An overlay manager's timings (the manager size, and blanking parameters if an
LCD manager) are DISPC shadow registers, and they should hence follow the
correct programming model.
This set makes the timings an extra_info parameter in manager's private data .
The interface drivers now apply the timings in instead of directly writing to
registers.
This change also prevents the need to use display resolution for overlay
checks, hence making some of the APPLY functions less dependent on the display.
Changes since v2:
- Manager timings are represented as extra_info.
- The DISPC related cleanups are removed since they have already been taken.
These patches apply over:
git://gitorious.org/linux-omap-dss2/linux.git dev
Archit Taneja (4):
OMAPDSS: APPLY: Add manager timings as extra_info in private data
OMAPDSS: Apply manager timings instead of direct DISPC writes
OMAPDSS: MANAGER: Create a function to check manager timings
OMAPDSS: APPLY: Remove display dependency from overlay and manager
checks
drivers/video/omap2/dss/apply.c | 142 ++++++++++++++++++++++++++++++-------
drivers/video/omap2/dss/dpi.c | 4 +-
drivers/video/omap2/dss/dsi.c | 5 +-
drivers/video/omap2/dss/dss.h | 9 ++-
drivers/video/omap2/dss/hdmi.c | 2 +-
drivers/video/omap2/dss/manager.c | 19 +++++-
drivers/video/omap2/dss/overlay.c | 20 +++---
drivers/video/omap2/dss/rfbi.c | 4 +-
drivers/video/omap2/dss/sdi.c | 2 +-
drivers/video/omap2/dss/venc.c | 2 +-
10 files changed, 158 insertions(+), 51 deletions(-)
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
