On Wed, Feb 15, 2012 at 01:34:46PM -0600, Rob Herring wrote:
> On 02/15/2012 11:37 AM, Benoit Cousson wrote:
> > Add device tree support to the OMAP2+ McSPI driver.
> > Add the bindings documentation.
> >
> > Based on original code from Rajendra.
> >
> > Signed-off-by: Benoit Cousson <b-cous...@ti.com>
> > Cc: Grant Likely <grant.lik...@secretlab.ca>
> > Cc: Rajendra Nayak <rna...@ti.com>
> > ---
> > Documentation/devicetree/bindings/spi/omap-spi.txt | 20 +++++++
> > drivers/spi/spi-omap2-mcspi.c | 56
> > +++++++++++++++++---
> > 2 files changed, 68 insertions(+), 8 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/spi/omap-spi.txt
> >
> > diff --git a/Documentation/devicetree/bindings/spi/omap-spi.txt
> > b/Documentation/devicetree/bindings/spi/omap-spi.txt
> > new file mode 100644
> > index 0000000..81df374
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/spi/omap-spi.txt
> > @@ -0,0 +1,20 @@
> > +OMAP2+ McSPI device
> > +
> > +Required properties:
> > +- compatible :
> > + - "ti,omap2-spi" for OMAP2 & OMAP3.
> > + - "ti,omap4-spi" for OMAP4+.
> > +- ti,spi-num-cs : Number of chipselect supported by the instance.
> > +- ti,hwmods: Name of the hwmod associated to the McSPI
> > +
> > +
> > +Example:
> > +
> > +mcspi1: mcspi@1 {
>
> I don't recall if there's a generic name defined but just "spi" would
> probably be better. Also, shouldn't this be the base address?
>
> Otherwise, for the series:
>
> Acked-by: Rob Herring <rob.herr...@calxeda.com>
Yes, use the generic names recommended practice and name the node spi@<address>.
g.
>
>
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + compatible = "ti,omap4-mcspi";
> > + ti,hwmods = "mcspi1";
> > + ti,spi-num-cs = <4>;
> > +};
> > +
> > diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
> > index 0b0dfb7..bb9274c 100644
> > --- a/drivers/spi/spi-omap2-mcspi.c
> > +++ b/drivers/spi/spi-omap2-mcspi.c
> > @@ -34,6 +34,8 @@
> > #include <linux/io.h>
> > #include <linux/slab.h>
> > #include <linux/pm_runtime.h>
> > +#include <linux/of.h>
> > +#include <linux/of_device.h>
> >
> > #include <linux/spi/spi.h>
> >
> > @@ -1079,15 +1081,39 @@ static int omap_mcspi_runtime_resume(struct device
> > *dev)
> > return 0;
> > }
> >
> > +static struct omap2_mcspi_platform_config omap2_pdata = {
> > + .regs_offset = 0,
> > +};
> > +
> > +static struct omap2_mcspi_platform_config omap4_pdata = {
> > + .regs_offset = OMAP4_MCSPI_REG_OFFSET,
> > +};
> > +
> > +static const struct of_device_id omap_mcspi_of_match[] = {
> > + {
> > + .compatible = "ti,omap2-mcspi",
> > + .data = &omap2_pdata,
> > + },
> > + {
> > + .compatible = "ti,omap4-mcspi",
> > + .data = &omap4_pdata,
> > + },
> > + { },
> > +};
> > +MODULE_DEVICE_TABLE(of, omap_mcspi_of_match);
> >
> > static int __init omap2_mcspi_probe(struct platform_device *pdev)
> > {
> > struct spi_master *master;
> > - struct omap2_mcspi_platform_config *pdata = pdev->dev.platform_data;
> > + struct omap2_mcspi_platform_config *pdata;
> > struct omap2_mcspi *mcspi;
> > struct resource *r;
> > int status = 0, i;
> > char wq_name[20];
> > + u32 regs_offset = 0;
> > + static int bus_num = 1;
> > + struct device_node *node = pdev->dev.of_node;
> > + const struct of_device_id *match;
> >
> > master = spi_alloc_master(&pdev->dev, sizeof *mcspi);
> > if (master == NULL) {
> > @@ -1098,13 +1124,26 @@ static int __init omap2_mcspi_probe(struct
> > platform_device *pdev)
> > /* the spi->mode bits understood by this driver: */
> > master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
> >
> > - if (pdev->id != -1)
> > - master->bus_num = pdev->id;
> > -
> > master->setup = omap2_mcspi_setup;
> > master->transfer = omap2_mcspi_transfer;
> > master->cleanup = omap2_mcspi_cleanup;
> > - master->num_chipselect = pdata->num_cs;
> > + master->dev.of_node = node;
> > +
> > + match = of_match_device(omap_mcspi_of_match, &pdev->dev);
> > + if (match) {
> > + u32 num_cs = 1; /* default number of chipselect */
> > + pdata = match->data;
> > +
> > + of_property_read_u32(node, "ti,spi-num-cs", &num_cs);
> > + master->num_chipselect = num_cs;
> > + master->bus_num = bus_num++;
> > + } else {
> > + pdata = pdev->dev.platform_data;
> > + master->num_chipselect = pdata->num_cs;
> > + if (pdev->id != -1)
> > + master->bus_num = pdev->id;
> > + }
> > + regs_offset = pdata->regs_offset;
> >
> > dev_set_drvdata(&pdev->dev, master);
> >
> > @@ -1124,8 +1163,8 @@ static int __init omap2_mcspi_probe(struct
> > platform_device *pdev)
> > goto free_master;
> > }
> >
> > - r->start += pdata->regs_offset;
> > - r->end += pdata->regs_offset;
> > + r->start += regs_offset;
> > + r->end += regs_offset;
> > mcspi->phys = r->start;
> > if (!request_mem_region(r->start, resource_size(r),
> > dev_name(&pdev->dev))) {
> > @@ -1285,7 +1324,8 @@ static struct platform_driver omap2_mcspi_driver = {
> > .driver = {
> > .name = "omap2_mcspi",
> > .owner = THIS_MODULE,
> > - .pm = &omap2_mcspi_pm_ops
> > + .pm = &omap2_mcspi_pm_ops,
> > + .of_match_table = omap_mcspi_of_match,
> > },
> > .remove = __exit_p(omap2_mcspi_remove),
> > };
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
