that way all our IRQ handling will happen in
thread.
Signed-off-by: Felipe Balbi <ba...@ti.com>
---
drivers/i2c/busses/i2c-omap.c | 28 +++++++++++++++++++++++-----
1 file changed, 23 insertions(+), 5 deletions(-)
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index a9c1fa6..6e0b406 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -865,7 +865,23 @@ static int omap_i2c_transmit_data(struct omap_i2c_dev
*dev, u8 num_bytes,
}
static irqreturn_t
-omap_i2c_isr(int this_irq, void *dev_id)
+omap_i2c_isr(int irq, void *_dev)
+{
+ struct omap_i2c_dev *dev = _dev;
+ u16 stat;
+ u16 bits;
+
+ stat = omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG);
+ bits = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
+
+ if (stat & bits)
+ return IRQ_WAKE_THREAD;
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t
+omap_i2c_threaded_isr(int this_irq, void *dev_id)
{
struct omap_i2c_dev *dev = dev_id;
u16 bits;
@@ -1055,7 +1071,6 @@ omap_i2c_probe(struct platform_device *pdev)
struct omap_i2c_bus_platform_data *pdata = pdev->dev.platform_data;
struct device_node *node = pdev->dev.of_node;
const struct of_device_id *match;
- irq_handler_t isr;
int r;
/* NOTE: driver uses the static register mapping */
@@ -1155,9 +1170,12 @@ omap_i2c_probe(struct platform_device *pdev)
/* reset ASAP, clearing any IRQs */
omap_i2c_init(dev);
- isr = (dev->rev < OMAP_I2C_OMAP1_REV_2) ? omap_i2c_omap1_isr :
- omap_i2c_isr;
- r = request_irq(dev->irq, isr, 0, pdev->name, dev);
+ if (dev->rev < OMAP_I2C_OMAP1_REV_2)
+ r = request_irq(dev->irq, omap_i2c_omap1_isr, 0,
+ pdev->name, dev);
+ else
+ r = request_threaded_irq(dev->irq, omap_i2c_isr,
+ omap_i2c_threaded_isr, 0, pdev->name, dev);
if (r) {
dev_err(dev->dev, "failure requesting irq %i\n", dev->irq);
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
