Hi On Wed, Aug 31, 2011 at 4:28 AM, Hilman, Kevin wrote: > > Abhilash K V <abhilash...@ti.com> writes: > >> 1. Patch to disable dynamic sleep (as it is not supported >> on AM35xx). >> 2. Imported the unique suspend/resume sequence for AM3517, >> contained in the new file arch/arm/mach-omap2/sleep3517.S. >> 3. Added omap3517_ to symbol-names in sleep3517.S which are common >> with sleep34xx.S, and added appropriate checks. >> >> There are still 3 caveats: >> >> 1. If "no_console_suspend" is enabled (via boot-args), the device >> doesnot resume but simply hangs. >> 2. Every second and subsequent attempt to suspend/resume prints this >> slow-path >> WARNING (for both uart1 and uart2), while resuming : >> [ 70.943939] omap_hwmod: uart1: idle state can only be entered from >> enabled state >> 3. Wakeup using the TSC2004 touch-screen controller is not supported. >> >> Signed-off-by: Ranjith Lohithakshan <ranji...@ti.com> >> Reviewed-by: Vaibhav Hiremath <hvaib...@ti.com> >> Signed-off-by: Abhilash K V <abhilash...@ti.com> > > In addition to Russell's comments about using the latest code from > mainline, I have some comments below. [Abhilash K V] I have reworked the patch against the tip (as suggested by Russell). And I've incorporated all of Kevin's comments too. There is one "known" issue left which needs to be closed before I can submit v2 of this patch. With no_console_suspend, suspend to RAM hangs right now on AM3517, after the message: Disabling non-boot CPUs ... There is no error message or dump. I found that this crash is happening in a call to pr_warning(), from _omap_device_deactivate(). The same code does not produce this issue on omap34xx due to this snippet from omap_sram_idle() : /* PER */ if (per_next_state < PWRDM_POWER_ON) { per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0; omap_uart_prepare_idle(2); omap_uart_prepare_idle(3); omap2_gpio_prepare_for_idle(per_going_off); if (per_next_state == PWRDM_POWER_OFF) omap3_per_save_context(); } /* CORE */ if (core_next_state < PWRDM_POWER_ON) { omap_uart_prepare_idle(0); omap_uart_prepare_idle(1); if (core_next_state == PWRDM_POWER_OFF) { omap3_core_save_context(); omap3_cm_save_context(); } } This happens in preparation to the suspend operation (I,e. the WFI). As seen here, on 34xx the sequence in which the uarts are disabled is 2, 3, 0 and 1.The console-uart, which is uart-1 here (starting from uart-0) is disabled last. For AM3517 EVM, the console-uart is uart-2 and this ought to be disabled at the last to prevent this crash from occurring. So my suggestion is to use a console_uart flag to store the appropriate uart no. for that platform rather than hard-code it and to ensure that this uart is disabled at the last.
Another point that complicates matters is that uart-1 and uart-2 are in different power domains (CORE and PER respectively) - so that would amount to using the console-uart no. to decide whether CORE or PER power-domains are disabled first. Would this have any side-effects? Is there a better way to go? -Abhilash > > >> --- >> arch/arm/mach-omap2/Makefile | 2 +- >> arch/arm/mach-omap2/control.c | 7 ++- >> arch/arm/mach-omap2/control.h | 1 + >> arch/arm/mach-omap2/pm.h | 4 + >> arch/arm/mach-omap2/pm34xx.c | 18 ++++- >> arch/arm/mach-omap2/sleep3517.S | 144 >> +++++++++++++++++++++++++++++++++++++++ >> 6 files changed, 170 insertions(+), 6 deletions(-) >> create mode 100644 arch/arm/mach-omap2/sleep3517.S >> >> diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile >> index 46f5fbc..3fdf086 100644 >> --- a/arch/arm/mach-omap2/Makefile >> +++ b/arch/arm/mach-omap2/Makefile >> @@ -61,7 +61,7 @@ endif >> ifeq ($(CONFIG_PM),y) >> obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o >> obj-$(CONFIG_ARCH_OMAP2) += sleep24xx.o >> -obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o \ >> +obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o sleep3517.o \ >> cpuidle34xx.o >> obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o >> obj-$(CONFIG_PM_DEBUG) += pm-debug.o >> diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c >> index da53ba3..7d2d8a8 100644 >> --- a/arch/arm/mach-omap2/control.c >> +++ b/arch/arm/mach-omap2/control.c >> @@ -284,10 +284,13 @@ void omap3_save_scratchpad_contents(void) >> * The restore pointer is stored into the scratchpad. >> */ >> scratchpad_contents.boot_config_ptr = 0x0; >> - if (cpu_is_omap3630()) >> + if (cpu_is_omap3505() || cpu_is_omap3517()) { >> + scratchpad_contents.public_restore_ptr = >> + virt_to_phys(omap3517_get_restore_pointer()); > > Based on the contents of the get_restore_pointer() added below, this > value is obviously not being used. Either off-mode was not tested (or not > supported.) Either way, unused code like this should not be > added if it is not tested or supported. > >> + } else if (cpu_is_omap3630()) { >> scratchpad_contents.public_restore_ptr = >> virt_to_phys(get_omap3630_restore_pointer()); >> - else if (omap_rev() != OMAP3430_REV_ES3_0 && >> + } else if (omap_rev() != OMAP3430_REV_ES3_0 && >> omap_rev() != OMAP3430_REV_ES3_1) >> scratchpad_contents.public_restore_ptr = >> virt_to_phys(get_restore_pointer()); >> diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h >> index ad024df..3003940 100644 >> --- a/arch/arm/mach-omap2/control.h >> +++ b/arch/arm/mach-omap2/control.h >> @@ -389,6 +389,7 @@ extern void omap4_ctrl_pad_writel(u32 val, u16 offset); >> extern void omap3_save_scratchpad_contents(void); >> extern void omap3_clear_scratchpad_contents(void); >> extern u32 *get_restore_pointer(void); >> +extern u32 *omap3517_get_restore_pointer(void); >> extern u32 *get_es3_restore_pointer(void); >> extern u32 *get_omap3630_restore_pointer(void); >> extern u32 omap3_arm_context[128]; >> diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h >> index 5c2bd2f..d773e07 100644 >> --- a/arch/arm/mach-omap2/pm.h >> +++ b/arch/arm/mach-omap2/pm.h >> @@ -77,13 +77,17 @@ extern void omap24xx_idle_loop_suspend(void); >> extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl, >> void __iomem *sdrc_power); >> extern void omap34xx_cpu_suspend(u32 *addr, int save_state); >> +extern void omap3517_cpu_suspend(u32 *addr, int save_state); >> extern int save_secure_ram_context(u32 *addr); >> +extern void omap3517_save_secure_ram_context(u32 *addr); >> extern void omap3_save_scratchpad_contents(void); >> >> extern unsigned int omap24xx_idle_loop_suspend_sz; >> extern unsigned int save_secure_ram_context_sz; >> +extern unsigned int omap3517_save_secure_ram_context_sz; >> extern unsigned int omap24xx_cpu_suspend_sz; >> extern unsigned int omap34xx_cpu_suspend_sz; >> +extern unsigned int omap3517_cpu_suspend_sz; >> >> #define PM_RTA_ERRATUM_i608 (1 << 0) >> #define PM_SDRC_WAKEUP_ERRATUM_i583 (1 << 1) >> diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c >> index 96a7624..12af5b9 100644 >> --- a/arch/arm/mach-omap2/pm34xx.c >> +++ b/arch/arm/mach-omap2/pm34xx.c >> @@ -497,6 +497,8 @@ console_still_active: >> >> int omap3_can_sleep(void) >> { >> + if (cpu_is_omap3505() || cpu_is_omap3517()) >> + return 0; >> if (!omap_uart_can_sleep()) >> return 0; >> return 1; >> @@ -848,11 +850,21 @@ static int __init clkdms_setup(struct clockdomain >> *clkdm, void *unused) >> >> void omap_push_sram_idle(void) >> { >> - _omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend, >> + if (cpu_is_omap3505() || cpu_is_omap3517()) >> + _omap_sram_idle = omap_sram_push(omap3517_cpu_suspend, >> + omap3517_cpu_suspend_sz); >> + else >> + _omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend, >> omap34xx_cpu_suspend_sz); >> if (omap_type() != OMAP2_DEVICE_TYPE_GP) >> - _omap_save_secure_sram = >> omap_sram_push(save_secure_ram_context, >> - save_secure_ram_context_sz); >> + if (cpu_is_omap3505() || cpu_is_omap3517()) >> + _omap_save_secure_sram = omap_sram_push( >> + omap3517_save_secure_ram_context, >> + omap3517_save_secure_ram_context_sz); >> + else >> + _omap_save_secure_sram = omap_sram_push( >> + save_secure_ram_context, >> + save_secure_ram_context_sz); >> } > > You add a new assembly function for save secure context, but that > function is essentially a nop. > > It would be better to just not have a function for these devices. > > To that end, it would help to add an OMAP "feature" stating whether or > not the device has secure RAM. Then, instead of the cpu_is_* checks > here, that feature flag can be checked. > >> >> static void __init pm_errata_configure(void) >> diff --git a/arch/arm/mach-omap2/sleep3517.S >> b/arch/arm/mach-omap2/sleep3517.S >> new file mode 100644 >> index 0000000..3fceefc >> --- /dev/null >> +++ b/arch/arm/mach-omap2/sleep3517.S >> @@ -0,0 +1,144 @@ >> +/* >> +/* linux/arch/arm/mach-omap2/sleep3517.S > > You can leave out filenames in comments. Files tend to move, and the > comments don't get changed and become stale. > > Kevin -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html