On Mon, Sep 10, 2012 at 7:41 PM, Stephen Warren <swar...@wwwdotorg.org> wrote: > On 09/10/2012 09:23 AM, Linus Walleij wrote:
> That seems like exactly what we were trying to avoid when we added the > possibility for GPIO to call into pinctrl. > > Documentation/gpio.txt already contains: > >> For GPIOs that use pins known to the pinctrl subsystem, that subsystem should >> be informed of their use; a gpiolib driver's .request() operation may call >> pinctrl_request_gpio(), and a gpiolib driver's .free() operation may call >> pinctrl_free_gpio(). The pinctrl subsystem allows a pinctrl_request_gpio() >> to succeed concurrently with a pin or pingroup being "owned" by a device for >> pin multiplexing. > > In order to resolve this, shouldn't we simply change the "should" at the > end of the first line I quoted to "must"? That way, there'd never be any > need to use pinctrl if you're only relying on gpiolib APIs. > > (and I'd argue that the text was already meant to say "must", so this > isn't actually a change to the intent, just a clarification). It should deal with all the simple muxing use cases yes. And I am uncertain about the scope for this patch, if it only pertains to muxing, and in that case it would be solved by adding a proper GPIO backend to pinctrl-single.c. But it doesn't help with some real-world usecases if I'm not mistaken. If you want to set up a certain GPIO pin as pull-down (I guess this could be the case for a LED array), this cannot be done through any of these functions: extern int pinctrl_request_gpio(unsigned gpio); extern void pinctrl_free_gpio(unsigned gpio); extern int pinctrl_gpio_direction_input(unsigned gpio); extern int pinctrl_gpio_direction_output(unsigned gpio); So either we have to use a pin config hog to do this, or we have to use devm_pinctrl_get_select_default(&pdev->dev); from the driver (as this patch does). Either way it is using the pinctrl system orthogonally to the GPIO system, it doesn't happen from pinctrl_request_gpio() or so. An alternative solution would be to add functions for controlling pinconfig and whatnot to the GPIO glue, which in turn would require adding frontends all over <linux/gpio.h> which in turn was the thing that Grant nixed to I got started with pinctrl instead... But I'm open to any other suggestions. Would it be possible for pinctrl_request_gpio() to activate a pin config in the map for example? Currently it can only do muxing. It's also possible to have the driver do something custom behind the back of pinctrl altogether as a response to pinctrl_request_gpio() but it wouldn't be any elegant... Yours, Linus Walleij -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html