Remove a useless comment and move GIC controller outside
of the OCP node since it does use the MPU internal bus and
not the OCP.
This will not change the functionality but will reflect the
reality more accurately.

Signed-off-by: Benoit Cousson <b-cous...@ti.com>
---

Hi Tony

This is a minor cleanup done since Santosh's series is introducing some more 
MPU devices that does not belong to the TI main OCP interconnect. It makes 
sense for consistency / accuracy to move GIC to the same location.

Regards,
Benoit

 arch/arm/boot/dts/omap4.dtsi |   40 ++++++++--------------------------------
 1 files changed, 8 insertions(+), 32 deletions(-)

diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 2b670ab..1853dc7 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -38,6 +38,14 @@
                };
        };
 
+       gic: interrupt-controller@48241000 {
+               compatible = "arm,cortex-a9-gic";
+               interrupt-controller;
+               #interrupt-cells = <3>;
+               reg = <0x48241000 0x1000>,
+                     <0x48240100 0x0100>;
+       };
+
        L2: l2-cache-controller@48242000 {
                compatible = "arm,pl310-cache";
                reg = <0x48242000 0x1000>;
@@ -76,30 +84,6 @@
        /*
         * XXX: Use a flat representation of the OMAP4 interconnect.
         * The real OMAP interconnect network is quite complex.
-        *
-        * MPU -+-- MPU_PRIVATE - GIC, L2
-        *      |
-        *      +----------------+----------+
-        *      |                |          |
-        *      +            +- EMIF - DDR  |
-        *      |            |              |
-        *      |            +     +--------+
-        *      |            |     |
-        *      |            +- L4_ABE - AESS, MCBSP, TIMERs...
-        *      |            |
-        *      +- L3_MAIN --+- L4_CORE - IPs...
-        *                   |
-        *                   +- L4_PER - IPs...
-        *                   |
-        *                   +- L4_CFG -+- L4_WKUP - IPs...
-        *                   |          |
-        *                   |          +- IPs...
-        *                   +- IPU ----+
-        *                   |          |
-        *                   +- DSP ----+
-        *                   |          |
-        *                   +- DSS ----+
-        *
         * Since that will not bring real advantage to represent that in DT for
         * the moment, just use a fake OCP bus entry to represent the whole bus
         * hierarchy.
@@ -111,14 +95,6 @@
                ranges;
                ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
 
-               gic: interrupt-controller@48241000 {
-                       compatible = "arm,cortex-a9-gic";
-                       interrupt-controller;
-                       #interrupt-cells = <3>;
-                       reg = <0x48241000 0x1000>,
-                             <0x48240100 0x0100>;
-               };
-
                gpio1: gpio@4a310000 {
                        compatible = "ti,omap4-gpio";
                        ti,hwmods = "gpio1";
-- 
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to