Hi,
On Wed, 9 Nov 2011, Tony Lindgren wrote:
* Aaro Koskinen <aaro.koski...@iki.fi> [111109 15:25]:
On 10.11.2011, at 1.39, Russell King - ARM Linux wrote:
On Wed, Nov 09, 2011 at 03:25:25PM -0800, Tony Lindgren wrote:
Commit 7b88e62f5d219a86d81bdf4388012c97dc42e8f8 (ARM: OMAP1: Use
generic
map_io, init_early and init_irq) changed omap1 to use generic map_io.
Looks like I missed one board though. Fix this by adding a custom
map_io for Amstrad E3.
Reported-by: Aaro Koskinen <aaro.koski...@iki.fi>
Signed-off-by: Tony Lindgren <t...@atomide.com>
---
Untested, does this help?
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -302,8 +302,6 @@ static void __init ams_delta_init(void)
omap_cfg_reg(J19_1610_CAM_D6);
omap_cfg_reg(J18_1610_CAM_D7);
- iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
-
This is definitely wrong. Using iotable_init() after map_io has
returned
has (and remains) a serious bug - doing so may _appear_ to work
but as it
doesn't obtain its memory from the standard kernel memory
allocators, it
will lead to duplicate usage of that memory.
Also, the patch did not help. It still hangs like before.
Hmm that patch is needed for sure but sounds like there's also
something else wrong.. Can you try to git bisect it?
I found it impossible to bisect, but there are two issues I found:
1) earlyconsole turns into garbage in omap1_clk_init() unless I do
the following:
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
index 92400b9..b9ce2ad 100644
--- a/arch/arm/mach-omap1/clock_data.c
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -774,14 +774,6 @@ int __init omap1_clk_init(void)
int crystal_type = 0; /* Default 12 MHz */
u32 reg, cpu_mask;
-#ifdef CONFIG_DEBUG_LL
- /*
- * Resets some clocks that may be left on from bootloader,
- * but leaves serial clocks on.
- */
- omap_writel(0x3 << 29, MOD_CONF_CTRL_0);
-#endif
-
/* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */
reg = omap_readw(SOFT_REQ_REG) & (1 << 4);
omap_writew(reg, SOFT_REQ_REG);
2) By using the above hack, I could see the actual crash:
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-rc1-e3 (aaro@dell) (gcc version 4.6.1 (GCC)
) #9 PREEMPT Thu Nov 10 23:48:23 EET 2011
[ 0.000000] CPU: ARM925T [54029252] revision 2 (ARMv4T), cr=0000317f
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: Amstrad E3 (Delta)
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] Memory policy: ECC disabled, Data cache writethrough
[ 0.000000] OMAP1510
[ 0.000000] revision 2 handled as 15xx id: bc058c9b93111a16
[ 0.000000] Clocks: ARM_SYSST: 0x1000 DPLL_CTL: 0x2cb3 ARM_CKCTL: 0x250e
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] kernel BUG at arch/arm/plat-omap/sram.c:226!
[ 0.000000] Internal error: Oops - undefined instruction: 0 [#1] PREEMPT
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 Not tainted (3.2.0-rc1-e3 #9)
[ 0.000000] PC is at omap_sram_reprogram_clock+0x28/0x30
[ 0.000000] LR is at omap1_select_table_rate+0x88/0xb4
[ 0.000000] pc : [<c001b0c4>] lr : [<c0019f54>] psr: 600000d3
[ 0.000000] sp : c035bf10 ip : c035bf20 fp : c035bf1c
[ 0.000000] r10: c035bfd4 r9 : 54029252 r8 : c03f8120
[ 0.000000] r7 : c0362b50 r6 : 00b71b00 r5 : c03873cc r4 : c0362b40
[ 0.000000] r3 : 00000000 r2 : c0362b40 r1 : 0000010a r0 : 00002cb0
[ 0.000000] Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment
kernel
[ 0.000000] Control: 0000317f Table: 10004000 DAC: 00000017
[ 0.000000] Process swapper (pid: 0, stack limit = 0xc035a270)
[ 0.000000] Stack: (0xc035bf10 to 0xc035c000)
[ 0.000000] bf00: c035bf3c c035bf20
c0019f54 c001b0ac
[ 0.000000] bf20: 00001000 00002cb3 00000004 c035ed4c c035bf74 c035bf40
c033ea24 c0019edc
[ 0.000000] bf40: c02f526c 00000002 00000015 bc058c9b 93111a16 c035335c
02000000 c035ed4c
[ 0.000000] bf60: c035ed4c c03f8120 c035bf84 c035bf78 c00194c4 c033e8ec
c035bfc4 c035bf88
[ 0.000000] bf80: c033bc24 c00194a0 c035bf90 c035bf98 00000000 00000000
00000000 00000000
[ 0.000000] bfa0: 00000001 00000000 c0354678 c035ece4 10004000 103532f4
c035bff4 c035bfc8
[ 0.000000] bfc0: c0338574 c033b598 00000000 00000000 00000000 c035467c
0000317d c035c03c
[ 0.000000] bfe0: c0354678 c035ece4 00000000 c035bff8 10008040 c0338508
00000000 00000000
[ 0.000000] Backtrace:
[ 0.000000] [<c001b09c>] (omap_sram_reprogram_clock+0x0/0x30) from
[<c0019f54>] (omap1_select_table_rate+0x88/0xb4)
[ 0.000000] [<c0019ecc>] (omap1_select_table_rate+0x0/0xb4) from
[<c033ea24>] (omap1_clk_init+0x148/0x334)
[ 0.000000] r7:c035ed4c r6:00000004 r5:00002cb3 r4:00001000
[ 0.000000] [<c033e8dc>] (omap1_clk_init+0x0/0x334) from [<c00194c4>]
(omap1_init_early+0x34/0x48)
[ 0.000000] r8:c03f8120 r7:c035ed4c r6:c035ed4c r5:02000000 r4:c035335c
[ 0.000000] [<c0019490>] (omap1_init_early+0x0/0x48) from [<c033bc24>]
(setup_arch+0x69c/0x79c)
[ 0.000000] [<c033b588>] (setup_arch+0x0/0x79c) from [<c0338574>]
(start_kernel+0x7c/0x2f4)
[ 0.000000] [<c03384f8>] (start_kernel+0x0/0x2f4) from [<10008040>]
(0x10008040)
[ 0.000000] r7:c035ece4 r6:c0354678 r5:c035c03c r4:0000317d
[ 0.000000] Code: 0a000002 e1a0e00f e12fff13 e89da800 (e7f001f2)
[ 0.000000] ---[ end trace 1b75b31a2719ed1c ]---
The BUG_ON() in omap_sram_reprogram_clock() triggers, because
it's called before omap_sram_init(). If I comment out the code in
omap_sram_reprogram_clock(), the board boots up.
A.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
