c538d20c7f (and maybe previous commits) broke set_mctrl() by making
it only capable of setting bits in the MCR register. This prevents
software controlled flow control and modem control line manipulation
via TIOCMSET/TIOCMBIC from working correctly.
Signed-off-by: Russell King <rmk+ker...@arm.linux.org.uk>
---
drivers/tty/serial/omap-serial.c | 8 +++++---
1 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index d3cda0c..0a50669 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -488,7 +488,7 @@ static unsigned int serial_omap_get_mctrl(struct uart_port
*port)
static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
struct uart_omap_port *up = (struct uart_omap_port *)port;
- unsigned char mcr = 0;
+ unsigned char mcr = 0, old_mcr;
dev_dbg(up->port.dev, "serial_omap_set_mctrl+%d\n", up->port.line);
if (mctrl & TIOCM_RTS)
@@ -503,8 +503,10 @@ static void serial_omap_set_mctrl(struct uart_port *port,
unsigned int mctrl)
mcr |= UART_MCR_LOOP;
pm_runtime_get_sync(&up->pdev->dev);
- up->mcr = serial_in(up, UART_MCR);
- up->mcr |= mcr;
+ old_mcr = serial_in(up, UART_MCR);
+ old_mcr &= ~(UART_MCR_LOOP | UART_MCR_OUT2 | UART_MCR_OUT1 |
+ UART_MCR_DTR | UART_MCR_RTS);
+ up->mcr = old_mcr | mcr;
serial_out(up, UART_MCR, up->mcr);
pm_runtime_put(&up->pdev->dev);
}
--
1.7.4.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
