When a panel driver calls a VENC function, it passes the omap_dss_device
pointer, this pointer currently propagates within the VENC driver to configure
the interface.
Extract the omap_dss_output pointer from omap_dss_device received from the panel
driver, pass the output pointer to VENC functions local to the driver to
configure the interface, these functions no longer need omap_dss_device since
the driver now maintains a copy of output parameters.
Replace dssdev->manager references with out->manager references as only these
will be valid later.
With the addition of outputs. There is a possibility that an omap_dss_device
isn't connected to an output, or a manager isn't connected to an output yet.
Ensure that the VENC interface functions proceed only if the output is non NULL.
Signed-off-by: Archit Taneja <arc...@ti.com>
---
drivers/video/omap2/dss/venc.c | 32 ++++++++++++++++++++------------
1 file changed, 20 insertions(+), 12 deletions(-)
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c
index 942a378..3fe974f 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/omap2/dss/venc.c
@@ -428,7 +428,7 @@ static const struct venc_config *venc_timings_to_config(
return NULL;
}
-static int venc_power_on(struct omap_dss_device *dssdev)
+static int venc_power_on(struct omap_dss_output *out)
{
u32 l;
int r;
@@ -455,13 +455,13 @@ static int venc_power_on(struct omap_dss_device *dssdev)
venc_write_reg(VENC_OUTPUT_CONTROL, l);
- dss_mgr_set_timings(dssdev->manager, &venc.timings);
+ dss_mgr_set_timings(out->manager, &venc.timings);
r = regulator_enable(venc.vdda_dac_reg);
if (r)
goto err1;
- r = dss_mgr_enable(dssdev->manager);
+ r = dss_mgr_enable(out->manager);
if (r)
goto err2;
@@ -478,12 +478,12 @@ err0:
return r;
}
-static void venc_power_off(struct omap_dss_device *dssdev)
+static void venc_power_off(struct omap_dss_output *out)
{
venc_write_reg(VENC_OUTPUT_CONTROL, 0);
dss_set_dac_pwrdn_bgz(0);
- dss_mgr_disable(dssdev->manager);
+ dss_mgr_disable(out->manager);
regulator_disable(venc.vdda_dac_reg);
@@ -498,14 +498,15 @@ unsigned long venc_get_pixel_clock(void)
int omapdss_venc_display_enable(struct omap_dss_device *dssdev)
{
+ struct omap_dss_output *out = dssdev->output;
int r;
DSSDBG("venc_display_enable\n");
mutex_lock(&venc.venc_lock);
- if (dssdev->manager == NULL) {
- DSSERR("Failed to enable display: no manager\n");
+ if (out == NULL || out->manager == NULL) {
+ DSSERR("Failed to enable display: no output/manager\n");
r = -ENODEV;
goto err0;
}
@@ -520,7 +521,7 @@ int omapdss_venc_display_enable(struct omap_dss_device
*dssdev)
dssdev->platform_enable(dssdev);
- r = venc_power_on(dssdev);
+ r = venc_power_on(out);
if (r)
goto err1;
@@ -540,11 +541,13 @@ err0:
void omapdss_venc_display_disable(struct omap_dss_device *dssdev)
{
+ struct omap_dss_output *out = dssdev->output;
+
DSSDBG("venc_display_disable\n");
mutex_lock(&venc.venc_lock);
- venc_power_off(dssdev);
+ venc_power_off(out);
omap_dss_stop_device(dssdev);
@@ -557,8 +560,13 @@ void omapdss_venc_display_disable(struct omap_dss_device
*dssdev)
void omapdss_venc_set_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
+ struct omap_dss_output *out = dssdev->output;
+
DSSDBG("venc_set_timings\n");
+ if (out == NULL)
+ return;
+
mutex_lock(&venc.venc_lock);
/* Reset WSS data when the TV standard changes. */
@@ -571,13 +579,13 @@ void omapdss_venc_set_timings(struct omap_dss_device
*dssdev,
int r;
/* turn the venc off and on to get new timings to use */
- venc_power_off(dssdev);
+ venc_power_off(out);
- r = venc_power_on(dssdev);
+ r = venc_power_on(out);
if (r)
DSSERR("failed to power on VENC\n");
} else {
- dss_mgr_set_timings(dssdev->manager, timings);
+ dss_mgr_set_timings(out->manager, timings);
}
mutex_unlock(&venc.venc_lock);
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
