EHCI PHY requires these regulators:
        EVM Rev >=E  --> VAUX2
        EVM Rev < E  --> VUSB1V5, VUSB1V8

Adding USB internal LDOs (vusb1v5 & vusb1v8) and VAUX2 to omap3evm
board file. Also removing vaux2_{1/2/3} supplies as they are not
used on omap3 evm.

But we need not to add vaux2 in twl4030_platform_data since it will
be added conditionally.

Signed-off-by: Ajay Kumar Gupta <ajay.gu...@ti.com>
Signed-off-by: Vaibhav Hiremath <hvaib...@ti.com>
Signed-off-by: Zumeng Chen <zumeng.c...@gmail.com>
---
 arch/arm/mach-omap2/board-omap3evm.c |   27 +++++++++++++++++++++++++++
 1 files changed, 27 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/board-omap3evm.c 
b/arch/arm/mach-omap2/board-omap3evm.c
index fef911d..7e5e18f 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -466,6 +466,30 @@ struct wl12xx_platform_data omap3evm_wlan_data __initdata 
= {
 };
 #endif
 
+/* VAUX2 for USB */
+static struct regulator_consumer_supply omap3evm_vaux2_supplies[] = {
+       REGULATOR_SUPPLY("VDD_CSIPHY1", "omap3isp"),    /* OMAP ISP */
+       REGULATOR_SUPPLY("VDD_CSIPHY2", "omap3isp"),    /* OMAP ISP */
+       REGULATOR_SUPPLY("hsusb1", "ehci-omap.0"),
+       {
+               .supply         = "vaux2",
+       }
+};
+
+static struct regulator_init_data omap3evm_vaux2 = {
+       .constraints = {
+               .min_uV         = 2800000,
+               .max_uV         = 2800000,
+               .apply_uV       = true,
+               .valid_modes_mask       = REGULATOR_MODE_NORMAL
+                                       | REGULATOR_MODE_STANDBY,
+               .valid_ops_mask         = REGULATOR_CHANGE_MODE
+                                       | REGULATOR_CHANGE_STATUS,
+       },
+       .num_consumer_supplies          = ARRAY_SIZE(omap3evm_vaux2_supplies),
+       .consumer_supplies              = omap3evm_vaux2_supplies,
+};
+
 static struct twl4030_platform_data omap3evm_twldata = {
        /* platform_data for children goes here */
        .keypad         = &omap3evm_kp_data,
@@ -659,6 +683,9 @@ static void __init omap3_evm_init(void)
        omap_mux_init_gpio(63, OMAP_PIN_INPUT);
        omap_hsmmc_init(mmc);
 
+       if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
+               omap3evm_twldata.vaux2 = &omap3evm_vaux2;
+
        omap3_evm_i2c_init();
 
        omap_display_init(&omap3_evm_dss_data);
-- 
1.7.5.4

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to