Matt Porter <mpor...@ti.com> writes:
> This fixes smsc911x support on platforms using gpmc_smsc911x_init().
>
> Commit c7e963f6888816 (net/smsc911x: Add regulator support) added
> the requirement that platforms provide vdd33a and vddvario supplies.
>
> Signed-off-by: Matt Porter <mpor...@ti.com>
[...]
> /*
> * Initialize smsc911x device connected to the GPMC. Note that we
> * assume that pin multiplexing is done in the board-*.c file,
> @@ -55,6 +101,12 @@ void __init gpmc_smsc911x_init(struct
> omap_smsc911x_platform_data *board_data)
>
> gpmc_cfg = board_data;
>
> + ret = platform_device_register(&gpmc_smsc911x_regulator);
> + if (ret < 0) {
> + pr_err("Unable to register smsc911x regulators: %d\n", ret);
> + return;
> + }
> +
Boards that have more than one instance of the smsc911x (OMAP3/Overo)
barf here because of trying to register the same device twice.
We need something like the patch below to make Overo boot again.
Kevin
>From 4114dea2fb897ab75d05eaa943d29454034fc025 Mon Sep 17 00:00:00 2001
From: Kevin Hilman <khil...@ti.com>
Date: Thu, 1 Mar 2012 12:30:42 -0800
Subject: [PATCH] ARM: OMAP2+: gpmc-smsc911x: only register regulators once
commit e4b0b2cbbb (ARM: OMAP2+: gpmc-smsc911x: add required smsc911x
regulators) added regulators which are registered during
gpmc_smsc911x_init(). However, some platforms (OMAP3/Overo) have more
than one instance of the SMSC911x and result in attempting to register
the same regulator more than once which causes a panic(). Fix this by
tracking the regulator registration ensuring only a single device is
registered.
Cc: Matt Porter <mpor...@ti.com>
Signed-off-by: Kevin Hilman <khil...@ti.com>
---
arch/arm/mach-omap2/gpmc-smsc911x.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c
b/arch/arm/mach-omap2/gpmc-smsc911x.c
index bbb870c..95e6c7d 100644
--- a/arch/arm/mach-omap2/gpmc-smsc911x.c
+++ b/arch/arm/mach-omap2/gpmc-smsc911x.c
@@ -88,6 +88,8 @@ static struct platform_device gpmc_smsc911x_regulator = {
},
};
+static bool regulator_registered;
+
/*
* Initialize smsc911x device connected to the GPMC. Note that we
* assume that pin multiplexing is done in the board-*.c file,
@@ -101,10 +103,14 @@ void __init gpmc_smsc911x_init(struct
omap_smsc911x_platform_data *board_data)
gpmc_cfg = board_data;
- ret = platform_device_register(&gpmc_smsc911x_regulator);
- if (ret < 0) {
- pr_err("Unable to register smsc911x regulators: %d\n", ret);
- return;
+ if (!regulator_registered) {
+ ret = platform_device_register(&gpmc_smsc911x_regulator);
+ if (ret < 0) {
+ pr_err("Unable to register smsc911x regulators: %d\n",
+ ret);
+ return;
+ }
+ regulator_registered = true;
}
if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
--
1.7.9.2
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
