On Thu, Jul 19, 2012 at 1:45 PM, Yegor Yefremov <yegor_s...@visionsystems.de> wrote: > Am 19.07.2012 09:43, schrieb S, Venkatraman: >> On Thu, Jul 19, 2012 at 12:58 PM, Yegor Yefremov >> <yegor_s...@visionsystems.de> wrote: >>> Am 19.07.2012 09:07, schrieb Shilimkar, Santosh: >>>> On Thu, Jul 19, 2012 at 12:25 PM, Yegor Yefremov >>>> <yegor_s...@visionsystems.de> wrote: >>>>> Am 19.07.2012 08:34, schrieb Shilimkar, Santosh: >>>>>> On Thu, Jul 19, 2012 at 11:54 AM, Yegor Yefremov >>>>>> <yegor_s...@visionsystems.de> wrote: >>>>>>> What patches do I need to get MMC working with linux-omap master? >>>>>>> >>>>>>> omap_hsmmc omap_hsmmc.0: Failed to get debounce clk >>>>>>> omap-dma-engine omap-dma-engine: allocating channel for 62 >>>>>>> omap-dma-engine omap-dma-engine: allocating channel for 61 >>>>>>> omap_hsmmc omap_hsmmc.1: Failed to get debounce clk >>>>>>> omap-dma-engine omap-dma-engine: allocating channel for 48 >>>>>>> omap-dma-engine omap-dma-engine: allocating channel for 47 >>>>>>> >>>>>>> I searched for this issue and saw some patches for common clock >>>>>>> framework >>>>>>> that were scheduled for 3.6, but I'm not sure it's enough or weather >>>>>>> they >>>>>>> are already incorporated in linux-omap. >>>>>>> >>>>>> I guess you need [1] to get around the issue. >>>>>> >>>>>> [1] http://www.spinics.net/lists/linux-omap/msg73965.html >>>>> though I haven't applied this patch I have DMA activated >>>>> (CONFIG_DMADEVICES and CONFIG_DMA_OMAP). Found in some other thread [1]. >>>>> As far as I can tell, debounce clk is the problem. >>>>> >>>> Sorry. I miss-read the message. >>> The whole log for reference: >>> >>> Booting Linux on physical CPU 0 >>> Linux version 3.5.0-rc6-12227-g60701f4-dirty () (gcc version 4.5.3 >>> (Buildroot 2012.05-rc2-00009-gfbd5a1d-dirty) ) #90 Thu Jul 19 09:23:31 CEST >>> 2012 >>> CPU: ARMv7 Processor [411fc087] revision 7 (ARMv7), cr=10c53c7d >>> CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache >>> Machine: OMAP3517/AM3517 EVM >>> Ignoring tag cmdline (using the default kernel command line) >>> bootconsole [earlycon0] enabled >>> Memory policy: ECC disabled, Data cache writeback >>> AM3517 ES1.1 (l2cache sgx neon ) >>> Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz >>> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64768 >>> Kernel command line: root=/dev/mmcblk0p2 rootwait console=ttyO2,115200 >>> earlyprintk=serial,ttyO2,115200 >>> PID hash table entries: 1024 (order: 0, 4096 bytes) >>> Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) >>> Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) >>> Memory: 255MB = 255MB total >>> Memory: 247380k/247380k available, 14764k reserved, 0K highmem >>> Virtual kernel memory layout: >>> vector : 0xffff0000 - 0xffff1000 ( 4 kB) >>> fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) >>> vmalloc : 0xd0800000 - 0xff000000 ( 744 MB) >>> lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) >>> pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) >>> .text : 0xc0008000 - 0xc055e6a8 (5466 kB) >>> .init : 0xc055f000 - 0xc0594874 ( 215 kB) >>> .data : 0xc0596000 - 0xc05fccc0 ( 412 kB) >>> .bss : 0xc05fcce4 - 0xc0b2a1e8 (5302 kB) >>> NR_IRQS:474 >>> IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts >>> Total of 96 interrupts on 1 active controller >>> OMAP clockevent source: GPTIMER1 at 32768 Hz >>> sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms >>> OMAP clocksource: 32k_counter at 32768 Hz >>> Console: colour dummy device 80x30 >>> Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar >>> ... MAX_LOCKDEP_SUBCLASSES: 8 >>> ... MAX_LOCK_DEPTH: 48 >>> ... MAX_LOCKDEP_KEYS: 8191 >>> ... CLASSHASH_SIZE: 4096 >>> ... MAX_LOCKDEP_ENTRIES: 16384 >>> ... MAX_LOCKDEP_CHAINS: 32768 >>> ... CHAINHASH_SIZE: 16384 >>> memory used by lock dependency info: 3695 kB >>> per task-struct memory footprint: 1152 bytes >>> Calibrating delay loop... 331.40 BogoMIPS (lpj=1296384) >>> pid_max: default: 32768 minimum: 301 >>> Security Framework initialized >>> Mount-cache hash table entries: 512 >>> CPU: Testing write buffer coherency: ok >>> Setting up static identity map for 0x80444ff0 - 0x80445048 >>> devtmpfs: initialized >>> dummy: >>> NET: Registered protocol family 16 >>> GPMC revision 5.0 >>> gpmc: irq-20 could not claim: err -22 >>> OMAP GPIO hardware version 2.5 >>> omap_mux_init: Add partition: #1: core, flags: 0 >>> _omap_mux_get_by_name: Could not find signal uart4_rx.uart4_rx >>> Reprogramming SDRC clock to 332000000 Hz >>> dpll3_m2_clk rate change failed: -22 >>> hw-breakpoint: debug architecture 0x4 unsupported. >>> OMAP DMA hardware revision 4.0 >>> bio: create slab <bio-0> at 0 >>> omap-dma-engine omap-dma-engine: OMAP DMA engine driver >>> SCSI subsystem initialized >>> omap_i2c omap_i2c.1: bus 1 rev1.3.12 at 400 kHz >>> omap_i2c omap_i2c.2: bus 2 rev1.3.12 at 400 kHz >>> omap_i2c omap_i2c.3: bus 3 rev1.3.12 at 400 kHz >>> Bluetooth: Core ver 2.16 >>> NET: Registered protocol family 31 >>> Bluetooth: HCI device and connection manager initialized >>> Bluetooth: HCI socket layer initialized >>> Bluetooth: L2CAP socket layer initialized >>> Bluetooth: SCO socket layer initialized >>> cfg80211: Calling CRDA to update world regulatory domain >>> Switching to clocksource 32k_counter >>> NET: Registered protocol family 2 >>> IP route cache hash table entries: 2048 (order: 1, 8192 bytes) >>> TCP established hash table entries: 8192 (order: 4, 65536 bytes) >>> TCP bind hash table entries: 8192 (order: 6, 294912 bytes) >>> TCP: Hash tables configured (established 8192 bind 8192) >>> TCP: reno registered >>> UDP hash table entries: 256 (order: 2, 20480 bytes) >>> UDP-Lite hash table entries: 256 (order: 2, 20480 bytes) >>> NET: Registered protocol family 1 >>> RPC: Registered named UNIX socket transport module. >>> RPC: Registered udp transport module. >>> RPC: Registered tcp transport module. >>> RPC: Registered tcp NFSv4.1 backchannel transport module. >>> NetWinder Floating Point Emulator V0.97 (double precision) >>> VFS: Disk quotas dquot_6.5.2 >>> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) >>> NFS: Registering the id_resolver key type >>> Key type id_resolver registered >>> jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. >>> msgmni has been set to 483 >>> io scheduler noop registered >>> io scheduler deadline registered >>> io scheduler cfq registered (default) >>> Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled >>> omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0 >>> omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1 >>> omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2 >>> console [ttyO2] enabled, bootconsole disabled >>> console [ttyO2] enabled, bootconsole disabled >>> omap_uart.3: ttyO3 at MMIO 0x4809e000 (irq = 84) is a OMAP UART3 >>> brd: module loaded >>> loop: module loaded >>> mtdoops: mtd device (mtddev=name/number) must be supplied >>> OneNAND driver initializing >>> davinci_mdio davinci_mdio.0: davinci mdio revision 1.5 >>> davinci_mdio davinci_mdio.0: detected phy mask fffffffd >>> davinci_mdio.0: probed >>> davinci_mdio davinci_mdio.0: phy[1]: device davinci_mdio-0:01, driver >>> unknown >>> mousedev: PS/2 mouse device common for all mice >>> i2c /dev entries driver >>> omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec >>> Bluetooth: HCI UART driver ver 2.2 >>> Bluetooth: HCI H4 protocol initialized >>> Bluetooth: HCI BCSP protocol initialized >>> Bluetooth: HCILL protocol initialized >>> omap_hsmmc omap_hsmmc.0: Failed to get debounce clk >>> omap-dma-engine omap-dma-engine: allocating channel for 62 >>> omap-dma-engine omap-dma-engine: allocating channel for 61 >>> omap_hsmmc omap_hsmmc.1: Failed to get debounce clk >>> omap-dma-engine omap-dma-engine: allocating channel for 48 >>> omap-dma-engine omap-dma-engine: allocating channel for 47 >>> oprofile: hardware counters not available >>> oprofile: using timer interrupt. >>> TCP: cubic registered >>> Initializing XFRM netlink socket >>> NET: Registered protocol family 17 >>> NET: Registered protocol family 15 >>> lib80211: common routines for IEEE802.11 drivers >>> Key type dns_resolver registered >>> VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 >>> voltdm_scale: No voltage scale API registered for vdd_mpu_iva >>> voltdm_scale: No voltage scale API registered for vdd_core >>> PM: no software I/O chain control; some wakeups may be lost >>> ThumbEE CPU extension supported. >>> clock: disabling unused clocks to save power >>> davinci_emac davinci_emac.0: using random MAC addr: 9a:df:69:5d:52:ee >>> Waiting for root device /dev/mmcblk0p2... >>> mmc0: host does not support reading read-only switch. assuming write-enable. >>> -- >> Debouce clocks failures are non fatal, and are present in OMAP2xxx only. >> (I don't know about AM35xx, but most likely its not present). > > You're right: > http://old.nabble.com/-PATCH-V2--omap_hsmmc:-Fix-for-the-db-clock-failure-message-td25047778.html > >> The last 2 lines shows that mmc0 is enumerated, but the boot partition is >> not. >> If possible, can you please provide logs with MMC_DEBUG enabled at compile >> time >> and a verbose loglevel (loglevel=8) ? > > Bluetooth: HCI UART driver ver 2.2 > Bluetooth: HCI H4 protocol initialized > Bluetooth: HCI BCSP protocol initialized > Bluetooth: HCILL protocol initialized > omap_hsmmc omap_hsmmc.0: context was not lost > omap_hsmmc omap_hsmmc.0: enabled > omap_hsmmc omap_hsmmc.0: Failed to get debounce clk > omap-dma-engine omap-dma-engine: allocating channel for 62 > omap-dma-engine omap-dma-engine: allocating channel for 61 > mmc0: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 19 width 0 timing 0 > omap_hsmmc omap_hsmmc.0: Set clock to 0Hz > mmc0: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 19 width 0 timing 0 > omap_hsmmc omap_hsmmc.0: Set clock to 400000Hz > omap_hsmmc omap_hsmmc.0: disabled > omap_hsmmc omap_hsmmc.1: context was not lost > omap_hsmmc omap_hsmmc.1: enabled > omap_hsmmc omap_hsmmc.1: Failed to get debounce clk > omap-dma-engine omap-dma-engine: allocating channel for 48 > omap-dma-engine omap-dma-engine: allocating channel for 47 > omap_hsmmc omap_hsmmc.0: context was not lost > omap_hsmmc omap_hsmmc.0: enabled > mmc0: mmc_rescan_try_freq: trying to init card at 400000 Hz > mmc0: starting CMD52 arg 00000c00 flags 00000195 > omap_hsmmc omap_hsmmc.0: mmc0: CMD52, argument 0x00000c00 > omap_hsmmc omap_hsmmc.0: IRQ Status is 18000 > omap_hsmmc omap_hsmmc.0: MMC IRQ 0x18000 : ERRI CTO > mmc0: req done (CMD52): -110: 00000000 00000000 00000000 00000000 > mmc1: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 19 width 0 timing 0 > omap_hsmmc omap_hsmmc.1: Set clock to 0Hz > mmc0: starting CMD52 arg 80000c08 flags 00000195 > omap_hsmmc omap_hsmmc.0: mmc0: CMD52, argument 0x80000c08 > omap_hsmmc omap_hsmmc.0: IRQ Status is 18000 > omap_hsmmc omap_hsmmc.0: MMC IRQ 0x18000 : ERRI CTO > mmc0: req done (CMD52): -110: 00000000 00000000 00000000 00000000 > mmc1: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 19 width 0 timing 0 > omap_hsmmc omap_hsmmc.1: Set clock to 400000Hz > mmc0: clock 400000Hz busmode 2 powermode 2 cs 1 Vdd 19 width 0 timing 0 > omap_hsmmc omap_hsmmc.0: Set clock to 400000Hz > mmc0: starting CMD0 arg 00000000 flags 000000c0 > omap_hsmmc omap_hsmmc.0: mmc0: CMD0, argument 0x00000000 > omap_hsmmc omap_hsmmc.0: IRQ Status is 1 > mmc0: req done (CMD0): 0: 00000000 00000000 00000000 00000000 > omap_hsmmc omap_hsmmc.1: disabled > mmc0: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 19 width 0 timing 0 > omap_hsmmc omap_hsmmc.0: Set clock to 400000Hz > oprofile: hardware counters not available > oprofile: using timer interrupt. > TCP: cubic registered > Initializing XFRM netlink socket > NET: Registered protocol family 17 > NET: Registered protocol family 15 > lib80211: common routines for IEEE802.11 drivers > lib80211_crypt: registered algorithm 'NULL' > Key type dns_resolver registered > VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 > voltdm_scale: No voltage scale API registered for vdd_mpu_iva > voltdm_scale: No voltage scale API registered for vdd_core > PM: no software I/O chain control; some wakeups may be lost > ThumbEE CPU extension supported. > clock: disabling unused clocks to save power > mmc0: starting CMD8 arg 000001aa flags 000002f5 > omap_hsmmc omap_hsmmc.0: mmc0: CMD8, argument 0x000001aa > omap_hsmmc omap_hsmmc.0: IRQ Status is 1 > mmc0: req done (CMD8): 0: 000001aa 00000000 00000000 00000000 > mmc0: starting CMD5 arg 00000000 flags 000002e1 > omap_hsmmc omap_hsmmc.0: mmc0: CMD5, argument 0x00000000 > omap_hsmmc omap_hsmmc.0: IRQ Status is 18000 > omap_hsmmc omap_hsmmc.0: MMC IRQ 0x18000 : ERRI CTO > mmc0: req failed (CMD5): -110, retrying... > omap_hsmmc omap_hsmmc.0: mmc0: CMD5, argument 0x00000000 > omap_hsmmc omap_hsmmc.0: IRQ Status is 18000 > omap_hsmmc omap_hsmmc.0: MMC IRQ 0x18000 : ERRI CTO > mmc0: req failed (CMD5): -110, retrying... > omap_hsmmc omap_hsmmc.0: mmc0: CMD5, argument 0x00000000 > omap_hsmmc omap_hsmmc.0: IRQ Status is 18000 > omap_hsmmc omap_hsmmc.0: MMC IRQ 0x18000 : ERRI CTO > davinci_emac davinci_emac.0: using random MAC addr: 0a:e0:2b:8a:d1:27 > mmc0: req failed (CMD5): -110, retrying... > omap_hsmmc omap_hsmmc.0: mmc0: CMD5, argument 0x00000000 > omap_hsmmc omap_hsmmc.0: IRQ Status is 18000 > omap_hsmmc omap_hsmmc.0: MMC IRQ 0x18000 : ERRI CTO > mmc0: req done (CMD5): -110: 00000000 00000000 00000000 00000000 > mmc0: starting CMD55 arg 00000000 flags 000000f5 > omap_hsmmc omap_hsmmc.0: mmc0: CMD55, argument 0x00000000 > omap_hsmmc omap_hsmmc.0: IRQ Status is 1 > mmc0: req done (CMD55): 0: 00400120 00000000 00000000 00000000 > mmc0: starting CMD41 arg 00000000 flags 000000e1 > omap_hsmmc omap_hsmmc.0: mmc0: CMD41, argument 0x00000000 > omap_hsmmc omap_hsmmc.0: IRQ Status is 1 > mmc0: req done (CMD41): 0: 00ff8000 00000000 00000000 00000000 > mmc0: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 15 width 0 timing 0 > omap_hsmmc omap_hsmmc.0: Set clock to 400000Hz > mmc0: clock 400000Hz busmode 2 powermode 2 cs 1 Vdd 15 width 0 timing 0 > omap_hsmmc omap_hsmmc.0: Set clock to 400000Hz > Waiting for root device /dev/mmcblk0p2... > mmc0: starting CMD0 arg 00000000 flags 000000c0 > omap_hsmmc omap_hsmmc.0: mmc0: CMD0, argument 0x00000000 >
>From this, one can only infer that the card is not responding at all, and all attempts are returning with a timeout (CTO=Command Time Out). These (control) commands don't use DMA, so it's not a DMA issue upto this. If the card is fine, and it worked before, I would suggest a bisect. Meanwhile I'll check lo-master with my OMAP4 boards. ~Venkat -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html