On Thu, Aug 18, 2011 at 5:07 PM, Felipe Balbi <ba...@ti.com> wrote: > Hi, > > On Thu, Aug 18, 2011 at 04:22:15PM +0530, Keerthy wrote: >> On chip temperature sensor driver. The driver monitors the temperature of >> the MPU subsystem of the OMAP4. It sends notifications to the user space if >> the temperature crosses user defined thresholds via kobject_uevent interface. >> The user is allowed to configure the temperature thresholds vis sysfs nodes >> exposed using hwmon interface. >> >> Signed-off-by: Keerthy <j-keer...@ti.com> >> Cc: Jean Delvare <kh...@linux-fr.org> >> Cc: Guenter Roeck <guenter.ro...@ericsson.com> >> Cc: lm-sens...@lm-sensors.org >> --- >> Documentation/hwmon/omap_temp_sensor | 27 + >> drivers/hwmon/Kconfig | 11 + >> drivers/hwmon/Makefile | 1 + >> drivers/hwmon/omap_temp_sensor.c | 918 >> ++++++++++++++++++++++++++++++++++ >> 4 files changed, 957 insertions(+), 0 deletions(-) >> create mode 100644 Documentation/hwmon/omap_temp_sensor >> create mode 100644 drivers/hwmon/omap_temp_sensor.c >> >> diff --git a/Documentation/hwmon/omap_temp_sensor >> b/Documentation/hwmon/omap_temp_sensor >> new file mode 100644 >> index 0000000..e01a6d6 >> --- /dev/null >> +++ b/Documentation/hwmon/omap_temp_sensor >> @@ -0,0 +1,27 @@ >> +Kernel driver omap_temp_sensor >> +============================== >> + >> +Supported chips: >> + * Texas Instruments OMAP4460 >> + Prefix: 'omap_temp_sensor' >> + Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp102.html >> + >> +Author: >> + J Keerthy <j-keer...@ti.com> >> + >> +Description >> +----------- >> + >> +The Texas Instruments OMAP4 family of chips have a bandgap temperature >> sensor. >> +The temperature sensor feature is used to convert the temperature of the >> device >> +into a decimal value coded on 10 bits. An internal ADC is used for >> conversion. >> +The recommended operating temperatures must be in the range -40 degree >> Celsius >> +to 123 degree celsius for standard conversion. >> +The thresholds are programmable and upon crossing the thresholds an >> interrupt >> +is generated. The OMAP temperature sensor has a programmable update rate in >> +milli seconds. >> +(Currently the driver programs a default of 2000 milli seconds). >> + >> +The driver provides the common sysfs-interface for temperatures (see >> +Documentation/hwmon/sysfs-interface under Temperatures). >> + >> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig >> index 5f888f7..9c9cd8b 100644 >> --- a/drivers/hwmon/Kconfig >> +++ b/drivers/hwmon/Kconfig >> @@ -323,6 +323,17 @@ config SENSORS_F71805F >> This driver can also be built as a module. If so, the module >> will be called f71805f. >> >> +config SENSORS_OMAP_BANDGAP_TEMP_SENSOR >> + bool "OMAP on-die temperature sensor hwmon driver" >> + depends on HWMON && ARCH_OMAP && OMAP_TEMP_SENSOR >> + help >> + If you say yes here you get support for hardware >> + monitoring features of the OMAP on die temperature >> + sensor. >> + >> + Continuous conversion programmable delay >> + mode is used for temperature conversion. >> + >> config SENSORS_F71882FG >> tristate "Fintek F71882FG and compatibles" >> help >> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile >> index 28061cf..d0f89f5 100644 >> --- a/drivers/hwmon/Makefile >> +++ b/drivers/hwmon/Makefile >> @@ -91,6 +91,7 @@ obj-$(CONFIG_SENSORS_MAX6639) += max6639.o >> obj-$(CONFIG_SENSORS_MAX6642) += max6642.o >> obj-$(CONFIG_SENSORS_MAX6650) += max6650.o >> obj-$(CONFIG_SENSORS_MC13783_ADC)+= mc13783-adc.o >> +obj-$(CONFIG_SENSORS_OMAP_BANDGAP_TEMP_SENSOR) += omap_temp_sensor.o >> obj-$(CONFIG_SENSORS_PC87360) += pc87360.o >> obj-$(CONFIG_SENSORS_PC87427) += pc87427.o >> obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o >> diff --git a/drivers/hwmon/omap_temp_sensor.c >> b/drivers/hwmon/omap_temp_sensor.c >> new file mode 100644 >> index 0000000..586a361 >> --- /dev/null >> +++ b/drivers/hwmon/omap_temp_sensor.c >> @@ -0,0 +1,918 @@ >> +/* >> + * OMAP4 Temperature sensor driver file >> + * >> + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ >> + * Author: J Keerthy <j-keer...@ti.com> >> + * Author: Moiz Sonasath <m-sonas...@ti.com> >> + * >> + * This program is free software; you can redistribute it and/or >> + * modify it under the terms of the GNU General Public License >> + * version 2 as published by the Free Software Foundation. >> + * >> + * This program is distributed in the hope that it will be useful, but >> + * WITHOUT ANY WARRANTY; without even the implied warranty of >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU >> + * General Public License for more details. >> + * >> + * You should have received a copy of the GNU General Public License >> + * along with this program; if not, write to the Free Software >> + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA >> + * 02110-1301 USA >> + * >> + */ >> + >> +#include <linux/interrupt.h> >> +#include <linux/clk.h> >> +#include <linux/io.h> >> +#include <linux/slab.h> >> +#include <linux/init.h> >> +#include <plat/omap_device.h> >> +#include <linux/kernel.h> >> +#include <linux/device.h> >> +#include <linux/jiffies.h> >> +#include <linux/hwmon.h> >> +#include <linux/hwmon-sysfs.h> >> +#include <linux/stddef.h> >> +#include <linux/sysfs.h> >> +#include <linux/err.h> >> +#include <linux/types.h> >> +#include <linux/mutex.h> >> +#include <linux/pm_runtime.h> >> +#include <linux/delay.h> >> +#include <plat/temperature_sensor.h> >> + >> +#define TSHUT_THRESHOLD_HOT 122000 /* 122 deg C */ >> +#define TSHUT_THRESHOLD_COLD 100000 /* 100 deg C */ >> +#define BGAP_THRESHOLD_T_HOT 73000 /* 73 deg C */ >> +#define BGAP_THRESHOLD_T_COLD 71000 /* 71 deg C */ >> +#define OMAP_ADC_START_VALUE 530 >> +#define OMAP_ADC_END_VALUE 923 >> + >> +/* >> + * omap_temp_sensor structure >> + * @hwmon_dev - device pointer >> + * @clock - Clock pointer >> + * @registers - Pointer to structure with register offsets and bitfields >> + * @sensor_mutex - Mutex for sysfs, irq and PM >> + * @irq - MPU Irq number for thermal alert >> + * @phy_base - Physical base of the temp I/O >> + * @clk_rate - Holds current clock rate >> + * @temp_sensor_ctrl - temp sensor control register value >> + * @bg_ctrl - bandgap ctrl register value >> + * @bg_counter - bandgap counter value >> + * @bg_threshold - bandgap threshold register value >> + * @temp_sensor_tshut_threshold - bandgap tshut register value >> + * @is_efuse_valid - Flag to determine if efuse is valid or not >> + * @clk_on - Manages the current clock state >> + */ >> +struct omap_temp_sensor { >> + struct device *hwmon_dev; >> + struct clk *clock; >> + struct omap_temp_sensor_registers *registers; >> + struct mutex sensor_mutex; /* Mutex for sysfs, irq and PM */ >> + unsigned int irq; >> + void __iomem *phy_base; >> + u32 clk_rate; >> + u32 temp_sensor_ctrl; >> + u32 bg_ctrl; >> + u32 bg_counter; >> + u32 bg_threshold; >> + u32 temp_sensor_tshut_threshold; >> + bool is_efuse_valid; >> + bool clk_on; >> +}; >> + >> +/* >> + * Temperature values in milli degree celsius >> + * ADC code values from 530 to 923 >> + */ >> +static int adc_to_temp[] = { >> + -40000, -40000, -40000, -40000, -39800, -39400, -39000, -38600, -38200, >> + -37800, -37300, -36800, -36400, -36000, -35600, -35200, -34800, >> + -34300, -33800, -33400, -33000, -32600, -32200, -31800, -31300, >> + -30800, -30400, -30000, -29600, -29200, -28700, -28200, -27800, >> + -27400, -27000, -26600, -26200, -25700, -25200, -24800, -24400, >> + -24000, -23600, -23200, -22700, -22200, -21800, -21400, -21000, >> + -20600, -20200, -19700, -19200, -18800, -18400, -18000, -17600, >> + -17200, -16700, -16200, -15800, -15400, -15000, -14600, -14200, >> + -13700, -13200, -12800, -12400, -12000, -11600, -11200, -10700, >> + -10200, -9800, -9400, -9000, -8600, -8200, -7700, -7200, -6800, >> + -6400, -6000, -5600, -5200, -4800, -4300, -3800, -3400, -3000, >> + -2600, -2200, -1800, -1300, -800, -400, 0, 400, 800, 1200, 1600, >> + 2100, 2600, 3000, 3400, 3800, 4200, 4600, 5100, 5600, 6000, 6400, >> + 6800, 7200, 7600, 8000, 8500, 9000, 9400, 9800, 10200, 10600, 11000, >> + 11400, 11900, 12400, 12800, 13200, 13600, 14000, 14400, 14800, >> + 15300, 15800, 16200, 16600, 17000, 17400, 17800, 18200, 18700, >> + 19200, 19600, 20000, 20400, 20800, 21200, 21600, 22100, 22600, >> + 23000, 23400, 23800, 24200, 24600, 25000, 25400, 25900, 26400, >> + 26800, 27200, 27600, 28000, 28400, 28800, 29300, 29800, 30200, >> + 30600, 31000, 31400, 31800, 32200, 32600, 33100, 33600, 34000, >> + 34400, 34800, 35200, 35600, 36000, 36400, 36800, 37300, 37800, >> + 38200, 38600, 39000, 39400, 39800, 40200, 40600, 41100, 41600, >> + 42000, 42400, 42800, 43200, 43600, 44000, 44400, 44800, 45300, >> + 45800, 46200, 46600, 47000, 47400, 47800, 48200, 48600, 49000, >> + 49500, 50000, 50400, 50800, 51200, 51600, 52000, 52400, 52800, >> + 53200, 53700, 54200, 54600, 55000, 55400, 55800, 56200, 56600, >> + 57000, 57400, 57800, 58200, 58700, 59200, 59600, 60000, 60400, >> + 60800, 61200, 61600, 62000, 62400, 62800, 63300, 63800, 64200, >> + 64600, 65000, 65400, 65800, 66200, 66600, 67000, 67400, 67800, >> + 68200, 68700, 69200, 69600, 70000, 70400, 70800, 71200, 71600, >> + 72000, 72400, 72800, 73200, 73600, 74100, 74600, 75000, 75400, >> + 75800, 76200, 76600, 77000, 77400, 77800, 78200, 78600, 79000, >> + 79400, 79800, 80300, 80800, 81200, 81600, 82000, 82400, 82800, >> + 83200, 83600, 84000, 84400, 84800, 85200, 85600, 86000, 86400, >> + 86800, 87300, 87800, 88200, 88600, 89000, 89400, 89800, 90200, >> + 90600, 91000, 91400, 91800, 92200, 92600, 93000, 93400, 93800, >> + 94200, 94600, 95000, 95500, 96000, 96400, 96800, 97200, 97600, >> + 98000, 98400, 98800, 99200, 99600, 100000, 100400, 100800, 101200, >> + 101600, 102000, 102400, 102800, 103200, 103600, 104000, 104400, >> + 104800, 105200, 105600, 106100, 106600, 107000, 107400, 107800, >> + 108200, 108600, 109000, 109400, 109800, 110200, 110600, 111000, >> + 111400, 111800, 112200, 112600, 113000, 113400, 113800, 114200, >> + 114600, 115000, 115400, 115800, 116200, 116600, 117000, 117400, >> + 117800, 118200, 118600, 119000, 119400, 119800, 120200, 120600, >> + 121000, 121400, 121800, 122200, 122600, 123000 >> +}; >> + >> +static unsigned long omap_temp_sensor_readl(struct omap_temp_sensor >> + *temp_sensor, u32 reg) >> +{ >> + return __raw_readl(temp_sensor->phy_base + reg); >> +} >> + >> +static void omap_temp_sensor_writel(struct omap_temp_sensor *temp_sensor, >> + u32 val, u32 reg) >> +{ >> + __raw_writel(val, (temp_sensor->phy_base + reg)); >> +} >> + >> +static int adc_to_temp_conversion(int adc_val) >> +{ >> + return adc_to_temp[adc_val - OMAP_ADC_START_VALUE]; >> +} >> + >> +static int temp_to_adc_conversion(long temp) >> +{ >> + int i; >> + >> + for (i = 0; i <= OMAP_ADC_END_VALUE - OMAP_ADC_START_VALUE; i++) >> + if (temp < adc_to_temp[i]) >> + return OMAP_ADC_START_VALUE + i - 1; >> + >> + return -EINVAL; >> +} >> + >> +static void omap_configure_temp_sensor_thresholds(struct omap_temp_sensor >> + *temp_sensor) >> +{ >> + u32 temp, t_hot, t_cold, tshut_hot, tshut_cold; >> + >> + t_hot = temp_to_adc_conversion(BGAP_THRESHOLD_T_HOT); >> + t_cold = temp_to_adc_conversion(BGAP_THRESHOLD_T_COLD); >> + >> + /* Configure the TALERT thresholds */ >> + temp = omap_temp_sensor_readl(temp_sensor, >> + temp_sensor->registers->bgap_threshold); >> + temp |= (t_hot << __ffs(temp_sensor->registers->threshold_thot_mask)) | >> + (t_cold << >> __ffs(temp_sensor->registers->threshold_tcold_mask)); >> + omap_temp_sensor_writel(temp_sensor, temp, >> + temp_sensor->registers->bgap_threshold); >> + >> + tshut_hot = temp_to_adc_conversion(TSHUT_THRESHOLD_HOT); >> + tshut_cold = temp_to_adc_conversion(TSHUT_THRESHOLD_COLD); >> + >> + /* Configure the TSHUT thresholds */ >> + temp = omap_temp_sensor_readl(temp_sensor, >> + temp_sensor->registers->thsut_threshold); >> + temp |= (tshut_hot << __ffs(temp_sensor->registers->tshut_hot_mask)) >> + | (tshut_cold << __ffs(temp_sensor->registers->tshut_hot_mask)); >> + omap_temp_sensor_writel(temp_sensor, temp, >> + temp_sensor->registers->thsut_threshold); >> +} >> + >> +static void omap_configure_temp_sensor_counter(struct omap_temp_sensor >> + *temp_sensor, u32 counter) >> +{ >> + u32 val; >> + >> + val = omap_temp_sensor_readl(temp_sensor, >> + temp_sensor->registers->bgap_counter); >> + val &= ~(temp_sensor->registers->counter_mask); >> + val |= (counter << __ffs(temp_sensor->registers->counter_mask)); >> + omap_temp_sensor_writel(temp_sensor, val, >> + temp_sensor->registers->bgap_counter); >> +} >> + >> +static void omap_enable_continuous_mode(struct omap_temp_sensor >> *temp_sensor, >> + bool enable) >> +{ >> + u32 val; >> + >> + val = omap_temp_sensor_readl(temp_sensor, >> + temp_sensor->registers->bgap_mode_ctrl); >> + >> + if (enable) >> + val |= (1 << __ffs(temp_sensor->registers->mode_ctrl_mask)); >> + else >> + val &= ~(temp_sensor->registers->mode_ctrl_mask); >> + >> + omap_temp_sensor_writel(temp_sensor, val, >> + temp_sensor->registers->bgap_mode_ctrl); >> +} >> + >> +/* Sysfs hook functions */ >> + >> +static ssize_t show_temp_max(struct device *dev, >> + struct device_attribute *devattr, char *buf) >> +{ >> + struct omap_temp_sensor *temp_sensor = dev_get_drvdata(dev); >> + int temp; >> + >> + mutex_lock(&temp_sensor->sensor_mutex); >> + >> + temp = omap_temp_sensor_readl(temp_sensor, >> + temp_sensor->registers->bgap_threshold); >> + temp = (temp & temp_sensor->registers->threshold_thot_mask) >> + >> __ffs(temp_sensor->registers->threshold_thot_mask); >> + >> + if (temp < OMAP_ADC_START_VALUE || temp > OMAP_ADC_END_VALUE) { >> + dev_err(dev, "invalid value\n"); >> + mutex_unlock(&temp_sensor->sensor_mutex); >> + return -EINVAL; >> + } >> + >> + temp = adc_to_temp_conversion(temp); >> + mutex_unlock(&temp_sensor->sensor_mutex); >> + >> + return snprintf(buf, 16, "%d\n", temp); >> +} >> + >> +static ssize_t set_temp_max(struct device *dev, >> + struct device_attribute *devattr, >> + const char *buf, size_t count) >> +{ >> + struct omap_temp_sensor *temp_sensor = dev_get_drvdata(dev); >> + long val; >> + u32 reg_val, t_cold, t_hot, temp; >> + >> + mutex_lock(&temp_sensor->sensor_mutex); >> + >> + if (strict_strtol(buf, 10, &val)) { >> + count = -EINVAL; >> + goto out; >> + } >> + >> + t_hot = temp_to_adc_conversion(val); >> + if ((t_hot < OMAP_ADC_START_VALUE || t_hot > OMAP_ADC_END_VALUE)) { >> + dev_err(dev, "invalid range\n"); >> + count = -EINVAL; >> + goto out; >> + } >> + >> + /* obtain the T cold value */ >> + t_cold = omap_temp_sensor_readl(temp_sensor, >> + temp_sensor->registers->bgap_threshold); >> + t_cold = (t_cold & temp_sensor->registers->threshold_tcold_mask) >> >> + __ffs(temp_sensor->registers->threshold_tcold_mask); >> + >> + if (t_hot < t_cold) { >> + dev_err(dev, "Error! T_HOT value lesser than T_COLD\n"); >> + count = -EINVAL; >> + goto out; >> + } >> + >> + /* write the new t_hot value */ >> + reg_val = omap_temp_sensor_readl(temp_sensor, >> + temp_sensor->registers->bgap_threshold); >> + reg_val &= ~(temp_sensor->registers->threshold_thot_mask); >> + reg_val |= (t_hot << >> + __ffs(temp_sensor->registers->threshold_thot_mask)); >> + omap_temp_sensor_writel(temp_sensor, reg_val, >> + temp_sensor->registers->bgap_threshold); >> + >> + /* Read the current temperature */ >> + temp = omap_temp_sensor_readl(temp_sensor, >> + temp_sensor->registers->temp_sensor_ctrl); >> + temp &= (temp_sensor->registers->bgap_dtemp_mask); >> + >> + /* >> + * If user sets the HIGH threshold(t_hot) greater than the current >> + * temperature(temp) unmask the HOT interrupts >> + */ >> + if (t_hot > temp) { >> + reg_val = omap_temp_sensor_readl(temp_sensor, >> + temp_sensor->registers->bgap_mask_ctrl); >> + reg_val &= ~(temp_sensor->registers->mask_cold_mask); >> + reg_val |= temp_sensor->registers->mask_hot_mask; >> + omap_temp_sensor_writel(temp_sensor, reg_val, >> + temp_sensor->registers->bgap_mask_ctrl); >> + } >> + >> + /* >> + * If current temperature is in-between the hot and cold thresholds, >> + * Enable both masks. >> + */ >> + if (temp > t_cold && temp < t_hot) { >> + reg_val = omap_temp_sensor_readl(temp_sensor, >> + temp_sensor->registers->bgap_mask_ctrl); >> + reg_val |= temp_sensor->registers->mask_cold_mask; >> + reg_val |= temp_sensor->registers->mask_hot_mask; >> + omap_temp_sensor_writel(temp_sensor, reg_val, >> + OMAP4460_BGAP_CTRL_OFFSET); >> + } >> + /* >> + * else no need to do anything since HW will immediately compare >> + * the new threshold and generate interrupt accordingly >> + */ >> +out: >> + mutex_unlock(&temp_sensor->sensor_mutex); >> + return count; >> +} >> + >> +static ssize_t show_temp_max_hyst(struct device *dev, >> + struct device_attribute *devattr, char *buf) >> +{ >> + struct omap_temp_sensor *temp_sensor = dev_get_drvdata(dev); >> + u32 temp; >> + >> + mutex_lock(&temp_sensor->sensor_mutex); >> + >> + temp = omap_temp_sensor_readl(temp_sensor, >> + temp_sensor->registers->bgap_threshold); >> + temp = (temp & temp_sensor->registers->threshold_tcold_mask) >> >> + __ffs(temp_sensor->registers->threshold_tcold_mask); >> + >> + if (temp < OMAP_ADC_START_VALUE || temp > OMAP_ADC_END_VALUE) { >> + dev_err(dev, "invalid value\n"); >> + mutex_unlock(&temp_sensor->sensor_mutex); >> + return -EINVAL; >> + } >> + >> + temp = adc_to_temp_conversion(temp); >> + mutex_unlock(&temp_sensor->sensor_mutex); >> + >> + return snprintf(buf, 16, "%d\n", temp); >> +} >> + >> +static ssize_t set_temp_max_hyst(struct device *dev, >> + struct device_attribute *devattr, >> + const char *buf, size_t count) >> +{ >> + struct omap_temp_sensor *temp_sensor = dev_get_drvdata(dev); >> + u32 reg_val, t_hot, t_cold, temp; >> + long val; >> + >> + mutex_lock(&temp_sensor->sensor_mutex); >> + >> + if (strict_strtol(buf, 10, &val)) { >> + count = -EINVAL; >> + goto out; >> + } >> + >> + t_cold = temp_to_adc_conversion(val); >> + if (t_cold < OMAP_ADC_START_VALUE || t_cold > OMAP_ADC_END_VALUE) { >> + dev_err(dev, "invalid range"); >> + count = -EINVAL; >> + goto out; >> + } >> + >> + /* obtain the T HOT value */ >> + t_hot = omap_temp_sensor_readl(temp_sensor, >> + temp_sensor->registers->bgap_threshold); >> + t_hot = (t_hot & temp_sensor->registers->threshold_thot_mask) >> >> + __ffs(temp_sensor->registers->threshold_thot_mask); >> + >> + if (t_cold > t_hot) { >> + dev_err(dev, "Error! T_COLD value greater than T_HOT\n"); >> + count = -EINVAL; >> + goto out; >> + } >> + >> + /* write the new t_cold value */ >> + reg_val = omap_temp_sensor_readl(temp_sensor, >> + temp_sensor->registers->bgap_threshold); >> + reg_val &= ~(temp_sensor->registers->threshold_tcold_mask); >> + reg_val |= (t_cold << >> + __ffs(temp_sensor->registers->threshold_tcold_mask)); >> + omap_temp_sensor_writel(temp_sensor, reg_val, >> + temp_sensor->registers->bgap_threshold); >> + >> + /* Read the current temperature */ >> + temp = omap_temp_sensor_readl(temp_sensor, >> + temp_sensor->registers->temp_sensor_ctrl); >> + temp &= (temp_sensor->registers->bgap_dtemp_mask); >> + >> + /* >> + * If user sets the LOW threshold(t_cold) lower than the current >> + * temperature(temp) unmask the COLD interrupts >> + */ >> + if (t_cold < temp) { >> + reg_val = omap_temp_sensor_readl(temp_sensor, >> + temp_sensor->registers->bgap_mask_ctrl); >> + reg_val &= ~(temp_sensor->registers->mask_hot_mask); >> + reg_val |= temp_sensor->registers->mask_cold_mask; >> + omap_temp_sensor_writel(temp_sensor, reg_val, >> + temp_sensor->registers->bgap_mask_ctrl); >> + } >> + >> + /* >> + * If current temperature is in-between the hot and cold thresholds, >> + * Enable both masks. >> + */ >> + if (temp < t_hot && temp > t_cold) { >> + reg_val = omap_temp_sensor_readl(temp_sensor, >> + temp_sensor->registers->bgap_mask_ctrl); >> + reg_val |= temp_sensor->registers->mask_cold_mask; >> + reg_val |= temp_sensor->registers->mask_hot_mask; >> + omap_temp_sensor_writel(temp_sensor, reg_val, >> + temp_sensor->registers->bgap_mask_ctrl); >> + } >> + >> + /* >> + * else no need to do anything since HW will immediately compare >> + * the new threshold and generate interrupt accordingly >> + */ >> + >> +out: >> + mutex_unlock(&temp_sensor->sensor_mutex); >> + return count; >> +} >> + >> +static ssize_t show_update_rate(struct device *dev, >> + struct device_attribute *devattr, char *buf) >> +{ >> + struct omap_temp_sensor *temp_sensor = dev_get_drvdata(dev); >> + u32 temp = 0, ret = 0; >> + >> + mutex_lock(&temp_sensor->sensor_mutex); >> + >> + if (!temp_sensor->clk_rate) { >> + dev_err(dev, "clk_rate is NULL\n"); >> + ret = -EINVAL; >> + goto out; >> + } >> + >> + temp = omap_temp_sensor_readl(temp_sensor, >> + temp_sensor->registers->bgap_counter); >> + temp = (temp & temp_sensor->registers->counter_mask) >> >> + __ffs(temp_sensor->registers->counter_mask); >> + temp = temp * 1000 / (temp_sensor->clk_rate); >> + >> +out: >> + mutex_unlock(&temp_sensor->sensor_mutex); >> + if (!ret) >> + return sprintf(buf, "%d\n", temp); >> + >> + return ret; >> +} >> + >> +static ssize_t set_update_rate(struct device *dev, >> + struct device_attribute *devattr, >> + const char *buf, size_t count) >> +{ >> + struct omap_temp_sensor *temp_sensor = dev_get_drvdata(dev); >> + u32 reg_val; >> + long val; >> + >> + mutex_lock(&temp_sensor->sensor_mutex); >> + >> + if (strict_strtol(buf, 10, &val)) { >> + count = -EINVAL; >> + goto out; >> + } >> + >> + val *= temp_sensor->clk_rate / 1000; >> + reg_val = omap_temp_sensor_readl(temp_sensor, >> + temp_sensor->registers->bgap_counter); >> + >> + reg_val &= ~(temp_sensor->registers->counter_mask); >> + reg_val |= val; >> + omap_temp_sensor_writel(temp_sensor, reg_val, >> + temp_sensor->registers->bgap_counter); >> + >> +out: >> + mutex_unlock(&temp_sensor->sensor_mutex); >> + return count; >> +} >> + >> +static int omap_temp_sensor_read_temp(struct device *dev, >> + struct device_attribute *devattr, >> + char *buf) >> +{ >> + struct omap_temp_sensor *temp_sensor = dev_get_drvdata(dev); >> + int temp, ret = 0; >> + >> + mutex_lock(&temp_sensor->sensor_mutex); >> + >> + temp = omap_temp_sensor_readl(temp_sensor, >> + temp_sensor->registers->temp_sensor_ctrl); >> + temp &= temp_sensor->registers->bgap_dtemp_mask; >> + >> + if (!temp_sensor->is_efuse_valid) >> + dev_err(dev, "Invalid EFUSE, Non-trimmed BGAP, Temp not >> accurate\n"); >> + >> + /* look up for temperature in the table and return the temperature */ >> + if (temp < OMAP_ADC_START_VALUE || temp > OMAP_ADC_END_VALUE) { >> + dev_err(dev, "invalid adc code reported %d", temp); >> + ret = -EINVAL; >> + goto out; >> + } >> + >> + temp = adc_to_temp[temp - OMAP_ADC_START_VALUE]; >> + >> +out: >> + mutex_unlock(&temp_sensor->sensor_mutex); >> + if (!ret) >> + return sprintf(buf, "%d\n", temp); >> + >> + return ret; >> +} >> + >> +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, omap_temp_sensor_read_temp, >> + NULL, 0); >> +static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, >> + set_temp_max, 0); >> +static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, >> show_temp_max_hyst, >> + set_temp_max_hyst, 0); >> +static SENSOR_DEVICE_ATTR(update_rate, S_IWUSR | S_IRUGO, show_update_rate, >> + set_update_rate, 0); >> + >> +static struct attribute *omap_temp_sensor_attributes[] = { >> + &sensor_dev_attr_temp1_input.dev_attr.attr, >> + &sensor_dev_attr_temp1_max.dev_attr.attr, >> + &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, >> + &sensor_dev_attr_update_rate.dev_attr.attr, >> + NULL >> +}; >> + >> +static const struct attribute_group omap_temp_sensor_group = { >> + .attrs = omap_temp_sensor_attributes, >> +}; >> + >> +static int omap_temp_sensor_clk_enable(struct omap_temp_sensor *temp_sensor) >> +{ >> + u32 ret = 0; >> + >> + if (temp_sensor->clk_on) { >> + dev_err(temp_sensor->hwmon_dev, "clock already on\n"); >> + goto out; >> + } >> + >> + ret = pm_runtime_get_sync(temp_sensor->hwmon_dev); >> + if (ret < 0) { >> + dev_err(temp_sensor->hwmon_dev, "get sync failed\n"); >> + goto out; >> + } >> + >> + temp_sensor->clk_on = 1; >> + >> +out: >> + return ret; >> +} >> + >> +static int omap_temp_sensor_clk_disable(struct omap_temp_sensor >> *temp_sensor) >> +{ >> + u32 ret = 0; >> + >> + if (!temp_sensor->clk_on) { >> + dev_err(temp_sensor->hwmon_dev, "clock already off\n"); >> + goto out; >> + } >> + >> + /* Gate the clock */ >> + ret = pm_runtime_put_sync(temp_sensor->hwmon_dev); >> + if (ret < 0) { >> + dev_err(temp_sensor->hwmon_dev, "put sync failed\n"); >> + goto out; >> + } >> + temp_sensor->clk_on = 0; >> + >> +out: >> + return ret; >> +} >> + >> +static irqreturn_t omap_talert_irq_handler(int irq, void *data) >> +{ >> + struct omap_temp_sensor *temp_sensor; >> + int t_hot, t_cold, temp; >> + >> + temp_sensor = data; >> + mutex_lock(&temp_sensor->sensor_mutex); >> + >> + /* Read the status of t_hot */ >> + t_hot = omap_temp_sensor_readl(temp_sensor, >> + temp_sensor->registers->bgap_status) >> + & temp_sensor->registers->status_hot_mask; >> + >> + /* Read the status of t_cold */ >> + t_cold = omap_temp_sensor_readl(temp_sensor, >> + temp_sensor->registers->bgap_status) >> + & temp_sensor->registers->status_cold_mask; >> + >> + temp = omap_temp_sensor_readl(temp_sensor, >> + temp_sensor->registers->bgap_mask_ctrl); >> + /* >> + * One TALERT interrupt: Two sources >> + * If the interrupt is due to t_hot then mask t_hot and >> + * and unmask t_cold else mask t_cold and unmask t_hot >> + */ >> + if (t_hot) { >> + temp &= ~(temp_sensor->registers->mask_hot_mask); >> + temp |= temp_sensor->registers->mask_cold_mask; >> + } else if (t_cold) { >> + temp &= ~(temp_sensor->registers->mask_cold_mask); >> + temp |= temp_sensor->registers->mask_hot_mask; >> + } >> + >> + omap_temp_sensor_writel(temp_sensor, temp, >> + temp_sensor->registers->bgap_mask_ctrl); >> + >> + /* kobject_uvent to user space telling thermal threshold crossed */ >> + kobject_uevent(&temp_sensor->hwmon_dev->kobj, KOBJ_CHANGE); >> + >> + mutex_unlock(&temp_sensor->sensor_mutex); >> + >> + return IRQ_HANDLED; >> +} >> + >> +static int __devinit omap_temp_sensor_probe(struct platform_device *pdev) >> +{ >> + struct omap_temp_sensor_pdata *pdata = pdev->dev.platform_data; >> + struct omap_temp_sensor *temp_sensor; >> + struct resource *mem; >> + int ret = 0; >> + int val, clk_rate; >> + >> + if (!pdata) { >> + dev_err(&pdev->dev, "platform data missing\n"); >> + return -EINVAL; >> + } >> + >> + temp_sensor = kzalloc(sizeof(*temp_sensor), GFP_KERNEL); >> + if (!temp_sensor) >> + return -ENOMEM; >> + >> + mutex_init(&temp_sensor->sensor_mutex); >> + >> + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); >> + if (!mem) { >> + dev_err(&pdev->dev, "no mem resource\n"); >> + ret = -ENOMEM; >> + goto plat_res_err; >> + } >> + >> + temp_sensor->irq = platform_get_irq_byname(pdev, "thermal_alert"); >> + if (temp_sensor->irq < 0) { >> + dev_err(&pdev->dev, "get_irq_byname failed\n"); >> + ret = temp_sensor->irq; >> + goto plat_res_err; >> + } >> + >> + temp_sensor->phy_base = ioremap(mem->start, resource_size(mem)); >> + temp_sensor->clock = NULL; >> + temp_sensor->registers = pdata->registers; >> + temp_sensor->hwmon_dev = &pdev->dev; >> + >> + pm_runtime_enable(&pdev->dev); >> + pm_runtime_irq_safe(&pdev->dev); >> + >> + /* >> + * check if the efuse has a non-zero value if not >> + * it is an untrimmed sample and the temperatures >> + * may not be accurate >> + */ >> + >> + if (omap_temp_sensor_readl(temp_sensor, >> + temp_sensor->registers->bgap_efuse)) >> + temp_sensor->is_efuse_valid = 1; >> + >> + platform_set_drvdata(pdev, temp_sensor); >> + dev_set_drvdata(&pdev->dev, temp_sensor); >> + temp_sensor->clock = clk_get(temp_sensor->hwmon_dev, "fck"); >> + if (IS_ERR(temp_sensor->clock)) { >> + ret = PTR_ERR(temp_sensor->clock); >> + dev_err(temp_sensor->hwmon_dev, >> + "unable to get fclk: %d\n", ret); >> + ret = -EINVAL; >> + goto plat_res_err; >> + } >> + >> + ret = omap_temp_sensor_clk_enable(temp_sensor); >> + if (ret) { >> + dev_err(&pdev->dev, "Cannot enable temp sensor\n"); >> + goto clken_err; >> + } >> + >> + clk_rate = clk_round_rate(temp_sensor->clock, 2000000); >> + if (clk_rate < 1000000 || clk_rate == 0xffffffff) { >> + dev_err(&pdev->dev, "Error round rate\n"); >> + ret = -EINVAL; >> + goto clken_err; >> + } >> + >> + ret = clk_set_rate(temp_sensor->clock, clk_rate); >> + if (ret) { >> + dev_err(&pdev->dev, "Cannot set clock rate\n"); >> + goto clken_err; >> + } >> + >> + temp_sensor->clk_rate = clk_rate; >> + omap_enable_continuous_mode(temp_sensor, 1); >> + omap_configure_temp_sensor_thresholds(temp_sensor); >> + /* 1 ms */ >> + omap_configure_temp_sensor_counter(temp_sensor, 1); >> + >> + /* Wait till the first conversion is done wait for at least 1ms */ >> + usleep_range(1000, 2000); >> + >> + /* Read the temperature once due to hw issue*/ >> + omap_temp_sensor_readl(temp_sensor, >> + temp_sensor->registers->temp_sensor_ctrl); >> + >> + /* Set 2 seconds time as default counter */ >> + omap_configure_temp_sensor_counter(temp_sensor, >> + temp_sensor->clk_rate * 2); >> + >> + temp_sensor->hwmon_dev = hwmon_device_register(&pdev->dev); >> + if (IS_ERR(temp_sensor->hwmon_dev)) { >> + dev_err(&pdev->dev, "hwmon_device_register failed.\n"); >> + ret = PTR_ERR(temp_sensor->hwmon_dev); >> + goto hwmon_reg_err; >> + } >> + >> + ret = sysfs_create_group(&pdev->dev.kobj, >> + &omap_temp_sensor_group); >> + if (ret) { >> + dev_err(&pdev->dev, "could not create sysfs files\n"); >> + goto sysfs_create_err; >> + } >> + >> + kobject_uevent(&temp_sensor->hwmon_dev->kobj, KOBJ_ADD); >> + >> + ret = request_threaded_irq(temp_sensor->irq, NULL, >> + omap_talert_irq_handler, IRQF_TRIGGER_RISING | IRQF_ONESHOT, >> + "temp_sensor", temp_sensor); >> + if (ret) { >> + dev_err(&pdev->dev, "Request threaded irq failed.\n"); >> + goto req_irq_err; >> + } >> + >> + /* unmask the T_COLD and unmask T_HOT at init */ >> + val = omap_temp_sensor_readl(temp_sensor, >> + temp_sensor->registers->bgap_mask_ctrl); >> + val |= temp_sensor->registers->mask_cold_mask >> + | temp_sensor->registers->mask_hot_mask; >> + >> + omap_temp_sensor_writel(temp_sensor, val, >> + temp_sensor->registers->bgap_mask_ctrl); >> + >> + return 0; >> + >> +req_irq_err: >> + kobject_uevent(&temp_sensor->hwmon_dev->kobj, KOBJ_REMOVE); >> + sysfs_remove_group(&temp_sensor->hwmon_dev->kobj, >> + &omap_temp_sensor_group); >> +sysfs_create_err: >> + hwmon_device_unregister(&pdev->dev); >> +hwmon_reg_err: >> + omap_temp_sensor_clk_disable(temp_sensor); >> +clken_err: >> + clk_put(temp_sensor->clock); >> +plat_res_err: >> + mutex_destroy(&temp_sensor->sensor_mutex); >> + kfree(temp_sensor); >> + return ret; >> +} >> + >> +static int __devexit omap_temp_sensor_remove(struct platform_device *pdev) >> +{ >> + struct omap_temp_sensor *temp_sensor = platform_get_drvdata(pdev); >> + >> + hwmon_device_unregister(&pdev->dev); >> + kobject_uevent(&temp_sensor->hwmon_dev->kobj, KOBJ_REMOVE); >> + sysfs_remove_group(&temp_sensor->hwmon_dev->kobj, >> + &omap_temp_sensor_group); >> + omap_temp_sensor_clk_disable(temp_sensor); >> + clk_put(temp_sensor->clock); >> + platform_set_drvdata(pdev, NULL); >> + free_irq(temp_sensor->irq, temp_sensor); >> + mutex_destroy(&temp_sensor->sensor_mutex); >> + kfree(temp_sensor); >> + >> + return 0; >> +} >> + >> +#ifdef CONFIG_PM >> +static void omap_temp_sensor_save_ctxt(struct omap_temp_sensor *temp_sensor) >> +{ >> + temp_sensor->temp_sensor_ctrl = omap_temp_sensor_readl(temp_sensor, >> + temp_sensor->registers->temp_sensor_ctrl); >> + temp_sensor->bg_ctrl = omap_temp_sensor_readl(temp_sensor, >> + temp_sensor->registers->bgap_mask_ctrl); >> + temp_sensor->bg_counter = omap_temp_sensor_readl(temp_sensor, >> + temp_sensor->registers->bgap_counter); >> + temp_sensor->bg_threshold = omap_temp_sensor_readl(temp_sensor, >> + temp_sensor->registers->bgap_threshold); >> + temp_sensor->temp_sensor_tshut_threshold = >> + omap_temp_sensor_readl(temp_sensor, >> + temp_sensor->registers->thsut_threshold); >> +} >> + >> +static void omap_temp_sensor_restore_ctxt(struct omap_temp_sensor >> *temp_sensor) >> +{ >> + omap_temp_sensor_writel(temp_sensor, >> + temp_sensor->temp_sensor_ctrl, >> + temp_sensor->registers->temp_sensor_ctrl); >> + omap_temp_sensor_writel(temp_sensor, >> + temp_sensor->bg_ctrl, >> + temp_sensor->registers->bgap_mask_ctrl); >> + omap_temp_sensor_writel(temp_sensor, >> + temp_sensor->bg_counter, >> + temp_sensor->registers->bgap_counter); >> + omap_temp_sensor_writel(temp_sensor, >> + temp_sensor->bg_threshold, >> + temp_sensor->registers->bgap_threshold); >> + omap_temp_sensor_writel(temp_sensor, >> + temp_sensor->temp_sensor_tshut_threshold, >> + temp_sensor->registers->thsut_threshold); >> +} >> + >> +static int omap_temp_sensor_suspend(struct device *dev) >> +{ >> + struct omap_temp_sensor *temp_sensor = dev_get_drvdata(dev); >> + >> + omap_temp_sensor_save_ctxt(temp_sensor); >> + >> + return 0; >> +} >> + >> +static int omap_temp_sensor_resume(struct device *dev) >> +{ >> + struct omap_temp_sensor *temp_sensor = dev_get_drvdata(dev); >> + >> + omap_temp_sensor_restore_ctxt(temp_sensor); >> + >> + return 0; >> +} >> + >> +static int omap_temp_sensor_runtime_suspend(struct device *dev) >> +{ >> + struct omap_temp_sensor *temp_sensor = dev_get_drvdata(dev); >> + >> + omap_temp_sensor_save_ctxt(temp_sensor); >> + >> + return 0; >> +} >> + >> +static int omap_temp_sensor_runtime_resume(struct device *dev) >> +{ >> + static int context_loss_count; >> + int temp; >> + struct omap_temp_sensor *temp_sensor = dev_get_drvdata(dev); >> + >> + temp = omap_device_get_context_loss_count(to_platform_device(dev)); >> + >> + if (temp != context_loss_count && context_loss_count != 0) >> + omap_temp_sensor_restore_ctxt(temp_sensor); >> + >> + context_loss_count = temp; >> + >> + return 0; >> +} >> + >> +static const struct dev_pm_ops omap_temp_sensor_dev_pm_ops = { >> + .suspend = omap_temp_sensor_suspend, >> + .resume = omap_temp_sensor_resume, >> + .runtime_suspend = omap_temp_sensor_runtime_suspend, >> + .runtime_resume = omap_temp_sensor_runtime_resume, >> +}; > > this is not enough... you need to populate the other fields. You might > want to use something like: > > static const struct dev_pm_ops omap_temp_sensor_dev_pm_ops = { > SET_SYSTEM_SLEEP_PM_OPS(omap_temp_sensor_suspend, > omap_temp_sensor_resume) > SET_RUNTIME_PM_OPS(omap_temp_sensor_runtime_suspend, > omap_temp_sensor_runtime_resume, omap_temp_sensor_idle) > };
omap_temp_sensor_idle is undefined for temperature sensor as of now. So i will populate these fields once the idle function is defined. > >> + >> +#endif > > instead of endif, try something like: > > dev_pm_ops.... > > #define DEV_PM_OPS (&omap_temp_sensor_dev_pm_ops) > #else > #define DEV_PM_OPS NULL > #endif > > then you can remove the ifdef on the driver structure. Ok > > -- > balbi > -- Regards and Thanks, Keerthy -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html