On 06/11/2012 09:27 AM, Afzal Mohammed wrote:
> Helper for setting GPMC timing by taking input as register values.
When are the timings calculated? Why not just use the existing
gpmc_cs_set_timings()?
I guess I am not convinced that we need to have multiple formats to pass
timings such as clock, period, etc.
I think that it is sufficient to pass the timings as time (period) as is
currently done and have the driver convert to clocks based upon the gpmc
fclk rate.
Jon
> Signed-off-by: Afzal Mohammed <af...@ti.com>
> ---
> arch/arm/mach-omap2/gpmc.c | 43 +++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 43 insertions(+)
>
> diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
> index 4e19010..e60076e3 100644
> --- a/arch/arm/mach-omap2/gpmc.c
> +++ b/arch/arm/mach-omap2/gpmc.c
> @@ -960,6 +960,49 @@ static void gpmc_setup_cs_config(unsigned cs, unsigned
> conf)
> gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, l);
> }
>
> +static inline void gpmc_set_one_timing(int cs, int reg, int start,
> + int end, u32 val)
> +{
> + u32 l;
> + unsigned mask;
> +
> + mask = (1 << (end - start + 1)) - 1;
> + l = gpmc_cs_read_reg(cs, reg);
> + l &= ~(mask << start);
> + l |= val << start;
> + gpmc_cs_write_reg(cs, reg, l);
> +}
> +
> +static void gpmc_cs_set_register_timings(int cs, const struct gpmc_timings
> *t)
> +{
> + gpmc_set_one_timing(cs, GPMC_CS_CONFIG1, 0, 1, t->sync_clk);
> + gpmc_set_one_timing(cs, GPMC_CS_CONFIG1, 18, 19, t->wait_monitoring);
> + gpmc_set_one_timing(cs, GPMC_CS_CONFIG1, 25, 26, t->clk_activation);
> +
> + gpmc_set_one_timing(cs, GPMC_CS_CONFIG2, 0, 3, t->cs_on);
> + gpmc_set_one_timing(cs, GPMC_CS_CONFIG2, 8, 12, t->cs_rd_off);
> + gpmc_set_one_timing(cs, GPMC_CS_CONFIG2, 16, 20, t->cs_wr_off);
> +
> + gpmc_set_one_timing(cs, GPMC_CS_CONFIG3, 0, 3, t->adv_on);
> + gpmc_set_one_timing(cs, GPMC_CS_CONFIG3, 8, 12, t->adv_rd_off);
> + gpmc_set_one_timing(cs, GPMC_CS_CONFIG3, 16, 20, t->adv_wr_off);
> +
> + gpmc_set_one_timing(cs, GPMC_CS_CONFIG4, 0, 3, t->oe_on);
> + gpmc_set_one_timing(cs, GPMC_CS_CONFIG4, 8, 12, t->oe_off);
> + gpmc_set_one_timing(cs, GPMC_CS_CONFIG4, 16, 19, t->we_on);
> + gpmc_set_one_timing(cs, GPMC_CS_CONFIG4, 24, 28, t->we_off);
> +
> + gpmc_set_one_timing(cs, GPMC_CS_CONFIG5, 24, 27, t->page_burst_access);
> + gpmc_set_one_timing(cs, GPMC_CS_CONFIG6, 0, 3, t->bus_turnaround);
> + gpmc_set_one_timing(cs, GPMC_CS_CONFIG6, 8, 11, t->cycle2cycle_delay);
> +
> + if (gpmc_revision >= 4) {
> + gpmc_set_one_timing(cs, GPMC_CS_CONFIG6, 16, 19,
> + t->wr_data_mux_bus);
> + gpmc_set_one_timing(cs, GPMC_CS_CONFIG6, 24, 28, t->wr_access);
> + }
> +}
> +
> static inline unsigned gpmc_bit_to_irq(unsigned bitmask)
> {
> return bitmask;
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
