Configure busturnaround, cycle2cycledelay, waitmonitoringtime,
clkactivationtime in gpmc_cs_set_timings(). This is done so
that boards can configure these parameters of gpmc in Kernel
instead of relying on bootloader.
Signed-off-by: Afzal Mohammed <af...@ti.com>
---
arch/arm/mach-omap2/gpmc.c | 6 ++++++
arch/arm/plat-omap/include/plat/gpmc.h | 6 ++++++
2 files changed, 12 insertions(+)
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 578fd4c..517953f 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -313,6 +313,12 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings
*t)
GPMC_SET_ONE(GPMC_CS_CONFIG5, 24, 27, page_burst_access);
+ GPMC_SET_ONE(GPMC_CS_CONFIG6, 0, 3, bus_turnaround);
+ GPMC_SET_ONE(GPMC_CS_CONFIG6, 8, 11, cycle2cycle_delay);
+
+ GPMC_SET_ONE(GPMC_CS_CONFIG1, 18, 19, wait_monitoring);
+ GPMC_SET_ONE(GPMC_CS_CONFIG1, 25, 26, clk_activation);
+
if (cpu_is_omap34xx()) {
GPMC_SET_ONE(GPMC_CS_CONFIG6, 16, 19, wr_data_mux_bus);
GPMC_SET_ONE(GPMC_CS_CONFIG6, 24, 28, wr_access);
diff --git a/arch/arm/plat-omap/include/plat/gpmc.h
b/arch/arm/plat-omap/include/plat/gpmc.h
index 2e6e259..802fb22 100644
--- a/arch/arm/plat-omap/include/plat/gpmc.h
+++ b/arch/arm/plat-omap/include/plat/gpmc.h
@@ -128,6 +128,12 @@ struct gpmc_timings {
u16 rd_cycle; /* Total read cycle time */
u16 wr_cycle; /* Total write cycle time */
+ u16 bus_turnaround;
+ u16 cycle2cycle_delay;
+
+ u16 wait_monitoring;
+ u16 clk_activation;
+
/* The following are only on OMAP3430 */
u16 wr_access; /* WRACCESSTIME */
u16 wr_data_mux_bus; /* WRDATAONADMUXBUS */
--
1.7.10.2
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
