On 11/08/12 18:20, Tony Lindgren wrote: > * Igor Grinberg <grinb...@compulab.co.il> [121107 23:15]: >> On 11/07/12 19:33, Tony Lindgren wrote: >>> >>> I think this should be the default for the timers as that counter >>> does not stop during deeper idle states. >> >> Well, it is the default as you can see from the patch. >> The problem is that for boards that for some reason do not have >> the 32k wired and rely on MPU/GP timer source, the default will not work >> and currently there is no way for board to specify which timer source >> it can use. > > Yes. I was just wondering if we can avoid patching all the board > files by doing it the other way around by introducing a new > omap_gp_timer rather than renaming all the existing ones?
Is the renaming that bad? One line per machine_desc structure? Of course we can skip the renaming, but then it will be less consistent and will not reflect the actual timer source used. I tried to make it flexible as much as possible and self explanatory. So above are my considerations, but at this point in time I don't really care if we rename them or just add a new one, but we have to get rid of the ugly fall back. > >> We have discussed this in San Diego (remember?) and you actually proposed >> this way as a solution. Well, may be I took it a bit further than you >> thought, but this is because the board code cannot know which timer source >> should be used at runtime and the fall back described below, does not work. > > Yes thanks I agree we should get rid of that Kconfig option for sure. > >>>> --- a/arch/arm/mach-omap2/board-2430sdp.c >>>> +++ b/arch/arm/mach-omap2/board-2430sdp.c >>>> @@ -284,6 +284,6 @@ MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board") >>>> .handle_irq = omap2_intc_handle_irq, >>>> .init_machine = omap_2430sdp_init, >>>> .init_late = omap2430_init_late, >>>> - .timer = &omap2_timer, >>>> + .timer = &omap2_sync32k_timer, >>>> .restart = omap_prcm_restart, >>>> MACHINE_END >>>> --- a/arch/arm/mach-omap2/board-3430sdp.c >>>> +++ b/arch/arm/mach-omap2/board-3430sdp.c >>>> @@ -596,6 +596,6 @@ MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board") >>>> .handle_irq = omap3_intc_handle_irq, >>>> .init_machine = omap_3430sdp_init, >>>> .init_late = omap3430_init_late, >>>> - .timer = &omap3_timer, >>>> + .timer = &omap3_sync32k_timer, >>>> .restart = omap_prcm_restart, >>>> MACHINE_END >>> ... >>> >>> Can't we assume that the default timer is omap[234]_sync32k_timer to >>> avoid renaming the timer entries in all the board files? >> >> Hmmm... >> How will this work with the macros defining the sys_timer structure? >> I would also not want to hide the exact timer used under the default name. > > Can't you just add a new sys_timer (or a new macro) for GP only setups? Of course I can... but I tried to create a flexible generic code, so no meter how a board will be wired, you just need to specify which timer source it uses and be done with it. > >>> Then we just need a new timer entries for the hardware that does >>> not have the sycn32k_timer available? >> >> Well, I tried to make it small patch just for the hardware that needs it, >> but I always found some corner case where, IMHO, this does not work/look >> good. > > Can you explain a bit further? Yes, OMAP4 has its own "local" timer function, OMAP5 - the real time timer function, we have that fall back from 32k to gptimer for AM33xx and we also have the use_gptimer_clksrc parameter. All the above call the same timer source init functions at the end. > > I guess what I'm after is just to avoid renaming the existing > timers in the board-*.c files and only rename the ones that > need gp timer only. This means: get rid of the 32k to gptimer fall back. I've got your point, will cook something shortly. -- Regards, Igor. -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
