On Wed, 2011-11-09 at 01:12 +0100, Ilya Yanok wrote:
> Add data for the FocalTech ETM070003DH6 display to the generic_dpi_panel
> display driver.
>
> Signed-off-by: Ilya Yanok <ya...@emcraft.com>
> ---
> drivers/video/omap2/displays/panel-generic-dpi.c | 24
> ++++++++++++++++++++++
> 1 files changed, 24 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/video/omap2/displays/panel-generic-dpi.c
> b/drivers/video/omap2/displays/panel-generic-dpi.c
> index 519c47d..42bfe47 100644
> --- a/drivers/video/omap2/displays/panel-generic-dpi.c
> +++ b/drivers/video/omap2/displays/panel-generic-dpi.c
> @@ -297,6 +297,30 @@ static struct panel_config generic_dpi_panels[] = {
>
> .name = "apollon",
> },
> + /* FocalTech ETM070003DH6 */
> + {
> + {
> + .x_res = 800,
> + .y_res = 480,
> +
> + .pixel_clock = 28000,
> +
> + .hsw = 48,
> + .hfp = 40,
> + .hbp = 40,
> +
> + .vsw = 3,
> + .vfp = 13,
> + .vbp = 29,
> + },
> + .acbi = 0x0,
> + .acb = 0x28,You could just remove .acbi and .acb, I don't think they are needed. > + .config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS | > + OMAP_DSS_LCD_IHS, > + .power_on_delay = 50, > + .power_off_delay = 100, Did you check from the panel spec if any delays are needed? These look like just copied from the Sharp panel data. Tomi
signature.asc
Description: This is a digitally signed message part
