Hi Koen,
On Fri, Aug 31, 2012 at 21:23:18, Koen Kooi wrote:
>
> Op 30 aug. 2012, om 22:35 heeft Tony Lindgren <t...@atomide.com> het volgende
> geschreven:
>
> > * AnilKumar Ch <anilku...@ti.com> [120828 01:11]:
> >> Adds GPIO pinctrl nodes to am3358_pinmux master node to control
> >> user leds (USR0, USR1, USR2 and USR3) present on BeagleBone.
> >>
> >> Signed-off-by: AnilKumar Ch <anilku...@ti.com>
> >> ---
> >> arch/arm/boot/dts/am335x-bone.dts | 14 ++++++++++++++
> >> 1 file changed, 14 insertions(+)
> >>
> >> diff --git a/arch/arm/boot/dts/am335x-bone.dts
> >> b/arch/arm/boot/dts/am335x-bone.dts
> >> index a7906cb..58f5042 100644
> >> --- a/arch/arm/boot/dts/am335x-bone.dts
> >> +++ b/arch/arm/boot/dts/am335x-bone.dts
> >> @@ -18,6 +18,20 @@
> >> reg = <0x80000000 0x10000000>; /* 256 MB */
> >> };
> >>
> >> + am3358_pinmux: pinmux@44E10800 {
> >> + pinctrl-names = "default";
> >> + pinctrl-0 = <&userled_pins>;
> >> +
> >> + userled_pins: pinmux_userled_pins {
> >> + pinctrl-single,pins = <
> >> + 0x54 0x7 /* gpmc_a5.gpio1_21, OUTPUT |
> >> MODE7 */
> >> + 0x58 0x17 /* gpmc_a6.gpio1_22,
> >> OUTPUT_PULLUP | MODE7 */
> >> + 0x5C 0x7 /* gpmc_a7.gpio1_23, OUTPUT |
> >> MODE7 */
> >> + 0x60 0x17 /* gpmc_a8.gpio1_24,
> >> OUTPUT_PULLUP | MODE7 */
> >> + >;
> >> + };
> >> + };
> >> +
> >
> > Looks like this patch should also claim these pins by the led driver.
> > Then the led driver should just do pinctrl_get_select_default(&pdev->dev)
> > in it's probe function to set the pins.
>
> FWIW, I've been using this for a while now:
>
> + leds {
> + compatible = "gpio-leds";
> + heartbeat {
> + label = "beaglebone::usr0";
> + gpios = <&gpio2 21 0>;
> + linux,default-trigger = "heartbeat";
> + };
> +
> + mmc {
> + label = "beaglebone:usr1";
> + gpios = <&gpio2 22 0>;
> + linux,default-trigger = "mmc0";
> + };
Thanks for the inputs, similar data but not exact is added to
v5 series.
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&userled_pins>;
+
+ led0 {
+ label = "status:green:user0";
+ gpios = <&gpio2 21 0>;
+ default-state = "off";
+ };
+
+ led1 {
+ label = "status:green:user1";
+ gpios = <&gpio2 22 0>;
+ default-state = "off";
+ };
+
+ led2 {
+ label = "status:green:user2";
+ gpios = <&gpio2 23 0>;
+ default-state = "off";
+ };
+
+ led3 {
+ label = "status:green:user3";
+ gpios = <&gpio2 24 0>;
+ default-state = "off";
+ };
+ };
+
Can you review my v5 patches and tell me if there are any
modifications/changes required?
Thanks
AnilKumar
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
