Hi, The aim of this series is to enable using DSI PLL as the pixel clock source for DPI output. There are the following main parts:
* first 4 patches are slightly related generic improvements/fixes * fix DSI PLL problem related to non-50% duty cycle * fix DSI PLL problem related to powering * changes to the clock handling to always use DSI PLL for DPI when possible I've tested the series on OMAP4 Panda, OMAP4 SDP and OMAP3 Beagle. Tomi Tomi Valkeinen (12): OMAPFB: remove use of extended edid block OMAPFB: improve mode selection from EDID OMAPDSS: fix DPI & DSI init order OMAPDSS: fix DSI2 PLL clk names OMAPDSS: DSI: skip odd dividers when pck >= 100MHz OMAPDSS: DSI: workaround for HSDiv problem OMAPDSS: add dss_calc_clock_rates() back OMAPDSS: setup default dss fck OMAPDSS: hide dss_select_dispc_clk_source() OMAPDSS: DPI: use dpi.dsidev to see whether to use dsi pll OMAPDSS: DPI: verify if DSI PLL is operational OMAPDSS: DPI: always use DSI PLL if available drivers/video/omap2/dss/core.c | 12 ++-- drivers/video/omap2/dss/dpi.c | 99 +++++++++++++++++++++--------- drivers/video/omap2/dss/dsi.c | 14 ++++- drivers/video/omap2/dss/dss.c | 67 +++++++++++++++++++- drivers/video/omap2/dss/dss.h | 2 +- drivers/video/omap2/dss/hdmi.c | 8 --- drivers/video/omap2/omapfb/omapfb-main.c | 16 ++--- 7 files changed, 160 insertions(+), 58 deletions(-) -- 1.7.10.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html