Now that we have OPP layer, and OMAP CPUfreq driver is using it, we no
longer need/use the clock framework code for filling up CPUfreq
tables.  Remove it.

Thanks to Russell King for pointing out the parts I missed under
plat-omap in the original version.

Cc: Russell King <rmk+ker...@arm.linux.org.uk>
Signed-off-by: Kevin Hilman <khil...@ti.com>
---
Paul, this is an updated version of the previous one after a different
CPUfreq patch from Russell made me realize I missed the plat-omap pieces.

 arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c |   80 --------------------------
 arch/arm/mach-omap2/clock.c                  |    5 --
 arch/arm/mach-omap2/clock.h                  |    8 ---
 arch/arm/plat-omap/clock.c                   |   26 --------
 arch/arm/plat-omap/include/plat/clock.h      |   10 ---
 5 files changed, 0 insertions(+), 129 deletions(-)

diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c 
b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
index 39f9d5a..9a13e07 100644
--- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
+++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
@@ -164,83 +164,3 @@ int omap2_select_table_rate(struct clk *clk, unsigned long 
rate)
 
        return 0;
 }
-
-#ifdef CONFIG_CPU_FREQ
-/*
- * Walk PRCM rate table and fillout cpufreq freq_table
- * XXX This should be replaced by an OPP layer in the near future
- */
-static struct cpufreq_frequency_table *freq_table;
-
-void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
-{
-       const struct prcm_config *prcm;
-       int i = 0;
-       int tbl_sz = 0;
-
-       if (!cpu_is_omap24xx())
-               return;
-
-       for (prcm = rate_table; prcm->mpu_speed; prcm++) {
-               if (!(prcm->flags & cpu_mask))
-                       continue;
-               if (prcm->xtal_speed != sclk->rate)
-                       continue;
-
-               /* don't put bypass rates in table */
-               if (prcm->dpll_speed == prcm->xtal_speed)
-                       continue;
-
-               tbl_sz++;
-       }
-
-       /*
-        * XXX Ensure that we're doing what CPUFreq expects for this error
-        * case and the following one
-        */
-       if (tbl_sz == 0) {
-               pr_warning("%s: no matching entries in rate_table\n",
-                          __func__);
-               return;
-       }
-
-       /* Include the CPUFREQ_TABLE_END terminator entry */
-       tbl_sz++;
-
-       freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) * tbl_sz,
-                            GFP_ATOMIC);
-       if (!freq_table) {
-               pr_err("%s: could not kzalloc frequency table\n", __func__);
-               return;
-       }
-
-       for (prcm = rate_table; prcm->mpu_speed; prcm++) {
-               if (!(prcm->flags & cpu_mask))
-                       continue;
-               if (prcm->xtal_speed != sclk->rate)
-                       continue;
-
-               /* don't put bypass rates in table */
-               if (prcm->dpll_speed == prcm->xtal_speed)
-                       continue;
-
-               freq_table[i].index = i;
-               freq_table[i].frequency = prcm->mpu_speed / 1000;
-               i++;
-       }
-
-       freq_table[i].index = i;
-       freq_table[i].frequency = CPUFREQ_TABLE_END;
-
-       *table = &freq_table[0];
-}
-
-void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
-{
-       if (!cpu_is_omap24xx())
-               return;
-
-       kfree(freq_table);
-}
-
-#endif
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index f57ed5b..d9f4931 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -536,10 +536,5 @@ struct clk_functions omap2_clk_functions = {
        .clk_set_rate           = omap2_clk_set_rate,
        .clk_set_parent         = omap2_clk_set_parent,
        .clk_disable_unused     = omap2_clk_disable_unused,
-#ifdef CONFIG_CPU_FREQ
-       /* These will be removed when the OPP code is integrated */
-       .clk_init_cpufreq_table = omap2_clk_init_cpufreq_table,
-       .clk_exit_cpufreq_table = omap2_clk_exit_cpufreq_table,
-#endif
 };
 
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index b8c2a68..a1bb23a 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -146,14 +146,6 @@ extern const struct clksel_rate gpt_sys_rates[];
 extern const struct clksel_rate gfx_l3_rates[];
 extern const struct clksel_rate dsp_ick_rates[];
 
-#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_CPU_FREQ)
-extern void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table 
**table);
-extern void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table 
**table);
-#else
-#define omap2_clk_init_cpufreq_table   0
-#define omap2_clk_exit_cpufreq_table   0
-#endif
-
 extern const struct clkops clkops_omap2_iclk_dflt_wait;
 extern const struct clkops clkops_omap2_iclk_dflt;
 extern const struct clkops clkops_omap2_iclk_idle_only;
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 567e4b5..05a944b 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -399,32 +399,6 @@ struct clk dummy_ck = {
        .ops    = &clkops_null,
 };
 
-#ifdef CONFIG_CPU_FREQ
-void clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
-{
-       unsigned long flags;
-
-       if (!arch_clock || !arch_clock->clk_init_cpufreq_table)
-               return;
-
-       spin_lock_irqsave(&clockfw_lock, flags);
-       arch_clock->clk_init_cpufreq_table(table);
-       spin_unlock_irqrestore(&clockfw_lock, flags);
-}
-
-void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
-{
-       unsigned long flags;
-
-       if (!arch_clock || !arch_clock->clk_exit_cpufreq_table)
-               return;
-
-       spin_lock_irqsave(&clockfw_lock, flags);
-       arch_clock->clk_exit_cpufreq_table(table);
-       spin_unlock_irqrestore(&clockfw_lock, flags);
-}
-#endif
-
 /*
  *
  */
diff --git a/arch/arm/plat-omap/include/plat/clock.h 
b/arch/arm/plat-omap/include/plat/clock.h
index 240a7b9..d0ef57c 100644
--- a/arch/arm/plat-omap/include/plat/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -272,8 +272,6 @@ struct clk {
 #endif
 };
 
-struct cpufreq_frequency_table;
-
 struct clk_functions {
        int             (*clk_enable)(struct clk *clk);
        void            (*clk_disable)(struct clk *clk);
@@ -283,10 +281,6 @@ struct clk_functions {
        void            (*clk_allow_idle)(struct clk *clk);
        void            (*clk_deny_idle)(struct clk *clk);
        void            (*clk_disable_unused)(struct clk *clk);
-#ifdef CONFIG_CPU_FREQ
-       void            (*clk_init_cpufreq_table)(struct 
cpufreq_frequency_table **);
-       void            (*clk_exit_cpufreq_table)(struct 
cpufreq_frequency_table **);
-#endif
 };
 
 extern int mpurate;
@@ -301,10 +295,6 @@ extern void recalculate_root_clocks(void);
 extern unsigned long followparent_recalc(struct clk *clk);
 extern void clk_enable_init_clocks(void);
 unsigned long omap_fixed_divisor_recalc(struct clk *clk);
-#ifdef CONFIG_CPU_FREQ
-extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table);
-extern void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table);
-#endif
 extern struct clk *omap_clk_get_by_name(const char *name);
 extern int omap_clk_enable_autoidle_all(void);
 extern int omap_clk_disable_autoidle_all(void);
-- 
1.7.9

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to