Hi,

On Mon, Oct 22, 2012 at 04:27:08PM +0300, Felipe Balbi wrote:
> On Mon, Oct 22, 2012 at 03:59:28PM +0300, Felipe Balbi wrote:
> > prepare() is supposed to prevent new children from
> > being registered. On the MMC subsystem, children
> > (new cards) registration starts with the card
> > detect IRQ.
> > 
> > Move card detect IRQ disabling to prepare() so that
> > no new cards will be registered while we're trying
> > to suspend.
> > 
> > Likewise, move card detect IRQ enabling to complete()
> > so we only try to register new children after our MMC
> > IP is back up.
> > 
> > Signed-off-by: Felipe Balbi <ba...@ti.com>
> > ---
> > 
> > Venkat, do you think the patch below makes sense ?
> 
> btw, just checked suspend to ram with beagle and panda. We still have
> our filesystem after waking up.
> 
> ps: you will [1] to test it:
> 
> [1] http://marc.info/?l=linux-arm-kernel&m=135090724817604&w=2

ping

> 
> > diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
> > index 54bfd0c..4c8b41e 100644
> > --- a/drivers/mmc/host/omap_hsmmc.c
> > +++ b/drivers/mmc/host/omap_hsmmc.c
> > @@ -2022,6 +2022,26 @@ static int __devexit omap_hsmmc_remove(struct 
> > platform_device *pdev)
> >  }
> >  
> >  #ifdef CONFIG_PM
> > +static int omap_hsmmc_prepare(struct device *dev)
> > +{
> > +   struct omap_hsmmc_host *host = dev_get_drvdata(dev);
> > +
> > +   if (host->pdata->suspend)
> > +           return host->pdata->suspend(dev, host->slot_id);
> > +
> > +   return 0;
> > +}
> > +
> > +static int omap_hsmmc_complete(struct device *dev)
> > +{
> > +   struct omap_hsmmc_host *host = dev_get_drvdata(dev);
> > +
> > +   if (host->pdata->resume)
> > +           return host->pdata->resume(dev, host->slot_id);
> > +
> > +   return 0;
> > +}
> > +
> >  static int omap_hsmmc_suspend(struct device *dev)
> >  {
> >     int ret = 0;
> > @@ -2035,23 +2055,10 @@ static int omap_hsmmc_suspend(struct device *dev)
> >  
> >     pm_runtime_get_sync(host->dev);
> >     host->suspended = 1;
> > -   if (host->pdata->suspend) {
> > -           ret = host->pdata->suspend(dev, host->slot_id);
> > -           if (ret) {
> > -                   dev_dbg(dev, "Unable to handle MMC board"
> > -                                   " level suspend\n");
> > -                   host->suspended = 0;
> > -                   return ret;
> > -           }
> > -   }
> >     ret = mmc_suspend_host(host->mmc);
> >  
> >     if (ret) {
> >             host->suspended = 0;
> > -           if (host->pdata->resume) {
> > -                   if (host->pdata->resume(dev, host->slot_id))
> > -                           dev_dbg(dev, "Unmask interrupt failed\n");
> > -           }
> >             goto err;
> >     }
> >  
> > @@ -2088,12 +2095,6 @@ static int omap_hsmmc_resume(struct device *dev)
> >     if (!(host->mmc->pm_flags & MMC_PM_KEEP_POWER))
> >             omap_hsmmc_conf_bus_power(host);
> >  
> > -   if (host->pdata->resume) {
> > -           ret = host->pdata->resume(dev, host->slot_id);
> > -           if (ret)
> > -                   dev_dbg(dev, "Unmask interrupt failed\n");
> > -   }
> > -
> >     omap_hsmmc_protect_card(host);
> >  
> >     /* Notify the core to resume the host */
> > @@ -2109,8 +2110,10 @@ static int omap_hsmmc_resume(struct device *dev)
> >  }
> >  
> >  #else
> > +#define omap_hsmmc_prepare NULL
> > +#define omap_hsmmc_complete        NULL
> >  #define omap_hsmmc_suspend NULL
> > -#define omap_hsmmc_resume          NULL
> > +#define omap_hsmmc_resume  NULL
> >  #endif
> >  
> >  static int omap_hsmmc_runtime_suspend(struct device *dev)
> > @@ -2138,6 +2141,8 @@ static int omap_hsmmc_runtime_resume(struct device 
> > *dev)
> >  static struct dev_pm_ops omap_hsmmc_dev_pm_ops = {
> >     .suspend        = omap_hsmmc_suspend,
> >     .resume         = omap_hsmmc_resume,
> > +   .prepare        = omap_hsmmc_prepare,
> > +   .complete       = omap_hsmmc_complete,
> >     .runtime_suspend = omap_hsmmc_runtime_suspend,
> >     .runtime_resume = omap_hsmmc_runtime_resume,
> >  };
> > -- 
> > 1.8.0.rc0
> > 


-- 
balbi

Attachment: signature.asc
Description: Digital signature

Reply via email to