From: Kevin Hilman <khil...@ti.com>
After commit 24d7b40a60cf19008334bcbcbd98da374d4d9c64 (ARM: OMAP2+:
PM: MPU DVFS: use generic CPU device for MPU-SS), OPPs are registered
using an existing CPU device, not the omap_device for MPU-SS.
First, fix the board file to use get_cpu_device() as required by the
above commit, otherwise custom OPPs will be added to the wrong device.
Second, the board files OPP init is called from the its init_machine
method, and the generic CPU devices are not yet created when
init_machine is run. Therefore OPP initialization will fail. To fix,
use a device_initcall() for the board file's OPP customization, and
make the device_initcall board-specific by using a machine_is check.
Reported-by: Paul Walmsley <p...@pwsan.com>
Signed-off-by: Kevin Hilman <khil...@ti.com>
---
v2: add machine_is* check to the device_initcall.
arch/arm/mach-omap2/board-omap3beagle.c | 20 ++++++++++++--------
1 file changed, 12 insertions(+), 8 deletions(-)
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c
b/arch/arm/mach-omap2/board-omap3beagle.c
index 388c431..60729bf 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -24,6 +24,7 @@
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/opp.h>
+#include <linux/cpu.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
@@ -444,12 +445,16 @@ static struct omap_board_mux board_mux[] __initdata = {
};
#endif
-static void __init beagle_opp_init(void)
+static int __init beagle_opp_init(void)
{
int r = 0;
- /* Initialize the omap3 opp table */
- if (omap3_opp_init()) {
+ if (!machine_is_omap3_beagle())
+ return 0;
+
+ /* Initialize the omap3 opp table if not already created. */
+ r = omap3_opp_init();
+ if (IS_ERR_VALUE(r) && (r != -EEXIST)) {
pr_err("%s: opp default init failed\n", __func__);
return;
}
@@ -458,13 +463,13 @@ static void __init beagle_opp_init(void)
if (cpu_is_omap3630()) {
struct device *mpu_dev, *iva_dev;
- mpu_dev = omap_device_get_by_hwmod_name("mpu");
+ mpu_dev = get_cpu_device(0);
iva_dev = omap_device_get_by_hwmod_name("iva");
if (IS_ERR(mpu_dev) || IS_ERR(iva_dev)) {
pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n",
__func__, mpu_dev, iva_dev);
- return;
+ return -ENODEV;
}
/* Enable MPU 1GHz and lower opps */
r = opp_enable(mpu_dev, 800000000);
@@ -484,8 +489,9 @@ static void __init beagle_opp_init(void)
opp_disable(iva_dev, 660000000);
}
}
- return;
+ return 0;
}
+device_initcall(beagle_opp_init);
static void __init omap3_beagle_init(void)
{
@@ -522,8 +528,6 @@ static void __init omap3_beagle_init(void)
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
-
- beagle_opp_init();
}
MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
--
1.8.0
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
