On Friday 29 June 2012, Andy Green wrote: > On 06/29/12 21:45, the mail apparently from Arnd Bergmann included: > > On Friday 29 June 2012, Tony Lindgren wrote: > > In case we have a device tree, we should just be using the USB binding > > to find the specific device node, and add the property there. Then > > the device driver can use of_get_mac_address() on the usb device itself. > > > > I'm not sure what it takes to add the link for the device node in the > > usb probing code, but my feeling is that it's not too hard. > > > > Right now, USB is probed entirely without DT, so the patch is about > > the best we can do. > > Yes none of this was really hard the problem with more generic approach > was getting comprehension and not auto-reject at the other subsystems. > To be fair USB is USB and DT is Arm-specific issue.
I don't understand. I'm sure that there are powerpc, x86 or mips systems with DT that have hardwired USB ports, so it's just a matter of time until someone forgets to stick an EEPROM on the network port of one of those. > >>>> 3. What about mac address in board-generic.c when booting panda with > >>>> device tree? > >>> > >>> I don't mind adapting it for that case. > >> > >> Just to try to think about some alternatives, how about something like > >> this: This all could be a driver called soft-mac or something that does > >> what your patches are doing. Except then it would be completely generic > >> and would be able to take device names and mac addresses from platform > >> data or from devicetree. > > > > That driver would be completely generic to all platforms, but be > > very specific to finding the mac address of a device, as opposed to > > other properties. > > > > I suspect that if we do that, we will still need a way to bind a > > device_node to a usb device for the purpose of finding other > > properties, such as external regulators or clocks that are connected > > to a hardwired USB device. > > There's no standardized exposure of logical regulators over USB afaik so > you won't be able to 'find' them without a VID:PID -bound specific > driver that already knew about them. The point is that as soon as we have implement the standard DT bindings for USB, we get a way to do this. I would assume that someone has stumbled over this issue before and just added a hack to their driver to hardwire some regulator, rather than doing it properly. > > Normally USB tends to just work because the device is expected to > > be hot-pluggable anyway. If the USB device is soldered to the > > board, the hardware designers can take some shortcuts > > Tony's point about modularized host drivers coming in random order seems > to be a fair one. We don't build ehci modular so we don't care about it > but from maintainer pov it's a legit issue. Right, it's definitely ugly. The DT binding would take care of it because it gives us a way to identify the device, but I think it also makes sense to have your patches for the common case that ehci is built-in. Arnd -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html