On Oct 31, 2012, at 7:52 PM, Lars-Peter Clausen wrote:
> On 11/01/2012 04:24 PM, Pantelis Antoniou wrote:
>> Add an IIO map interface that consumers can use.
>
> Hi,
>
> Looks like you overlooked the review comments I had inline last time. I've
> put them in again, see below.
>
>>
>> Signed-off-by: Pantelis Antoniou <pa...@antoniou-consulting.com>
>> ---
>> drivers/iio/adc/ti_am335x_adc.c | 60
>> +++++++++++++++++++++++++++++++++--------
>> 1 file changed, 49 insertions(+), 11 deletions(-)
>>
>> diff --git a/drivers/iio/adc/ti_am335x_adc.c
>> b/drivers/iio/adc/ti_am335x_adc.c
>> index 02a43c8..8595a90 100644
>> --- a/drivers/iio/adc/ti_am335x_adc.c
>> +++ b/drivers/iio/adc/ti_am335x_adc.c
>> @@ -20,8 +20,9 @@
>> #include <linux/slab.h>
>> #include <linux/interrupt.h>
>> #include <linux/platform_device.h>
>> -#include <linux/io.h>
>> #include <linux/iio/iio.h>
>> +#include <linux/iio/machine.h>
>> +#include <linux/iio/driver.h>
>>
>> #include <linux/mfd/ti_am335x_tscadc.h>
>> #include <linux/platform_data/ti_am335x_adc.h>
>> @@ -29,6 +30,8 @@
>> struct tiadc_device {
>> struct ti_tscadc_dev *mfd_tscadc;
>> int channels;
>> + char *buf;
>
> buf doesn't seem to be used anywhere
>
Duh
>> + struct iio_map *map;
>> };
>>
>> static unsigned int tiadc_readl(struct tiadc_device *adc, unsigned int reg)
>> @@ -72,27 +75,62 @@ static void tiadc_step_config(struct tiadc_device
>> *adc_dev)
>> tiadc_writel(adc_dev, REG_SE, STPENB_STEPENB);
>> }
>>
>> -static int tiadc_channel_init(struct iio_dev *indio_dev, int channels)
>> +static int tiadc_channel_init(struct iio_dev *indio_dev,
>> + struct tiadc_device *adc_dev)
>> {
>> struct iio_chan_spec *chan_array;
>> - int i;
>> -
>> - indio_dev->num_channels = channels;
>> - chan_array = kcalloc(indio_dev->num_channels,
>> - sizeof(struct iio_chan_spec), GFP_KERNEL);
>> + struct iio_chan_spec *chan;
>> + char *s;
>> + int i, len, size, ret;
>> + int channels = adc_dev->channels;
>>
>> + size = channels * (sizeof(struct iio_chan_spec) + 6);
>> + chan_array = kzalloc(size, GFP_KERNEL);
>> if (chan_array == NULL)
>> return -ENOMEM;
>>
>> - for (i = 0; i < (indio_dev->num_channels); i++) {
>> - struct iio_chan_spec *chan = chan_array + i;
>> + /* buffer space is after the array */
>> + s = (char *)(chan_array + channels);
>> + chan = chan_array;
>> + for (i = 0; i < channels; i++, chan++, s += len + 1) {
>> +
>> + len = sprintf(s, "AIN%d", i);
>> +
>> chan->type = IIO_VOLTAGE;
>> chan->indexed = 1;
>> chan->channel = i;
>> - chan->info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT;
>> + chan->datasheet_name = s;
>> + chan->scan_type.sign = 'u';
>> + chan->scan_type.realbits = 12;
>> + chan->scan_type.storagebits = 32;
>> + chan->scan_type.shift = 0;
>
> The scan type assignment should go in a separate patch if possible.
ok.
>
>> }
>>
>> indio_dev->channels = chan_array;
>> + indio_dev->num_channels = channels;
>> +
>> + size = (channels + 1) * sizeof(struct iio_map);
>> + adc_dev->map = kzalloc(size, GFP_KERNEL);
>> + if (adc_dev->map == NULL) {
>> + kfree(chan_array);
>> + return -ENOMEM;
>> + }
>> +
>> + for (i = 0; i < indio_dev->num_channels; i++) {
>> + adc_dev->map[i].adc_channel_label =
>> chan_array[i].datasheet_name;
>> + adc_dev->map[i].consumer_dev_name = "any";
>> + adc_dev->map[i].consumer_channel = chan_array[i].datasheet_name;
>> + }
>> + adc_dev->map[i].adc_channel_label = NULL;
>> + adc_dev->map[i].consumer_dev_name = NULL;
>> + adc_dev->map[i].consumer_channel = NULL;
>
> The map should be passed in via platform data or similar. All the fields of
> the map depend on the specific user, so you can't use a generic map. In fact
> if we were able to use a generic map, we wouldn't need a map at all.
There's no platform data in the board I'm using. It's board-generic using
device tree only.
>
>> +
>> + ret = iio_map_array_register(indio_dev, adc_dev->map);
>> + if (ret != 0) {
>> + kfree(adc_dev->map);
>> + kfree(chan_array);
>> + return -ENOMEM;
>> + }
>>
>> return indio_dev->num_channels;
>> }
>> @@ -168,7 +206,7 @@ static int __devinit tiadc_probe(struct platform_device
>> *pdev)
>>
>> tiadc_step_config(adc_dev);
>>
>> - err = tiadc_channel_init(indio_dev, adc_dev->channels);
>> + err = tiadc_channel_init(indio_dev, adc_dev);
>> if (err < 0)
>> goto err_free_device;
>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
