Hi Tony,
On 09/01/2012 02:52 AM, Tony Lindgren wrote:
> * Tony Lindgren <t...@atomide.com> [120830 17:53]:
>> We can't use hardcoded interrupts for SPARSE_IRQ, and can replace
>> the hardcoded gpio_base with twl_gpiochip.base after it's been
>> allocated.
> ...
>
>> --- a/include/linux/mfd/twl6040.h
>> +++ b/include/linux/mfd/twl6040.h
>> @@ -194,7 +194,6 @@ struct twl6040_vibra_data {
>>
>> struct twl6040_platform_data {
>> int audpwron_gpio; /* audio power-on gpio */
>> - unsigned int irq_base;
>>
>> struct twl6040_codec_data *codec;
>> struct twl6040_vibra_data *vibra;
>
> The platform_data irq_base is not being used it seems..
Yes, this is not in use.
>
>> @@ -222,7 +221,6 @@ struct twl6040 {
>> unsigned int mclk;
>>
>> unsigned int irq;
>> - unsigned int irq_base;
>> u8 irq_masks_cur;
>> u8 irq_masks_cache;
>> };
>
> ..but irq_base here is still in use as that's where the value from
> irq_alloc_descs() is being stored to. So I'll drop the changes to
> struct twl6040 from this patch as otherwise twl6040 code won't compile.
>
> Turns out I did not have twl6040 selected in any of the testconfigs
> that I ran.
I store the irq_base in a private data for the MFD driver so child drivers can
request the correct IRQ.
You can safely remove the irq_base from twl6040_platform_data struct
--
Péter
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
