On Tue, Apr 10, 2012 at 5:51 PM, Shilimkar, Santosh <santosh.shilim...@ti.com> wrote: > On Tue, Apr 10, 2012 at 2:59 PM, Russell King - ARM Linux > <li...@arm.linux.org.uk> wrote: >> On Tue, Apr 10, 2012 at 02:27:36PM +0530, Santosh Shilimkar wrote: >>> On Tuesday 10 April 2012 02:14 PM, Russell King - ARM Linux wrote: >>> > On Mon, Apr 09, 2012 at 03:18:22PM -0500, Jon Hunter wrote: >>> >> True, but we would always want to use the 32k timer if CONFIG_PM is >>> >> specified. So what I am saying is that if a device has a 32ksync timer >>> >> and CONFIG_PM is defined, we always want to use the 32ksync timer and a >>> >> gptimer should never be used. >>> > >>> > Why? What if you want to have PM enabled, and you also want to use the >>> > kernels high resolution timers, or you want more accurate timing than >>> > the 30.5us tick interval of the 32k timer? >>> >>> You might have missed the earlier comments on the thread. High >>> resolution GP timer(sysclk) will stop in deeper power states and >>> hence it can't be used with PM enabled usecases. >> >> Which means folk should be given the choice at boot time between running >> with the deeper power states and having a higher resolution timing source, >> rather than denying them the higher resolution timing source when PM is >> enabled. > > Good point. My point is such facilities is already part of the kernel and > there is no need to add a new one. The last proposal was allowing user to > choose gptimer as a clocksource and then you already have facility to > disable C-state now so, all should work in general
'nohlt' in boot cmd should work to prevent CPU from entering deep C-state, which looks enough to make gptimer working well if system suspend isn't considered. Thanks, -- Ming Lei -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
