- Add an i2c_slave_address field to the omap_vc_channel
- use VC/VP read/modify/write helper instead of open-coding
- remove smps_sa_shift, use __ffs(mask) for shift value
- I2C addresses 10-bit, change size to u16
Special thanks to Shweta Gulati <shweta.gul...@ti.com> for suggesting
the use of __ffs(x) instead of ffs(x) - 1.
Signed-off-by: Kevin Hilman <khil...@ti.com>
---
arch/arm/mach-omap2/vc.c | 12 +++++++-----
arch/arm/mach-omap2/vc.h | 8 +++++---
arch/arm/mach-omap2/vc3xxx_data.c | 2 --
arch/arm/mach-omap2/vc44xx_data.c | 3 ---
arch/arm/mach-omap2/voltage.h | 2 +-
5 files changed, 13 insertions(+), 14 deletions(-)
diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
index 9c2706c..ca6165d 100644
--- a/arch/arm/mach-omap2/vc.c
+++ b/arch/arm/mach-omap2/vc.c
@@ -232,11 +232,13 @@ void __init omap_vc_init_channel(struct voltagedomain
*voltdm)
return;
}
- /* Set up the SMPS_SA(i2c slave address in VC */
- vc_val = voltdm->read(vc->common->smps_sa_reg);
- vc_val &= ~vc->smps_sa_mask;
- vc_val |= vdd->pmic_info->i2c_slave_addr << vc->smps_sa_shift;
- voltdm->write(vc_val, vc->common->smps_sa_reg);
+ /* get PMIC/board specific settings */
+ vc->i2c_slave_addr = vdd->pmic_info->i2c_slave_addr;
+
+ /* Configure the i2c slave address for this VC */
+ voltdm->rmw(vc->smps_sa_mask,
+ vc->i2c_slave_addr << __ffs(vc->smps_sa_mask),
+ vc->common->smps_sa_reg);
/* Setup the VOLRA(pmic reg addr) in VC */
vc_val = voltdm->read(vc->common->smps_volra_reg);
diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h
index d0050f0..165fc74 100644
--- a/arch/arm/mach-omap2/vc.h
+++ b/arch/arm/mach-omap2/vc.h
@@ -57,20 +57,22 @@ struct omap_vc_common {
/**
* struct omap_vc_channel - VC per-instance data
* @common: pointer to VC common data for this platform
- * @smps_sa_mask: SA* bitmask in the PRM_VC_SMPS_SA register
+ * @smps_sa_mask: i2c slave address bitmask in the PRM_VC_SMPS_SA register
* @smps_volra_mask: VOLRA* bitmask in the PRM_VC_VOL_RA register
- * @smps_sa_shift: SA* field shift in the PRM_VC_SMPS_SA register
* @smps_volra_shift: VOLRA* field shift in the PRM_VC_VOL_RA register
*
* XXX It is not necessary to have both a *_mask and a *_shift -
* remove one
*/
struct omap_vc_channel {
+ /* channel state */
+ u16 i2c_slave_addr;
+
+ /* register access data */
const struct omap_vc_common *common;
u32 smps_sa_mask;
u32 smps_volra_mask;
u8 cmdval_reg;
- u8 smps_sa_shift;
u8 smps_volra_shift;
};
diff --git a/arch/arm/mach-omap2/vc3xxx_data.c
b/arch/arm/mach-omap2/vc3xxx_data.c
index 6b67203..86be50c 100644
--- a/arch/arm/mach-omap2/vc3xxx_data.c
+++ b/arch/arm/mach-omap2/vc3xxx_data.c
@@ -47,7 +47,6 @@ static struct omap_vc_common omap3_vc_common = {
struct omap_vc_channel omap3_vc_mpu = {
.common = &omap3_vc_common,
.cmdval_reg = OMAP3_PRM_VC_CMD_VAL_0_OFFSET,
- .smps_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA0_SHIFT,
.smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA0_MASK,
.smps_volra_shift = OMAP3430_VOLRA0_SHIFT,
.smps_volra_mask = OMAP3430_VOLRA0_MASK,
@@ -56,7 +55,6 @@ struct omap_vc_channel omap3_vc_mpu = {
struct omap_vc_channel omap3_vc_core = {
.common = &omap3_vc_common,
.cmdval_reg = OMAP3_PRM_VC_CMD_VAL_1_OFFSET,
- .smps_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA1_SHIFT,
.smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA1_MASK,
.smps_volra_shift = OMAP3430_VOLRA1_SHIFT,
.smps_volra_mask = OMAP3430_VOLRA1_MASK,
diff --git a/arch/arm/mach-omap2/vc44xx_data.c
b/arch/arm/mach-omap2/vc44xx_data.c
index e3125a3..af922b4 100644
--- a/arch/arm/mach-omap2/vc44xx_data.c
+++ b/arch/arm/mach-omap2/vc44xx_data.c
@@ -49,7 +49,6 @@ static const struct omap_vc_common omap4_vc_common = {
struct omap_vc_channel omap4_vc_mpu = {
.common = &omap4_vc_common,
.cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_MPU_L_OFFSET,
- .smps_sa_shift = OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_SHIFT,
.smps_sa_mask = OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_MASK,
.smps_volra_shift = OMAP4430_VOLRA_VDD_MPU_L_SHIFT,
.smps_volra_mask = OMAP4430_VOLRA_VDD_MPU_L_MASK,
@@ -58,7 +57,6 @@ struct omap_vc_channel omap4_vc_mpu = {
struct omap_vc_channel omap4_vc_iva = {
.common = &omap4_vc_common,
.cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_IVA_L_OFFSET,
- .smps_sa_shift = OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_SHIFT,
.smps_sa_mask = OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_MASK,
.smps_volra_shift = OMAP4430_VOLRA_VDD_IVA_L_SHIFT,
.smps_volra_mask = OMAP4430_VOLRA_VDD_IVA_L_MASK,
@@ -67,7 +65,6 @@ struct omap_vc_channel omap4_vc_iva = {
struct omap_vc_channel omap4_vc_core = {
.common = &omap4_vc_common,
.cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_CORE_L_OFFSET,
- .smps_sa_shift = OMAP4430_SA_VDD_CORE_L_0_6_SHIFT,
.smps_sa_mask = OMAP4430_SA_VDD_CORE_L_0_6_MASK,
.smps_volra_shift = OMAP4430_VOLRA_VDD_CORE_L_SHIFT,
.smps_volra_mask = OMAP4430_VOLRA_VDD_CORE_L_MASK,
diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h
index f4198aa..639e85c 100644
--- a/arch/arm/mach-omap2/voltage.h
+++ b/arch/arm/mach-omap2/voltage.h
@@ -110,13 +110,13 @@ struct omap_volt_pmic_info {
u32 ret_volt;
u32 off_volt;
u16 volt_setup_time;
+ u16 i2c_slave_addr;
u8 vp_erroroffset;
u8 vp_vstepmin;
u8 vp_vstepmax;
u8 vp_vddmin;
u8 vp_vddmax;
u8 vp_timeout_us;
- u8 i2c_slave_addr;
u8 volt_reg_addr;
u8 cmd_reg_addr;
unsigned long (*vsel_to_uv) (const u8 vsel);
--
1.7.6
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
