Count of selector voltage is required for regulator_set_voltage
to work via set_voltage_sel. VDD1/2 currently have it as zero,
so regulator_set_voltage won't work for VDD1/2
Update count (n_voltages) for VDD1/2
Signed-off-by: Afzal Mohammed <af...@ti.com>
---
drivers/regulator/tps65910-regulator.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/drivers/regulator/tps65910-regulator.c
b/drivers/regulator/tps65910-regulator.c
index a620e25..81f629f 100644
--- a/drivers/regulator/tps65910-regulator.c
+++ b/drivers/regulator/tps65910-regulator.c
@@ -930,6 +930,7 @@ static __devinit int tps65910_probe(struct platform_device
*pdev)
if (i == TPS65910_REG_VDD1 || i == TPS65910_REG_VDD2) {
pmic->desc[i].ops = &tps65910_ops_dcdc;
+ pmic->desc[i].n_voltages = VDD1_2_NUM_VOLTS * 3;
} else if (i == TPS65910_REG_VDD3) {
if (tps65910_chip_id(tps65910) == TPS65910)
pmic->desc[i].ops = &tps65910_ops_vdd3;
--
1.6.2.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
