From: Felipe Balbi <ba...@ti.com> omap_i2c_dev is allocated with kzalloc(), so we need not initialize b_hw to zero.
Signed-off-by: Felipe Balbi <ba...@ti.com> Signed-off-by: Shubhrajyoti D <shubhrajy...@ti.com> --- drivers/i2c/busses/i2c-omap.c | 4 +--- 1 files changed, 1 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index d732865..19f6048 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -1092,9 +1092,7 @@ omap_i2c_probe(struct platform_device *pdev) dev->fifo_size = (dev->fifo_size / 2); - if (dev->rev >= OMAP_I2C_REV_ON_3630_4430) - dev->b_hw = 0; /* Disable hardware fixes */ - else + if (dev->rev < OMAP_I2C_REV_ON_3630_4430) dev->b_hw = 1; /* Enable hardware fixes */ /* calculate wakeup latency constraint for MPU */ -- 1.7.5.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html