"Hiremath, Vaibhav" <hvaib...@ti.com> writes: >> Vaibhav Hiremath <hvaib...@ti.com> writes: >> >> > From: Afzal Mohammed <af...@ti.com> >> > >> > Add support for low level debugging on AM335X EVM (AM33XX family). >> > Currently only support for UART1 console, which is used on AM335X EVM >> > is added. >> > >> > Signed-off-by: Afzal Mohammed <af...@ti.com> >> > Signed-off-by: Vaibhav Hiremath <hvaib...@ti.com> >> >> One minor comment below... >> >> > --- >> > arch/arm/mach-omap2/include/mach/debug-macro.S | 17 ++++++++++++++++- >> > arch/arm/plat-omap/include/plat/serial.h | 4 ++++ >> > arch/arm/plat-omap/include/plat/uncompress.h | 6 ++++++ >> > 3 files changed, 26 insertions(+), 1 deletions(-) >> > >> > diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S >> b/arch/arm/mach-omap2/include/mach/debug-macro.S >> > index 13f98e5..ce543ae 100644 >> > --- a/arch/arm/mach-omap2/include/mach/debug-macro.S >> > +++ b/arch/arm/mach-omap2/include/mach/debug-macro.S >> > @@ -72,6 +72,8 @@ omap_uart_lsr: .word 0 >> > beq 82f @ configure UART2 >> > cmp \rp, #TI816XUART3 @ ti816x UART offsets different >> > beq 83f @ configure UART3 >> > + cmp \rp, #AM33XXUART1 @ AM33XX UART offsets different >> > + beq 84f @ configure UART1 >> > cmp \rp, #ZOOM_UART @ only on zoom2/3 >> > beq 95f @ configure ZOOM_UART >> > >> > @@ -100,7 +102,9 @@ omap_uart_lsr: .word 0 >> > b 98f >> > 83: mov \rp, #UART_OFFSET(TI816X_UART3_BASE) >> > b 98f >> > - >> > +84: ldr \rp, =AM33XX_UART1_BASE >> > + and \rp, \rp, #0x00ffffff >> > + b 97f >> > 95: ldr \rp, =ZOOM_UART_BASE >> > str \rp, [\tmp, #0] @ omap_uart_phys >> > ldr \rp, =ZOOM_UART_VIRT >> > @@ -110,6 +114,17 @@ omap_uart_lsr: .word 0 >> > b 10b >> > >> > /* Store both phys and virt address for the uart */ >> >> Please update this comment to clarify that this block is for AM33xx >> only, and update the following one as the catch all. >> > Ok, will update. > >> > +97: add \rp, \rp, #0x44000000 @ phys base >> > + str \rp, [\tmp, #0] @ omap_uart_phys >> > + sub \rp, \rp, #0x44000000 @ phys base >> > + add \rp, \rp, #0xf9000000 @ virt base >> > + str \rp, [\tmp, #4] @ omap_uart_virt >> > + mov \rp, #(UART_LSR << OMAP_PORT_SHIFT) >> > + str \rp, [\tmp, #8] @ omap_uart_lsr >> >> The last 3 lines are unnecessarily duplicated. They can be shared with >> the common block that follows. IOW, only the base addresses are >> different, the rest of the operations are shared. >> > I thought about this, but then code looks complex & ugly, just to save > duplication of 3 lines. So I added separate code for AM33xx devices.
Yeah, you're right. Your original version is better. Please just update the comments around the 2 blocks then. Thanks, Kevin -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
