Hi,

Attach the patch [PATCH v5 2/7] which is rebased on 3.1 -next.

BTW: The [PATCH v5 3/7] should be dropped as commented before, other patches
are OK against 3.1 -next.

thanks,
--
Ming Lei

--
>From 6125bef1aeee84ef22efdf743077f27f5274b6da Mon Sep 17 00:00:00 2001
From: Ming Lei <ming....@canonical.com>
Date: Wed, 2 Mar 2011 15:00:08 +0800
Subject: [PATCH v6 2/6] arm: pmu: allow platform specific irq enable/disable
 handling

This patch introduces .enable_irq and .disable_irq into
struct arm_pmu_platdata, so platform specific irq enablement
can be handled after request_irq, and platform specific irq
disablement can be handled before free_irq.

This patch is for support of  pmu irq routed from CTI on omap4.

Acked-by: Jean Pihet <j-pi...@ti.com>
Reviewed-by: Will Deacon <will.dea...@arm.com>
Signed-off-by: Ming Lei <ming....@canonical.com>
---
 arch/arm/include/asm/pmu.h   |   15 ++++++++++++---
 arch/arm/kernel/perf_event.c |   10 ++++++++--
 2 files changed, 20 insertions(+), 5 deletions(-)

diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h
index 71d99b8..46a96a8 100644
--- a/arch/arm/include/asm/pmu.h
+++ b/arch/arm/include/asm/pmu.h
@@ -27,13 +27,22 @@ enum arm_pmu_type {
 /*
  * struct arm_pmu_platdata - ARM PMU platform data
  *
- * @handle_irq: an optional handler which will be called from the interrupt and
- * passed the address of the low level handler, and can be used to implement
- * any platform specific handling before or after calling it.
+ * @handle_irq: an optional handler which will be called from the
+ *     interrupt and passed the address of the low level handler,
+ *     and can be used to implement any platform specific handling
+ *     before or after calling it.
+ * @enable_irq: an optional handler which will be called after
+ *     request_irq and be used to handle some platform specific
+ *     irq enablement
+ * @disable_irq: an optional handler which will be called before
+ *     free_irq and be used to handle some platform specific
+ *     irq disablement
  */
 struct arm_pmu_platdata {
        irqreturn_t (*handle_irq)(int irq, void *dev,
                                  irq_handler_t pmu_handler);
+       void (*enable_irq)(int irq);
+       void (*disable_irq)(int irq);
 };
 
 #ifdef CONFIG_CPU_HAS_PMU
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index e6e5d7c..4c4aa83 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -374,6 +374,8 @@ armpmu_release_hardware(struct arm_pmu *armpmu)
 {
        int i, irq, irqs;
        struct platform_device *pmu_device = armpmu->plat_device;
+       struct arm_pmu_platdata *plat =
+               dev_get_platdata(&pmu_device->dev);
 
        irqs = min(pmu_device->num_resources, num_possible_cpus());
 
@@ -381,8 +383,11 @@ armpmu_release_hardware(struct arm_pmu *armpmu)
                if (!cpumask_test_and_clear_cpu(i, &armpmu->active_irqs))
                        continue;
                irq = platform_get_irq(pmu_device, i);
-               if (irq >= 0)
+               if (irq >= 0) {
+                       if (plat && plat->disable_irq)
+                               plat->disable_irq(irq);
                        free_irq(irq, armpmu);
+               }
        }
 
        release_pmu(armpmu->type);
@@ -439,7 +444,8 @@ armpmu_reserve_hardware(struct arm_pmu *armpmu)
                                irq);
                        armpmu_release_hardware(armpmu);
                        return err;
-               }
+               } else if (plat && plat->enable_irq)
+                       plat->enable_irq(irq);
 
                cpumask_set_cpu(i, &armpmu->active_irqs);
        }
-- 
1.7.5.4





-- 
Ming Lei
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to