+ Rajendra and Benoit to comment on optional clock
handling.
On Thursday 04 August 2011 04:34 PM, Tarun Kanti DebBarma wrote:
Call runtime pm APIs pm_runtime_get_sync() and pm_runtime_put_sync()
for enabling/disabling clocks appropriately. Remove syscore_ops and
instead use dev_pm_ops now.
Signed-off-by: Charulatha V<ch...@ti.com>
Signed-off-by: Tarun Kanti DebBarma<tarun.ka...@ti.com>
---
drivers/gpio/gpio-omap.c | 89 ++++++++++++++++++++++++++++++++++-----------
1 files changed, 67 insertions(+), 22 deletions(-)
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 0545d8f..bca6dcd 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -79,6 +79,8 @@ struct gpio_bank {
struct omap_gpio_reg_offs *regs;
};
+static void omap_gpio_mod_init(struct gpio_bank *bank);
+
#define GPIO_INDEX(bank, gpio) (gpio % bank->width)
#define GPIO_BIT(bank, gpio) (1<< GPIO_INDEX(bank, gpio))
#define GPIO_MOD_CTRL_BIT BIT(0)
@@ -481,6 +483,19 @@ static int omap_gpio_request(struct gpio_chip *chip,
unsigned offset)
spin_lock_irqsave(&bank->lock, flags);
+ /*
+ * If this is the first gpio_request for the bank,
+ * enable the bank module.
+ */
+ if (!bank->mod_usage)
+ if (IS_ERR_VALUE(pm_runtime_get_sync(bank->dev)< 0)) {
+ dev_err(bank->dev, "%s: GPIO bank %d "
+ "pm_runtime_get_sync failed\n",
+ __func__, bank->id);
+ spin_unlock_irqrestore(&bank->lock, flags);
+ return -EINVAL;
+ }
+
/* Set trigger to none. You need to enable the desired trigger with
* request_irq() or set_irq_type().
*/
@@ -535,6 +550,19 @@ static void omap_gpio_free(struct gpio_chip *chip,
unsigned offset)
}
_reset_gpio(bank, bank->chip.base + offset);
+
+ /*
+ * If this is the last gpio to be freed in the bank,
+ * disable the bank module.
+ */
+ if (!bank->mod_usage) {
+ if (IS_ERR_VALUE(pm_runtime_put_sync(bank->dev)< 0)) {
+ dev_err(bank->dev, "%s: GPIO bank %d "
+ "pm_runtime_put_sync failed\n",
+ __func__, bank->id);
+ }
+ }
+
spin_unlock_irqrestore(&bank->lock, flags);
}
@@ -561,6 +589,7 @@ static void gpio_irq_handler(unsigned int irq, struct
irq_desc *desc)
bank = irq_get_handler_data(irq);
isr_reg = bank->base + bank->regs->irqstatus;
+ pm_runtime_get_sync(bank->dev);
if (WARN_ON(!isr_reg))
goto exit;
@@ -622,6 +651,7 @@ static void gpio_irq_handler(unsigned int irq, struct
irq_desc *desc)
exit:
if (!unmasked)
chained_irq_exit(chip, desc);
+ pm_runtime_put_sync_suspend(bank->dev);
}
static void gpio_irq_shutdown(struct irq_data *d)
@@ -1023,7 +1053,13 @@ static int __devinit omap_gpio_probe(struct
platform_device *pdev)
}
pm_runtime_enable(bank->dev);
- pm_runtime_get_sync(bank->dev);
+ pm_runtime_irq_safe(bank->dev);
+ if (IS_ERR_VALUE(pm_runtime_get_sync(bank->dev)< 0)) {
+ dev_err(bank->dev, "%s: GPIO bank %d pm_runtime_get_sync "
+ "failed\n", __func__, bank->id);
+ iounmap(bank->base);
+ return -EINVAL;
+ }
if (bank->is_mpuio) {
if (bank->regs->wkup_status)
@@ -1034,6 +1070,13 @@ static int __devinit omap_gpio_probe(struct
platform_device *pdev)
omap_gpio_chip_init(bank);
omap_gpio_show_rev(bank);
+ if (IS_ERR_VALUE(pm_runtime_put_sync(bank->dev)< 0)) {
+ dev_err(bank->dev, "%s: GPIO bank %d pm_runtime_put_sync "
+ "failed\n", __func__, bank->id);
+ iounmap(bank->base);
+ return -EINVAL;
+ }
+
list_add_tail(&bank->node,&omap_gpio_list);
return ret;
@@ -1044,7 +1087,7 @@ err_exit:
return ret;
}
-static int omap_gpio_suspend(void)
+static int omap_gpio_suspend(struct device *dev)
{
struct gpio_bank *bank;
@@ -1063,12 +1106,13 @@ static int omap_gpio_suspend(void)
_gpio_rmw(base, bank->regs->wkup_status,
bank->suspend_wakeup, 1);
spin_unlock_irqrestore(&bank->lock, flags);
+ pm_runtime_put_sync(dev);
}
return 0;
}
-static void omap_gpio_resume(void)
+static int omap_gpio_resume(struct device *dev)
{
struct gpio_bank *bank;
@@ -1077,18 +1121,16 @@ static void omap_gpio_resume(void)
unsigned long flags;
if (!bank->regs->wkup_status)
- return;
+ return 0;
+ pm_runtime_get_sync(dev);
spin_lock_irqsave(&bank->lock, flags);
_gpio_rmw(base, bank->regs->wkup_status, bank->saved_wakeup, 1);
spin_unlock_irqrestore(&bank->lock, flags);
}
-}
-static struct syscore_ops omap_gpio_syscore_ops = {
- .suspend = omap_gpio_suspend,
- .resume = omap_gpio_resume,
-};
+ return 0;
+}
#ifdef CONFIG_ARCH_OMAP2PLUS
@@ -1112,6 +1154,11 @@ void omap2_gpio_prepare_for_idle(int off_mode)
if (!off_mode)
continue;
+ if (IS_ERR_VALUE(pm_runtime_put_sync(bank->dev)< 0))
+ dev_err(bank->dev, "%s: GPIO bank %d "
+ "pm_runtime_put_sync failed\n",
+ __func__, bank->id);
+
/* If going to OFF, remove triggering for all
* non-wakeup GPIOs. Otherwise spurious IRQs will be
* generated. See OMAP2420 Errata item 1.101. */
@@ -1152,6 +1199,11 @@ void omap2_gpio_resume_after_idle(void)
if (!bank->loses_context)
continue;
+ if (IS_ERR_VALUE(pm_runtime_get_sync(bank->dev)< 0))
+ dev_err(bank->dev, "%s: GPIO bank %d "
+ "pm_runtime_get_sync failed\n",
+ __func__, bank->id);
+
for (j = 0; j< hweight_long(bank->dbck_enable_mask); j++)
clk_enable(bank->dbck);
Optional clock handling also should been addressed using runtime hooks,
isn't it ?
We still seems to use clock framework here?
Regards
Santosh
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
