Adding linux-arm ML.
Jon
On 06/25/2012 12:38 PM, Jon Hunter wrote:
> OMAP4470 currently fails to boot, printing various messages such as ...
>
> omap_hwmod: mpu: cannot clk_get main_clk dpll_mpu_m2_ck
> omap_hwmod: mpu: cannot _init_clocks
> ------------[ cut here ]------------
> WARNING: at arch/arm/mach-omap2/omap_hwmod.c:2062 _init+0x2a0/0x2e4()
> omap_hwmod: mpu: couldn't init clocks
> Modules linked in:
> [<c001c7fc>] (unwind_backtrace+0x0/0xf4) from [<c0043c64>]
> (warn_slowpath_common+0x4c/0x64)
> [<c0043c64>] (warn_slowpath_common+0x4c/0x64) from [<c0043d10>]
> (warn_slowpath_fmt+0x30/0x40)
> [<c0043d10>] (warn_slowpath_fmt+0x30/0x40) from [<c0674208>]
> (_init+0x2a0/0x2e4)
> [<c0674208>] (_init+0x2a0/0x2e4) from [<c067428c>]
> (omap_hwmod_setup_one+0x40/0x60)
> [<c067428c>] (omap_hwmod_setup_one+0x40/0x60) from [<c0674280>]
> (omap_hwmod_setup_one+0x34/0x60)
> [<c0674280>] (omap_hwmod_setup_one+0x34/0x60) from [<c06726f4>]
> (omap_dm_timer_init_one+0x30/0x250)
> [<c06726f4>] (omap_dm_timer_init_one+0x30/0x250) from [<c0672930>]
> (omap2_gp_clockevent_init+0x1c/0x108)
> [<c0672930>] (omap2_gp_clockevent_init+0x1c/0x108) from [<c0672c60>]
> (omap4_timer_init+0x10/0x5c)
> [<c0672c60>] (omap4_timer_init+0x10/0x5c) from [<c066c418>]
> (time_init+0x20/0x30)
> [<c066c418>] (time_init+0x20/0x30) from [<c0668814>]
> (start_kernel+0x1b0/0x304)
> [<c0668814>] (start_kernel+0x1b0/0x304) from [<80008044>] (0x80008044)
> ---[ end trace 1b75b31a2719ed1c ]---
>
> The problem is that currently none of the clocks are being registered for
> OMAP4470 devices and so on boot-up no clocks can be found and the kernel
> panics.
>
> This fix allows the kernel to boot without failure using a simple RAMDISK file
> system on OMAP4470 blaze board.
>
> V2:
> - Per feedback from Paul and Benoit the 4470 clock data is incomplete for new
> modules such as the 2D graphics block that has been added to the 4470.
> Therefore add a warning to indicate that the clock data is incomplete.
>
> Cc: Paul Walmsley <p...@pwsan.com>
> Cc: Benoit Cousson <b-cous...@ti.com>
>
> Signed-off-by: Jon Hunter <jon-hun...@ti.com>
> ---
> arch/arm/mach-omap2/clock44xx_data.c | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/mach-omap2/clock44xx_data.c
> b/arch/arm/mach-omap2/clock44xx_data.c
> index b825049..de53b70 100644
> --- a/arch/arm/mach-omap2/clock44xx_data.c
> +++ b/arch/arm/mach-omap2/clock44xx_data.c
> @@ -3407,9 +3407,12 @@ int __init omap4xxx_clk_init(void)
> if (cpu_is_omap443x()) {
> cpu_mask = RATE_IN_4430;
> cpu_clkflg = CK_443X;
> - } else if (cpu_is_omap446x()) {
> + } else if (cpu_is_omap446x() || cpu_is_omap447x()) {
> cpu_mask = RATE_IN_4460 | RATE_IN_4430;
> cpu_clkflg = CK_446X | CK_443X;
> +
> + if (cpu_is_omap447x())
> + pr_warn("WARNING: OMAP4470 clock data incomplete!\n");
> } else {
> return 0;
> }
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
