On Thu, 19 Apr 2012 20:00:12 +0530 "Raja, Govindraj" <govindraj.r...@ti.com> wrote:
> On Thu, Apr 19, 2012 at 12:38 AM, Alan Cox <a...@lxorguk.ukuu.org.uk> wrote: > >> The point is that wakeups should be enabled whenever driver is in use, > >> and disabled when the driver is not in use. > > > > > > Which is the tty_port methods for initialisation and shutdown, which are > > mutex protected against each other and hang up. > > > > Not sure how the uart layer glue exposes that. > > Is it okay to read the port flags to identify the port state in > driver whether the serial port shutdown ops is called from > port_suspend or due to port closure. > > Since port_shutdown gets called even from uart_suspend_port That sounds like someone needs to fix the uart code to avoid muddling up suspend/resume/open/close then, or at least pass the needed information down. Don't rely on port->flags ideally, they may well go away in part as they cease to be needed by the lock changes. Alan -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html