leds = gpio_leds,
- .num_leds = ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds_gpio = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &gpio_led_info,
+/*
+ * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM
+ * is connected as I2C slave device, and can be accessed at address 0x50
+ */
+static struct i2c_board_info __initdata panda_i2c_eeprom[] = {
+ {
+ I2C_BOARD_INFO("eeprom", 0x50),
},
};
-static struct platform_device *panda_devices[] __initdata = {
- &leds_gpio,
- &wl1271_device,
-};
-
-static void __init omap4_panda_init_early(void)
-{
- omap2_init_common_infrastructure();
- omap2_init_common_devices(NULL, NULL);
-}
-
-static const struct usbhs_omap_board_data usbhs_bdata __initconst = {
- .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
- .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
- .phy_reset = false,
- .reset_gpio_port[0] = -EINVAL,
- .reset_gpio_port[1] = -EINVAL,
- .reset_gpio_port[2] = -EINVAL
-};
-
-static struct gpio panda_ehci_gpios[] __initdata = {
- { GPIO_HUB_POWER, GPIOF_OUT_INIT_LOW, "hub_power" },
- { GPIO_HUB_NRESET, GPIOF_OUT_INIT_LOW, "hub_nreset" },
-};
-
-static void __init omap4_ehci_init(void)
-{
- int ret;
- struct clk *phy_ref_clk;
-
- /* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */
- phy_ref_clk = clk_get(NULL, "auxclk3_ck");
- if (IS_ERR(phy_ref_clk)) {
- pr_err("Cannot request auxclk3\n");
- return;
- }
- clk_set_rate(phy_ref_clk, 19200000);
- clk_enable(phy_ref_clk);
-
- /* disable the power to the usb hub prior to init and reset phy+hub */
- ret = gpio_request_array(panda_ehci_gpios,
- ARRAY_SIZE(panda_ehci_gpios));
- if (ret) {
- pr_err("Unable to initialize EHCI power/reset\n");
- return;
- }
-
- gpio_export(GPIO_HUB_POWER, 0);
- gpio_export(GPIO_HUB_NRESET, 0);
- gpio_set_value(GPIO_HUB_NRESET, 1);
-
- usbhs_init(&usbhs_bdata);
-
- /* enable power to hub */
- gpio_set_value(GPIO_HUB_POWER, 1);
-}
-
-static struct omap_musb_board_data musb_board_data = {
- .interface_type = MUSB_INTERFACE_UTMI,
- .mode = MUSB_OTG,
- .power = 100,
-};
-
-static struct omap2_hsmmc_info mmc[] = {
+static struct omap2_hsmmc_info omap4_panda_mmc[] = {
{
.mmc = 1,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
@@ -173,6 +95,48 @@ static struct omap2_hsmmc_info mmc[] = {
{} /* Terminator */
};
+/*
+ * Board-specific configuration
+ */
+static struct panda_board_data omap4_panda_config = {
+ .hup_power_gpio = 1,
+ .hup_nreset_gpio = 62,
+ .gpio_led_info.leds = gpio_leds,
+ .gpio_led_info.num_leds = ARRAY_SIZE(gpio_leds),
+ .mmc = omap4_panda_mmc,
+ .i2c_2_board_info = NULL,
+ .i2c_2_board_size = 0,
+ .i2c_2_board_speed = 400,
+ .i2c_3_board_info = panda_i2c_eeprom,
+ .i2c_3_board_size = ARRAY_SIZE(panda_i2c_eeprom),
+ /*
+ * Bus 3 is attached to the DVI port where devices like the pico DLP
+ * projector don't work reliably with 400kHz
+ */
+ .i2c_3_board_speed = 100,
+ .i2c_4_board_info = NULL,
+ .i2c_4_board_size = 0,
+ .i2c_4_board_speed = 400,
+ .serial1 = &bdata,
+ .serial2 = &serial2_data,
+ .serial3 = &serial3_data,
+ .serial4 = &serial4_data,
+};
+
+/* wl127x BT, FM, GPS connectivity chip */
+static int wl1271_gpios[] = {46, -1, -1};
+static struct platform_device wl1271_device = {
+ .name = "kim",
+ .id = -1,
+ .dev = {
+ .platform_data = &wl1271_gpios,
+ },
+};
+
+static struct platform_device *panda_devices[] __initdata = {
+ &wl1271_device,
+};
+
static struct regulator_consumer_supply omap4_panda_vmmc5_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.4"),
};
@@ -209,237 +173,6 @@ struct wl12xx_platform_data omap_panda_wlan_data
__initdata = {
.board_ref_clock = 2,
};
-static int omap4_twl6030_hsmmc_late_init(struct device *dev)
-{
- int ret = 0;
- struct platform_device *pdev = container_of(dev,
- struct platform_device, dev);
- struct omap_mmc_platform_data *pdata = dev->platform_data;
-
- if (!pdata) {
- dev_err(dev, "%s: NULL platform data\n", __func__);
- return -EINVAL;
- }
- /* Setting MMC1 Card detect Irq */
- if (pdev->id == 0) {
- ret = twl6030_mmc_card_detect_config();
- if (ret)
- dev_err(dev, "%s: Error card detect config(%d)\n",
- __func__, ret);
- else
- pdata->slots[0].card_detect = twl6030_mmc_card_detect;
- }
- return ret;
-}
-
-static __init void omap4_twl6030_hsmmc_set_late_init(struct device *dev)
-{
- struct omap_mmc_platform_data *pdata;
-
- /* dev can be null if CONFIG_MMC_OMAP_HS is not set */
- if (!dev) {
- pr_err("Failed omap4_twl6030_hsmmc_set_late_init\n");
- return;
- }
- pdata = dev->platform_data;
-
- pdata->init = omap4_twl6030_hsmmc_late_init;
-}
-
-static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info
*controllers)
-{
- struct omap2_hsmmc_info *c;
-
- omap2_hsmmc_init(controllers);
- for (c = controllers; c->mmc; c++)
- omap4_twl6030_hsmmc_set_late_init(c->dev);
-
- return 0;
-}
-
-/* Panda board uses the common PMIC configuration */
-static struct twl4030_platform_data omap4_panda_twldata;
-
-/*
- * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM
- * is connected as I2C slave device, and can be accessed at address 0x50
- */
-static struct i2c_board_info __initdata panda_i2c_eeprom[] = {
- {
- I2C_BOARD_INFO("eeprom", 0x50),
- },
-};
-
-static int __init omap4_panda_i2c_init(void)
-{
- omap4_pmic_get_config(&omap4_panda_twldata, TWL_COMMON_PDATA_USB,
- TWL_COMMON_REGULATOR_VDAC |
- TWL_COMMON_REGULATOR_VAUX2 |
- TWL_COMMON_REGULATOR_VAUX3 |
- TWL_COMMON_REGULATOR_VMMC |
- TWL_COMMON_REGULATOR_VPP |
- TWL_COMMON_REGULATOR_VANA |
- TWL_COMMON_REGULATOR_VCXIO |
- TWL_COMMON_REGULATOR_VUSB |
- TWL_COMMON_REGULATOR_CLK32KG);
- omap4_pmic_init("twl6030", &omap4_panda_twldata);
- omap_register_i2c_bus(2, 400, NULL, 0);
- /*
- * Bus 3 is attached to the DVI port where devices like the pico DLP
- * projector don't work reliably with 400kHz
- */
- omap_register_i2c_bus(3, 100, panda_i2c_eeprom,
- ARRAY_SIZE(panda_i2c_eeprom));
- omap_register_i2c_bus(4, 400, NULL, 0);
- return 0;
-}
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
- /* WLAN IRQ - GPIO 53 */
- OMAP4_MUX(GPMC_NCS3, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
- /* WLAN POWER ENABLE - GPIO 43 */
- OMAP4_MUX(GPMC_A19, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT),
- /* WLAN SDIO: MMC5 CMD */
- OMAP4_MUX(SDMMC5_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
- /* WLAN SDIO: MMC5 CLK */
- OMAP4_MUX(SDMMC5_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
- /* WLAN SDIO: MMC5 DAT[0-3] */
- OMAP4_MUX(SDMMC5_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
- OMAP4_MUX(SDMMC5_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
- OMAP4_MUX(SDMMC5_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
- OMAP4_MUX(SDMMC5_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
- /* gpio 0 - TFP410 PD */
- OMAP4_MUX(KPD_COL1, OMAP_PIN_OUTPUT | OMAP_MUX_MODE3),
- /* dispc2_data23 */
- OMAP4_MUX(USBB2_ULPITLL_STP, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data22 */
- OMAP4_MUX(USBB2_ULPITLL_DIR, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data21 */
- OMAP4_MUX(USBB2_ULPITLL_NXT, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data20 */
- OMAP4_MUX(USBB2_ULPITLL_DAT0, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data19 */
- OMAP4_MUX(USBB2_ULPITLL_DAT1, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data18 */
- OMAP4_MUX(USBB2_ULPITLL_DAT2, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data15 */
- OMAP4_MUX(USBB2_ULPITLL_DAT3, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data14 */
- OMAP4_MUX(USBB2_ULPITLL_DAT4, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data13 */
- OMAP4_MUX(USBB2_ULPITLL_DAT5, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data12 */
- OMAP4_MUX(USBB2_ULPITLL_DAT6, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data11 */
- OMAP4_MUX(USBB2_ULPITLL_DAT7, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data10 */
- OMAP4_MUX(DPM_EMU3, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data9 */
- OMAP4_MUX(DPM_EMU4, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data16 */
- OMAP4_MUX(DPM_EMU5, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data17 */
- OMAP4_MUX(DPM_EMU6, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_hsync */
- OMAP4_MUX(DPM_EMU7, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_pclk */
- OMAP4_MUX(DPM_EMU8, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_vsync */
- OMAP4_MUX(DPM_EMU9, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_de */
- OMAP4_MUX(DPM_EMU10, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data8 */
- OMAP4_MUX(DPM_EMU11, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data7 */
- OMAP4_MUX(DPM_EMU12, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data6 */
- OMAP4_MUX(DPM_EMU13, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data5 */
- OMAP4_MUX(DPM_EMU14, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data4 */
- OMAP4_MUX(DPM_EMU15, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data3 */
- OMAP4_MUX(DPM_EMU16, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data2 */
- OMAP4_MUX(DPM_EMU17, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data1 */
- OMAP4_MUX(DPM_EMU18, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- /* dispc2_data0 */
- OMAP4_MUX(DPM_EMU19, OMAP_PIN_OUTPUT | OMAP_MUX_MODE5),
- { .reg_offset = OMAP_MUX_TERMINATOR },
-};
-
-static struct omap_device_pad serial2_pads[] __initdata = {
- OMAP_MUX_STATIC("uart2_cts.uart2_cts",
- OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
- OMAP_MUX_STATIC("uart2_rts.uart2_rts",
- OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
- OMAP_MUX_STATIC("uart2_rx.uart2_rx",
- OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
- OMAP_MUX_STATIC("uart2_tx.uart2_tx",
- OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
-};
-
-static struct omap_device_pad serial3_pads[] __initdata = {
- OMAP_MUX_STATIC("uart3_cts_rctx.uart3_cts_rctx",
- OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0),
- OMAP_MUX_STATIC("uart3_rts_sd.uart3_rts_sd",
- OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
- OMAP_MUX_STATIC("uart3_rx_irrx.uart3_rx_irrx",
- OMAP_PIN_INPUT | OMAP_MUX_MODE0),
- OMAP_MUX_STATIC("uart3_tx_irtx.uart3_tx_irtx",
- OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
-};
-
-static struct omap_device_pad serial4_pads[] __initdata = {
- OMAP_MUX_STATIC("uart4_rx.uart4_rx",
- OMAP_PIN_INPUT | OMAP_MUX_MODE0),
- OMAP_MUX_STATIC("uart4_tx.uart4_tx",
- OMAP_PIN_OUTPUT | OMAP_MUX_MODE0),
-};
-
-static struct omap_board_data serial2_data __initdata = {
- .id = 1,
- .pads = serial2_pads,
- .pads_cnt = ARRAY_SIZE(serial2_pads),
-};
-
-static struct omap_board_data serial3_data __initdata = {
- .id = 2,
- .pads = serial3_pads,
- .pads_cnt = ARRAY_SIZE(serial3_pads),
-};
-
-static struct omap_board_data serial4_data __initdata = {
- .id = 3,
- .pads = serial4_pads,
- .pads_cnt = ARRAY_SIZE(serial4_pads),
-};
-
-static inline void board_serial_init(void)
-{
- struct omap_board_data bdata;
- bdata.flags = 0;
- bdata.pads = NULL;
- bdata.pads_cnt = 0;
- bdata.id = 0;
- /* pass dummy data for UART1 */
- omap_serial_init_port(&bdata);
-
- omap_serial_init_port(&serial2_data);
- omap_serial_init_port(&serial3_data);
- omap_serial_init_port(&serial4_data);
-}
-#else
-#define board_mux NULL
-
-static inline void board_serial_init(void)
-{
- omap_serial_init();
-}
-#endif
-
/* Display DVI */
#define PANDA_DVI_TFP410_POWER_DOWN_GPIO 0
@@ -484,21 +217,6 @@ int __init omap4_panda_dvi_init(void)
return r;
}
-
-static void omap4_panda_hdmi_mux_init(void)
-{
- /* PAD0_HDMI_HPD_PAD1_HDMI_CEC */
- omap_mux_init_signal("hdmi_hpd",
- OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_signal("hdmi_cec",
- OMAP_PIN_INPUT_PULLUP);
- /* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */
- omap_mux_init_signal("hdmi_ddc_scl",
- OMAP_PIN_INPUT_PULLUP);
- omap_mux_init_signal("hdmi_ddc_sda",
- OMAP_PIN_INPUT_PULLUP);
-}
-
static struct gpio panda_hdmi_gpios[] = {
{ HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" },
{ HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" },
@@ -550,28 +268,41 @@ void omap4_panda_display_init(void)
if (r)
pr_err("error initializing panda DVI\n");
- omap4_panda_hdmi_mux_init();
+ omap4_common_hdmi_mux_init();
omap_display_init(&omap4_panda_dss_data);
}
+static struct omap_board_mux omap4_panda_mux[] = {
+#ifdef CONFIG_OMAP_MUX
+ /* WLAN IRQ - GPIO 53 */
+ OMAP4_MUX(GPMC_NCS3, OMAP_MUX_MODE3 | OMAP_PIN_INPUT),
+ /* WLAN POWER ENABLE - GPIO 43 */
+ OMAP4_MUX(GPMC_A19, OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT),
+ /* WLAN SDIO: MMC5 CMD */
+ OMAP4_MUX(SDMMC5_CMD, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+ /* WLAN SDIO: MMC5 CLK */
+ OMAP4_MUX(SDMMC5_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+ /* WLAN SDIO: MMC5 DAT[0-3] */
+ OMAP4_MUX(SDMMC5_DAT0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+ OMAP4_MUX(SDMMC5_DAT1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+ OMAP4_MUX(SDMMC5_DAT2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+ OMAP4_MUX(SDMMC5_DAT3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP),
+ /* gpio 0 - TFP410 PD */
+ OMAP4_MUX(KPD_COL1, OMAP_PIN_OUTPUT | OMAP_MUX_MODE3),
+#endif
+ { .reg_offset = OMAP_MUX_TERMINATOR },
+};
+
static void __init omap4_panda_init(void)
{
- int package = OMAP_PACKAGE_CBS;
-
- if (omap_rev() == OMAP4430_REV_ES1_0)
- package = OMAP_PACKAGE_CBL;
- omap4_mux_init(board_mux, NULL, package);
-
+ omap4_common_preinit();
+ omap_mux_write_array(omap_mux_get("core"), omap4_panda_mux);
+ omap4_common_init(&omap4_panda_config);
if (wl12xx_set_platform_data(&omap_panda_wlan_data))
pr_err("error setting wl12xx data\n");
- omap4_panda_i2c_init();
platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
platform_device_register(&omap_vwlan_device);
- board_serial_init();
- omap4_twl6030_hsmmc_init(mmc);
- omap4_ehci_init();
- usb_musb_init(&musb_board_data);
omap4_panda_display_init();
}
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
