Hi Govindraj,
On 10/18/2011 10:26, Govindraj.R wrote:
Move the errata handling mechanism from serial.c to omap-serial file
and utilise the same func in driver file.
Errata i202, i291 are moved to be handled with omap-serial
Moving the errata macro from serial.c file to driver header file
as from on errata will be handled in driver file itself.
Corrected errata id from chapter reference 2.15 to errata id i291.
Removed errata and dma_enabled feilds from omap_uart_state struct
as they are no more needed with errata handling done within omap-serial.
Acked-by: Alan Cox<a...@linux.intel.com>
Signed-off-by: Govindraj.R<govindraj.r...@ti.com>
---
arch/arm/mach-omap2/serial.c | 97 +++++++------------------
arch/arm/plat-omap/include/plat/omap-serial.h | 6 ++
drivers/tty/serial/omap-serial.c | 66 ++++++++++++++++-
3 files changed, 95 insertions(+), 74 deletions(-)
[snip]
+ /* Enable the MDR1 errata for OMAP3 */
+ if (cpu_is_omap34xx()&& !cpu_is_ti816x())
+ omap_up.errata |= UART_ERRATA_i202_MDR1_ACCESS;
This errata (i202) is applicable to all devices from OMAP2430 to
OMAP4460 (apparently this one is not getting fixed). So could you make
sure this is enabled for 2430, 3430, 3630, 4430 and 4460?
[snip]
+/*
+ * Work Around for Errata i202 (3430 - 1.12, 3630 - 1.6)
We should update the comment to be "Work Around for Errata i202 (2430,
3430, 3630, 4430 and 4460)". The "1.12" and "1.6" are just the section
references in the errata docs, but I think that you can drop these as
you can just search for the errata ID which is i202.
Cheers
Jon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
