This patch series adds device tree support for MUSB.
The glue layer is now made to write to mailbox register (present in
control module) instead of calling phy layer to write to mailbox
register. Writing to mailbox register notifies the core of events like
device connect/disconnect.
Previously these patches were part of
[PATCH v7 0/7] omap: musb: Add device tree support
This patch series was created to contain only the *musb* part and it
also has one hwmod patch.
This patch series was created on
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git musb
Kishon Vijay Abraham I (3):
arm: omap: hwmod: add a new addr space in otg for writing to control
module
usb: musb: omap: write directly to mailbox instead of using phy
usb: musb: omap: Add device tree support for omap musb glue
Documentation/devicetree/bindings/usb/omap-usb.txt | 33 ++++++
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 5 +
drivers/usb/musb/omap2430.c | 106 ++++++++++++++++++--
drivers/usb/musb/omap2430.h | 9 ++
4 files changed, 146 insertions(+), 7 deletions(-)
create mode 100644 Documentation/devicetree/bindings/usb/omap-usb.txt
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
